A Scanning Electron Microscopy study of water in soil

Cold stage Scanning Electron Microscopy (SEM) with a rapid cooling technique makes it possible to investigate the water phase within unsaturated porous media. It is thought that this technique preserves the main features of the micromorphology of the water menisci as it exists in the liquid phase in soils. Saddle-shaped elements, as well as pendular rings of water, were observed with concave and convex curvatures of the water-air interface. The hydraulic conductivity of an unsaturated soil may be inferred from SEM photographs. Observations of isolated water menisci indicate the existence of an immobile water domain. The surface geometry of the water menisci was analyzed quantitatively and surface tension and capillary pressure were determined.     

Improvement of the properties of polyarylate reinforced with liquid crystalline polymers

Blends of polyarylate of bisphenol A, PAr, with two commercial main chain liquid crystalline polymers, Vectra A950 and Vectra B950, are studied. From dynamic viscoelastic measurements it is deduced that both systems (PAr/Vectra A950 and PAr/Vectra B950) are immiscible and scanning electron microscopy (SEM) micrographs show the presence of spherical domains of the liquid crystalline polymer when PAr constitutes the matrix. Extrusion capillary measurements reveal that, under conditions of temperature and shear rate similar to those of processing, the viscosity is reduced to approximately 10% of its value when the content of liquid crystalline polymer is only 20%. This great improvement of the rheological properties is observed in both PAr/Vectra A950 and PAr/Vectra B950 blends. The effect of draw ratio on Young's modulus for different compositions is also analyzed, pointing out the reinforcing action of both liquid crystalline polymers on polyarylate: for instance, 20% of Vectra B950 in the blend gives rise to a 700% increase of the modulus of fibres prepared at a draw ratio of 50. SEM of the extrudates reveals that the spherical domains are elongated at the entrance of the capillary giving rise to a microfibrillar morphology which is related to the excellent rheological and mechanical properties of the blends.     

Photodynamic activity of dibiotinylated aluminum sulfophthalocyanine in vitro and in vivo

The photodynamic activity of dibiotinylated aluminum sulfophthalocyanine was studied in vitro and in vivo. Dibiotinylated aluminum sulfophthalocyanine provided enhanced phototoxic action on OAT-75 cell monolayers as compared with the parent drug. Photodynamic therapy of mice with Ehrlich carcinoma using dibiotinylated aluminum sulfophthalocyanine (0.25 mg/kg) resulted in enhanced inhibition of tumor growth, pronounced vascular damage (thrombosis and destruction of vascular walls) and eventual tumor necrosis.     

Synthesis and optical properties of thiol-stabilized PbS nanocrystals

Thiol-capped water-soluble PbS nanocrystals (NCs) stabilized with 1-thioglycerol, dithioglycerol, or a mixture of 1-thioglycerol/dithioglycerol (TGL/DTG) were prepared via one-stage synthesis at room temperature. We found that NCs stabilized with a TGL/DTG mixture show efficient and stable infrared photoluminescence centered in the second "biological window" (1050-1200 nm). Under optimized conditions, full width at half-maximum of the PL emission peak was from 70 to 100 nm. PbS NCs were stable to precipitation and aggregation for the time period from 2 to 3 months when stored in the dark under room temperature. Room-temperature photoluminescence quantum efficiency of NCs was from 7 to 10%. When NCs were stored at 37 degrees C, their PL emission red-shifted, consistent with the NC growth.     

Biocatalytic synthesis of polymers. III. Formation of a high molecular weight polyester through limitation of hydrolysis by enzyme-bound water and through equilibrium control

Enzyme-catalyzed preparation of polymers offers several potentially valuable advantages over the usual polymerization procedures and has been studied for several years. A significant limitation on the polyesters prepared to date has been the low molecular weights achieved. The present studies have established that, in the polycondensation of bis(2,2,2-trifluoroethyl) glutarate with 1,4-butanediol using porcine pancreatic lipase as the catalyst, this limitation arises from at least two sources: hydrolysis of activated ester end groups by water introduced along with the enzyme and the polymerization's reaching equilibrium despite using the poorly nucleophilic 2,2,2-trifluoroethanol as the leaving group. Evidence is also developed that the presence of trifluoroethanol accelerates the release of the enzyme-bound water which hydrolyzes the activated ester end groups. The hydrolysis could be avoided by choosing a relatively high-boiling solvent, such as bis(2-ethoxyethyl) ether, then removing the trifluoroethanol by placing the reaction mixture under vacuum periodically or by drying the enzyme rigorously. The vacuum method also removed the limitation on molecular weight resulting from the reaction's reaching equilibrium. A further improvement in the molecular weight to nearly 40,000 daltons, well within the range that is technically interesting, was achieved by using 1,2-dimethoxybenzene or 1,3-dimethoxybenzene as the polymerization solvent. © 1995 John Wiley & Sons, Inc.     

Microfluidics: from dynamic lattices to periodic arrays of polymer disks

We used coupling of flow and geometric confinement to assemble emulsion droplets in two-dimensional gliding lattices with a high degree of order and symmetry. Highly monodisperse discoid droplets with circular shapes were generated in a microfluidic flow-focusing device. Originally, close-packed lattices formed from these circular discoid droplets. Progressive confinement led to the gradual deformation of the circular disks: first, they elongated in the direction parallel to the direction of flow and then transformed into hexagons. Assembly driven by the combination of flow and confinement also allowed for the formation of lattices from droplets with a bimodal size distribution. We used photopolymerization of the monomer droplets to trap the lattice structure in the solid state and produce highly periodic arrays of solid polymer disks.     

Synthesis and characterization of a novel tantalum chalcogen-rich molecular cluster with square planar metal core

Black single crystals of Ta(4)Se(9)I(8) are obtained in a high yield by heating Ta, Se, and I(2) at 300 degrees C in 1:2.2:1.0 molar ratio. In the structure, the tantalum atoms form a square, with four Se(2) ligands bridging the Ta-Ta edges and one capping the square. Each Ta atom has two terminal iodine atoms. The compound is diamagnetic and has only two electrons for metal-metal bonding.     

Hybrid microgels photoresponsive in the near-infrared spectral range

We report for the first time a photothermally responsive composite material based on polymer microgel particles doped with gold nanorods. We used the dependence of the longitudinal surface plasmon of the gold nanorods on their aspect ratio to synthesize nanoparticles with strong absorption in the near-IR spectral range (in the "water window"). The nanoparticles were incorporated in the interior of temperature-responsive poly(N-isopropylacrylamide-acrylic acid) microgels. Upon irradiation at lambda = 810 nm, hybrid microgel particles doped with Au nanorods underwent a strong deswelling phase transition. These photothermally responsive microgels can be used to carry and release small molecules (e.g., small protein molecules and drugs).