Well-posedness of two pseudo-parabolic problems for electrical conduction in heterogeneous media

We prove a well-posedness result for two pseudo-parabolic problems, which can be seen as two models for the same electrical conduction phenomenon in heterogeneous media, neglecting the magnetic field. One of the problems is the concentration limit of the other one, when the thickness of the dielectric inclusions goes to zero. The concentrated problem involves a transmission condition through interfaces, which is mediated by a suitable Laplace-Beltrami type equation.     

Determination of anions in rainwater by capillary electrophoresis with conductivity detection

A routine method for the determination of chloride, nitrate and sulfate anions in rainwater by capillary electrophoresis was developed. The system uses an end-column non-suppressed conductivity detector. Linear calibration plots were generated from 0.050 to 20 mg/l, which is the range generally found in wet depositions. Accuracy and precision were evaluated by analyzing certified standards of simulated rainwater and environmental samples, or by comparing CE results with those obtained by IC, the reference technique for anion analysis in wet deposition. The reproducibility of the method was satisfactory except at the lower and upper limits of the analytical range. Sensitivity lay in the range of few μg/l.     

Studies on the synthesis of heterocyclic compounds. VII. Action of acyl halides on heterocyclic compounds containing the O-M-O (M  P,As, Sb) bond in the ring

The action of acyl halides on heterocyclic compounds of five-membered rings containing an O-M-O (M ? P, As, Sb) linkage is described. The reactions were either carried out in the presence of a solvent (benzene or toluene) or by direct heating of the reagent with the substrate. In the case of arsole, stibole and stannole derivatives, the cleavage of O-M bond and the formation of the respective mono- and diesters were always obtained, while with the phospholes, no cleavage of the compounds was observed. The products IIa-c (M = Sb) have been obtained in excellent yields starting from VIa-c and antimony trichloride. The structure of the compounds which were prepared was determined by analytical and spectroscopic methods and also by comparations with authentic samples where possible.     

Wavy graphene sheets from electrochemical sewing of corannulene

The presence of non-hexagonal rings in the honeycomb carbon arrangement of graphene produces rippled graphene layers with valuable chemical and physical properties. In principle, a bottom-up approach to introducing distortion from planarity of a graphene sheet can be achieved by careful insertion of curved polyaromatic hydrocarbons during the growth of the lattice. Corannulene, the archetype of such non-planar polyaromatic hydrocarbons, can act as an ideal wrinkling motif in 2D carbon nanostructures. Herein we report an electrochemical bottom-up method to obtain egg-box shaped nanographene structures through a polycondensation of corannulene that produces a new conducting layered material. Characterization of this new polymeric material by electrochemistry, spectroscopy, electron microscopy (SEM and TEM), scanning probe microscopy, and laser desorption-ionization time of flight mass spectrometry provides strong evidence that the anodic polymerization of corannulene, combined with electrochemically induced oxidative cyclodehydrogenations (Scholl reactions), leads to polycorannulene with a wavy graphene-like structure.

A bottom-up synthesis of wavy graphene structures obtained through an anodic polymerization process, combined with an electrochemically triggered oxidative cyclodehydrogenation, of the bowl-shaped polyaromatic hydrocarbon corannulene.     

An electroactive nickel containing polymeric film obtained by electrochemical reduction of an aryl-nickel derivative

The electrochemical reduction of [Ni(PPh₃)₂(p-C₆H₄Br)Br] in acetonitrile results in a polymeric coating of a nickel-containing poly-p-phenylene, formulated as [-Ni(p-C₆H₄)_n-] (n=6?7) on the basis of elemental analysis, IR, UV, MS and ESCA measurements. This coating is found to undergo a two-electron reversible reduction and a one-electron reversible oxidation with a large potential window (3.6 V), without the polymeric film being destroyed. Moreover, the polymer obtained is shown to be electroactive towards dissolved reactants via permeation or mediated electron transfer, depending on the molecular size of the electroactive species employed.     

Semiclassical study of collision-induced predissociation: Comparison of the Landau-Zener model with the method of analytic continuation

Semiclassical calculations are carried out by two methods for the problem of collision-induced predissociation of electronically excited I₂. The first method is that of surface-hopping with the Landau-Zener model. The second method is similar to surface-hopping, except that analytic continuation of the adiabatic potential energy surfaces replaces the Landau-Zener model. Results of the calculations by the two methods compare favorably with each other and with experiment. The possible advantages of the second method are discussed.Camille and Henry Dreyfus Teacher-Scholar, Alfred P. Sloan Research Fellow.     

Group contributions to the thermodynamic properties of non-ionic organic solutes in dilute aqueous solution

The thermodynamic properties G _h ^o,H _h ^o, and C _p,h ^oassociated with the transfer of non-ionic organic compounds from gas to dilute aqueous solution and the limiting partial molar properties C _p ^o ,2 and V₂ ² of these compounds in water are described through a simple scheme of group contributions. A distinction is made between groups made only of carbon and hydrogen, and functional groups i.e. groups containing at least one atom different from carbon and hydrogen. Each group is assigned a contribution, for each property, through a least squares procedure which utilizes only molecules containing at most one functional group. Finally, for compounds containing more than one functional group, correction parameters are evaluated as the differences between the experimental values and those calculated by means of the group contributions. The different behavior of hydrophilic compared with hydrophobic groups is discussed for the various properties. A rationale for the correction parameters, i.e. for the effects of the interactions among hydrophilic groups on the thermodynamic properties, is attempted.     

Energy controlled insertion of polar molecules in dense fluids

We present a method to search low energy configurations of polar molecules in the complex potential energy surfaces associated with dense fluids. The search is done in the configurational space of the translational and rotational degrees of freedom of the molecule, combining steepest-descent and Newton-Raphson steps which embed information on the average sizes of the potential energy wells obtained from prior inspection of the liquid structure. We perform a molecular dynamics simulation of a liquid water shell which demonstrates that the method enables fast and energy-controlled water molecule insertion in aqueous environments. The algorithm finds low energy configurations of incoming water molecules around three orders of magnitude faster than direct random insertion. This method represents an important step towards dynamic simulations of open systems and it may also prove useful for energy-biased ensemble average calculations of the chemical potential.     

Electron capture ionization of explosives with a microflow rate particle beam interface

A method for the analysis of four widely used explosives based on reversed-phase liquid chromatography coupled to a quadrupole mass spectrometer is presented. A microflow rate particle beam interface was employed that offers simplified operation procedures and improved interfacing performance. A positive role played by the reduced size of the aerosol droplets generated by the microflow rate interface is outlined in this work. Greater vaporization efficiency and negligible thermal decomposition were observed for the selected compounds in the ion source of the mass spectrometer. Electron capture ionization allowed specific and sensitive determination of the analytes. Detection limits that ranged between 60 and 200 pg and had a signal-to-noise ratio of 5:1 were obtained in selected ion monitoring mode after column elution.     

Electron impact mass spectrometry of some macrocyclic polyether lactones

Electron impact mass spectrometry has been used together with linked scans, exact mass measurements and mass-analysed ion kinetic energy spectrometry to study nine inacrocyclic polyether lactones in detail. The presence of abundant hydrogenated oxirane ions has been observed for all the compounds examined, and confirmed by kinetic energy release measurements.