Acridone-Based Host Materials for Green Phosphorescent and Thermally Activated Delayed Fluorescent OLEDs with Low-Efficiency Roll-Offs

By linking the carbazole unit to the nitrogen atom of acridone through phenyl or pyridyl, two compounds, named 10-(4-(9H-carbazol-9-yl)phenyl)acridin-9(10H)-one (AC-Ph-Cz) and 10-(5-(9H-carbazol-9-yl)pyridin-2-yl)acridin-9(10H)-one (AC-Py-Cz) were designed and synthesized. These two materials, characterized with highly twisted and rigid structure, good thermal stability, and balanced carrier-transporting properties, were employed as host materials for green phosphorescent and thermally activated delayed fluorescent organic light-emitting diodes (OLEDs). The carbazole group, despite its small contribution to the highest occupied molecular orbitals (HOMOs) of these two materials, plays an essential role as an intramolecular host in energy delivering and improving the hole transporting ability of these two hosts. The incorporation of the electron-deficient pyridyl group as a linking group slightly improves the electron transporting capability of AC-Py-Cz. The green phosphorescent OLED (PhOLED) based on AC-Py-Cz exhibited excellent device performance with a turn-on voltage of 2.5 V, a maximum power efficiency and an external quantum efficiency (η_ext) of 89.8 lm W⁻¹ and 25.2 %, respectively, benefitting from the better charge-balancing ability of AC-Py-Cz host due to the presence of the pyridyl bridge. More importantly, all the devices based on these two hosts showed low efficiency roll-off at high brightness due to the suppressed non-radiative transition in the emitting layer. In particular, the AC-Py-Cz-hosted green PhOLED exhibited an efficiency roll-off of 1.6 % from the maximum next at a high brightness of 1000 cd m⁻² and a roll-off of 15.9 % at an extremely high brightness of 10000 cd m⁻². This study manifests that acridone-based host materials have great potential in fabricating OLEDs with low efficiency roll-off.     

EAST装置上W波段多道极向相关反射仪的研制

在EAST装置上安装了X模极化W波段多道相关反射仪，用于测量等离子体芯部密度涨落。该诊断利用低损耗(<3dB)多工器将4个不同频率(79.2GHz，85.2GHz，91.8GHz和96GHz)的微波耦合在一起，通过同一个天线发射。反射波由两个极向分离(~5cm)的天线接收，通过下变频技术实现外差测量。通过对两个极向天线接收的信号进行相关分析，获得芯部湍流垂直速度。对2018年低约束模式(L模)放电进行分析发现，在电子回旋共振加热(ECRH)等离子体中，芯部湍流垂直速度在电子逆磁漂移方向。而在注入同向中性束(co-NBI)后，芯部湍流垂直速度变为离子逆磁漂移方向。     

中国生物医学超声联合学术年会(CUMB2019)在北京举行

2019年10月18日–20日,中国声学学会生物医学超声工程分会、中国生物医学工程学会医学超声分会与中国超声医学工程学会仪器工程开发专业委员会在北京联合主办了“2019年度中国生物医学超声联合学术年会”,同期共同举办的还有国际分子影像与微创治疗大会、国际肌肉骨骼及浅表器官超声研讨会和国际生物医学造影技术会议。     

Darboux Transformation for Tzitzeica Equation

We present a Darboux transformation for Tzitzeica equation associated with 3 × 3 matrix spectral problem. The explicit solution of Tzitzeica equation is obtained.     

Sansalvamide A固相合成新方法

报道了Pd催化丁基二乙基硅烷树脂与N-Boc-4-溴代苯丙氨酸甲酯直接反应形成Si—Ar键一步构建出硅基连接分子的新方法, 并采用Boc策略增长肽链, 以PyBOP (benzotriazole-1-yl-oxy-tris-pyrrolidino-phosphonium hexafluoro- phosphate)为环合剂固相合成了sansalvamide A.     

高压电场作用下乙醇-水溶液体系变化红外光谱分析

本文报道了用红外光谱分析电磁场作用下乙醇 水溶液体系变化情况。分析结果表明 :当乙醇溶液受到 2 0kV·cm- 1 的交变电磁场处理 (5 0Hz)时 ,分子之间的氢键缔合先增大后减少 ;高乙醇含量溶液受到同样强度电场较长时间处理时 ,有乙醇发生氧化反应 ,从红外谱中可看到νCO 峰及ν(OH) (H2 O) 峰的出现 ;经处理后的溶液自然放置 7天再测定 ,其红外谱图基本保持不变。文中对各出现变化的峰进行了分析 ,并对其机理进行了推导     

液体可视图象序列中杂质小目标的检测方法

在分析红外图象和视图象差异的基础上，研究了一种适用于可视图像序列的运动小目标检测算法。受目标影响的象素点具有较弱的时间相关性，即相对普通象素点有较大的时间方差，根据此特征，用管道更新的方法产生新方差图象序列，再用管道更新的方法累积，增加信噪比，然后用基于统计均值的自适应门限方法分割出目标，最后将原图象的梯度倒数作为象素点强度的加权，有效地抑制灰度突变边界的传感器噪音，保存目标点。     

Darboux Transformation of a Differential-Difference Equation and Its Explicit Solutions

The Darboux transformation of a differential-difference equation associated with a 3 × 3 matrix spectral problem is derived. As an application, explicit soliton solutions of the differential-difference equation are presented.     

Focused ion beam Moiré method

A focused ion beam (FIB) Moiré method is proposed to measure the in-plane deformation of object in a micrometer scale. The FIB Moiré is generated by the interference between a prepared specimen grating and FIB raster scan lines. The principle of the FIB Moiré is described. The sensitivity and accuracy of deformation measurement are discussed in detail. Several specimen gratings with 0.14 and 0.20 μm spacing are used to generate FIB Moiré patterns. The FIB Moiré method is successfully used to measure the residual deformation in a micro-electro-mechanical system structure after removing the SiO₂ sacrificial layer with a 5000 lines/mm grating. The results demonstrate the feasibility of this method.