Dendrimers as scaffolds for multifunctional reversible addition–fragmentation chain transfer agents: Syntheses and polymerization

The synthesis and characterization of novel first‐ and second‐generation true dendritic reversible addition–fragmentation chain transfer (RAFT) agents carrying 6 or 12 pendant 3‐benzylsulfanylthiocarbonylsulfanylpropionic acid RAFT end groups with Z‐group architecture based on 1,1,1‐hydroxyphenyl ethane and trimethylolpropane cores are described in detail. The multifunctional dendritic RAFT agents have been used to prepare star polymers of poly(butyl acrylate) (PBA) and polystyrene (PS) of narrow polydispersities (1.4 < polydispersity index < 1.1 for PBA and 1.5 < polydispersity index < 1.3 for PS) via bulk free‐radical polymerization at 60 °C. The novel dendrimer‐based multifunctional RAFT agents effect an efficient living polymerization process, as evidenced by the linear evolution of the number‐average molecular weight (M_n) with the monomer–polymer conversion, yielding star polymers with molecular weights of up to M_n = 160,000 g mol^?1 for PBA (based on a linear PBA calibration) and up to M_n = 70,000 g mol^?1 for PS (based on a linear PS calibration). A structural change in the chemical nature of the dendritic core (i.e., 1,1,1‐hydroxyphenyl ethane vs trimethylolpropane) has no influence on the observed molecular weight distributions. The star‐shaped structure of the generated polymers has been confirmed through the cleavage of the pendant arms off the core of the star‐shaped polymeric materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5877–5890, 2004     

Fluoride effect on the palladium–phenanthroline catalyzed carbonylation of nitroarenes to carbamates

Fluorides promote the palladium–phenanthroline catalyzed carbonylation of nitroarenes to carbamates. The effect is more evident on the rate of the reaction at short reaction times, but a positive effect on selectivity is also observed under certain conditions. The effect is observed even under conditions under which chloride inhibits the reaction. Tetraethylammonium is a better countercation than sodium. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface chemical studies of the influence of In and Al on the decomposition of TEG on GaAs(100)

The interaction of triethylgallium (TEG) with the Ga-stabilized GaAs(100) surface in the presence of In and Al has been investigated using AES (Auger electron spectroscopy), HREELS (high resolution electron energy loss spectroscopy) and TDS (thermal desorption spectroscopy) techniques. Al is shown to greatly increase the saturation surface coverage of TEG on the surface and to suppress the desorption of TEG and diethylgallium (DEG). Etching of the surface Al by TEG is observed, resulting in the formation of gas phase Al organic species. Alkyl migration from GA to Al centres occurs, and the presence of Al substantially enhances the irreversible deposition of C. In is found to enhance DEG desorption and to lower the temperature at which absorbed ethyl groups decompose to gas phase ethene. Computer modelling has been carried out to extract kinetic parameters from measured thermal desorption spectra. These parameters are then used to calculate expected partial growth rates of GaAs during the growth of Ga_xAl_1−xAs and Ga_xIn_1−xAs using TEG. The data provide a molecular level understanding of the GaAs pa rtial growth rate variations arising during the deposition of III–V ternary materials.     

Dimensionally and thermally stable polymer,containing disordered graphitic structure and adamantane

In an attempt to develop a low‐k interlayer dielectric, adamantane‐diphenyldiethynyl moiety containing oligomer is prepared. Oligomerization of 1,3,5,7‐tetrakis[3/4‐ethynylphenyl]adamantane ( 4 ) is accomplished by a Glaser–Hay oxidative coupling with 1,3,5‐triethynylbenzene and phenylacetylene end‐capping agent. The CHCl₃ soluble oligomer is then thermally treated by step‐curing at 200, 300, 380, and 450 °C for 30 min at each temperature under nitrogen flow to render a shiny void‐free black polymer. TGA analysis indicates that the polymer is stable under nitrogen up to 500 °C with a marginal decomposition up to 800 °C. Solid‐state ¹³C NMR, Raman scattering, and FTIR are used to characterize the structure of the polymer. The polymer consists of amorphous carbon networks with the adamantane moieties and nanosized graphitic regions (clusters), which are generated from the thermal crosslinking of the diphenyldiethynyl units. It shows a remarkably low linear coefficient of thermal expansion (～25 ppm/°C), presumably due to the presence of the disordered graphitic structure. Its high density (～1.21 g/cm³), refractive index (～1.80 at 632 nm), and Young's modulus (～17.0 GPa) are also consistent with the interpretation. This study reveals important details about the effect of microscopic structure on the macroscopic properties of the highly crosslinked polymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6909–6925, 2006     

Photochemical expulsion of the neutral monodentate ligand L in Ru(terpy*)(diimine)(L)2+: a dramatic effect of the steric properties of the spectator diimine ligand

A series of photoreactive complexes of the type Ru(terpy*)(N-N)(L)(2+), where terpy* is 4'-(3,5-ditertiobutylphenyl)-2,2':6',2' '-terpyridine, N-N is the bidentate chelate phen or dmp (phen = 1,10-phenanthroline, dmp = 2,9-dimethyl-1,10-phenanthroline), and L is the monodentate ligand dms, MeBN, or MeOBN (dms = dimethyl sulfide, MeBN = 2,6-dimethyl benzonitrile, MeOBN = 2,6-dimethoxybenzonitrile), has been synthesized and fully characterized by proton NMR spectroscopy, electrospray mass spectrometry, and UV-vis spectroscopy. The X-ray structures of four complexes were also obtained. In neat pyridine, the quantum yields for the photosubsitution of L by pyridine were measured and showed dramatic variations depending on the steric interactions between the spectator bidentate ligand and the leaving monodentate ligand L. The use of dmp instead of phen multiplied the photosubstitution efficiency by a factor of 20-50, depending on L. This effect could be qualitatively correlated to the distortions observed in the X-ray structures of the corresponding complexes. The highly distorted structure of Ru(terpy)(dmp)(dms)(PF(6))(2) showed a very high photosubsitution quantum yield phi = 0.36 in neat pyridine. The high photoreactivity of some of the compounds makes them particularly promising as components of future light-driven molecular machines.     

Structural determination of ruthenium-porphyrin complexes relevant to catalytic epoxidation of olefins

A reproducible synthesis of a competent epoxidation catalyst, [Ru(VI)(TPP)(O)2)] (TPP = tetraphenylporphyrin dianion), starting from [Ru(II)(TPP)(CO)L] (L = none or CH3OH), is described. The molecular structure of the complex was determined by using ab initio X-ray powder diffraction (XRPD) methods, and its solution behavior was in detail investigated by NMR techniques such as PGSE (pulsed field gradient spin-echo) measurements. [Ru(IV)(TPP)(OH)]2O, a reported byproduct in the synthesis of [Ru(VI)(TPP)(O)2], was synthesized in a pure form by oxidation of [Ru(II)(TPP)(CO)L] or by a coproportionation reaction of [Ru(VI)(TPP)(O)2] and [Ru(II)(TPP)(CO)L], and its molecular structure was then determined by XRPD analysis. [Ru(VI)(TPP)(O)2] can be reduced by dimethyl sulfoxide or by carbon monoxide to yield [Ru(II)(TPP)(S-DMSO)2] or [Ru(II)(TPP)(CO)(H2O)], respectively. These two species were characterized by conventional single-crystal X-ray diffraction analysis.     

Free-radical pathways in the decomposition of ketones over polycrystalline TiO(2): the role of organoperoxy radicals.

The oxidative decomposition of various ketones (including acetone, 2-butanone, 4-heptanone, cyclopentanone and cyclohexanone) over dehydrated TiO(2) (P25) powder is investigated by electron paramagnetic resonance (EPR) spectroscopy. For the first time, a series of thermally unstable radical intermediates are observed both on the activated and reduced TiO(2) surface, depending on the adopted experimental conditions. These radical intermediates are identified as organoperoxy-based species of general formula ROO(.-) and RCO(3) (.-). They are formed by reaction of photogenerated charge carriers (either trapped electrons or trapped holes) with the adsorbed ketones in the presence of molecular oxygen. The organoperoxy intermediates are thermally unstable and decompose at temperatures in the region of 180-250 K. This work demonstrates that free-radical pathways involving both organoperoxy and superoxide radicals can be responsible for the thermal- and photodecomposition of ketones over polycrystalline TiO(2) (P25).     

Catalytic (3 + 2) annulation of donor–acceptor aminocyclopropane monoesters and indoles

The efficient catalytic activation of donor–acceptor aminocyclopropanes lacking the commonly used diester acceptor is reported here in a (3 + 2) dearomative annulation with indoles. Bench-stable tosyl-protected aminocyclopropyl esters were converted into cycloadducts in 46–95% yields and up to 95 : 5 diastereomeric ratio using catalytic amounts of triethylsilyl triflimide. Tricyclic indoline frameworks containing four stereogenic centers including all-carbon quaternary centers were obtained.

A catalytic dearomatization of indoles with D–A aminocyclopropane monoesters for the synthesis of highly substituted indolines.