Ternary copper complexes for photocleavage of DNA by red light: direct evidence for sulfur-to-copper charge transfer and d-d band involvement

A new class of ternary copper(II) complexes of formulation [Cu(L(n)B](ClO(4)) (1-4), where HL(n) is a NSO-donor Schiff base (HL(1), HL(2)) and B is a NN-donor heterocyclic base viz. 1,10-phenanthroline (phen) and 2,9-dimethyl-1,10-phenanthroline (dmp), are prepared, structurally characterized, and their DNA binding and photocleavage activities studied in the presence of red light. Ternary complex [Cu(L(3))(phen)](ClO(4)) (5) containing an ONO-donor Schiff base and a binary complex [Cu(L(2))(2)] (6) are also prepared and structurally characterized for mechanistic investigations of the DNA cleavage reactions. While 1-4 have a square pyramidal (4 + 1) CuN(3)OS coordination geometry with the Schiff base bonded at the equatorial sites, 5 has a square pyramidal (4 + 1) geometry with CuN(3)O(2) coordination with the alcoholic oxygen at the axial site, and 6 has a square planar trans-CuN(2)O(2) geometry. Binding of the complexes 1-4 to calf thymus DNA shows the relative order: phen > dmp. Mechanistic investigations using distamycin reveal minor groove binding for the complexes. The phen complexes containing the Schiff base with a thiomethyl or thiophenyl moiety show red light induced photocleavage. The dmp complexes are essentially photonuclease inactive. Complexes 5 and 6 are cleavage inactive under similar photolytic conditions. A 10 microM solution of 1 displays a 72% cleavage of SC DNA (0.5 microg) on an exposure of 30 min using a 603 nm Nd:YAG pulsed laser (60 mJ/P) in Tris-HCl buffer (pH 7.2). Significant cleavage of 1 is also observed at 694 nm using a Ruby laser. Complex 1 is cleavage inactive under argon or nitrogen atmosphere. It shows a more enhanced cleavage in pure oxygen than in air. Enhancement of cleavage in D(2)O and inhibition with sodium azide addition indicate the possibility of the formation of singlet oxygen as a reactive intermediate leading to DNA cleavage. The d-d band excitation with red light shows significant enhancement of cleavage yield. The results indicate that the phen ligand is necessary for DNA binding of the complex. Both the sulfur-to-copper charge transfer band and copper d-d band excitations helped the DNA cleavage. While the absorption of a red photon induces a metal d-d transition, excitation at shorter visible wavelengths leads to the sulfur-to-copper charge transfer band excitation at the initial step of photocleavage. The excitation energy is subsequently transferred to ground state oxygen molecules to produce singlet oxygen that cleaves the DNA.     

Acidic peroxo salts. A new class of initiators for vinyl polymerization. I. Kinetics of polymerization of acrylonitrile initiated by potassium monopersulfate catalyzed by Ag(I)

The kinetics of polymerization of acrylonitrile initiated by KHSO₅ and catalyzed by Ag(I) have been investigated in an aqueous medium over the temperature range of 35–50°C. The rates of polymerization R_p have been calculated and studied with respect to monomer and initiator. The catalytic activity of various metal ions on the initiator has been determined from a comparison of R_p values. The effects of monomer, catalyst, neutral salts, various amines, and inhibitor (hydroquinone) on the initial rate as well as maximum conversion have been studied. From the kinetics results a suitable reaction scheme has been proposed.     

Thermodynamics of silver—silver halide electrodes and thermodynamic solubility products of silver halides in glycerol + water mixtures at different temperatures

The standard potentials of silver—silver bromide and silver—silver iodide electrodes in glycerol+water mixtures containing 5, 10, 20 and 30 wt% glycerol were determined from electromotive force measurements of the cell Ag(s), AgX(s), KX(c)//KCl(c), AgCl(s), Ag(s), where X is Br or I, at seven different temperatures in the range 5–35°C. The standard potentials in each solvent are represented as a function of temperature. The standard thermodynamic functions for the electrode reactions, the primary medium effects of various solvents upon X⁻, and the standard thermodynamic quantities for the transfer of 1 g-ion of X⁻ from water to the respective glycerol + water media are evaluated and discussed in the light of ion—solvent interactions as well as the structural changes of the solvents. From the values of the Ag/Ag⁺ and Ag/AgX, X⁻ electrodes, the thermodynamic solubility product constants of silver chloride, silver bromide and silver iodide have been determined in glycerol + water solvent mixtures at different temperatures.     

Doppler-broadening measurements of microvoids at the Au/GaAs interface

Recent positron lifetime studies made on the Au/GaAs interface with an applied electric field returning a significant fraction of bulk implanted positrons to the interface have revealed the presence of microvoids( 1 nm diameter) at the interface. In this work an attempt has been made to study these microvoids by observing the Doppler broadening on the annihilation radiation coming from them. This is done both by observing theS-parameter as a function of applied bias and by applying the generalized least-squares method to the deconvolution of the annihilation radiation lineshape. The general conclusion is that the Doppler-broadened data are consistent with the majority of positrons trapping into microvoids, probably associated with grain boundaries. The data suggest that these open volume defects are more associated with the Au film rather than the Au-Ga alloyed interfacial region.Paper presented at the 132nd WE-Heraeus-Seminar on Positron Studies of Semiconductor Defects, Halle, Germany, 29 August to 2 September 1994     

A zero differential overlap study of chemical binding in ammonia-borane and carbony l-borane

A cndo/2D study of the charge distribution obtained through Mulliken population analysis in the ground state of the title compounds shows that the features of charge distribution found by severalab initio calculations are fairly well reproduced by this method. The one-particle density, the interference density at the mid-point of the bond axis and the kinetic part of the interference energy calculated through the deorthogonalized density matrices over a wide range of intermolecular separation between the donor and the acceptor show that the one-particle density and the interference density steadily grow with decreasing internuclear separation, while the kinetic interference energy starts with negative value at large distance, then decreases and passes through a minima near but above the equilibrium distance and then increases rapidly below it conforming to the characteristic general behaviour of the kinetic component of Morse curve. The orbital pairwise interference density and the corresponding kinetic energy components reveal that the orbitals involved in the covalent binding are σ_2p AO of B and 2S and σ_2p AO of N and C atoms in H₃B-NH₃ and H₃B-CO respectively.     

Theoretical and experimental studies of asymmetric organozinc additions to benzaldehyde catalyzed by flexible and constrained gamma-amino alcohols

The cis-decalin based gamma-amino alcohols, 1-5, were synthesized, resolved, and employed as catalysts in the addition of organozincs to benzaldehyde. Despite large facial differentiation in the RZn adducts of the ligands, the enantioselectivities were found to be moderate. Transition structure calculations were done using several quantum chemical methods to examine the underlying causes of the selectivity for three gamma-amino alcohols, 1, 2, and 3. The tricyclic mu-oxo (6/4/4), rather than the bicyclic six-membered (6/6), transition structures were found to explain the observed enantioselectivity for 2 and 3. MP2 calculations gave the best correlation to the experimental results compared to B3LYP and HF calculations. The conformational flexibility of the chiral ligands was found to be an important factor in the selectivity.     

A samarium cyclooctatetraene complex as catalyst for hydroamination/cyclisation catalysis

The cyclooctatetraene-bis(phosphinimino)methanide complex [[CH(PPh2NSiMe3)2]Sm(eta8-C8H8)] has been prepared; although this compound has no alkyl or amide ligand it shows moderate activity as a catalyst for the hydroamination/cyclisation reaction.     

Metalloporphyrin-capped calix[4]pyrroles: heteroditopic receptor models for anion recognition and ligand fixation

Diametrically strapped calix[4]pyrrole-metalloporphyrin conjugates, potential hosts for anionic guests, have been synthesized and characterized. The syntheses rely on the acid-catalyzed condensation of two dipyrromethane bearing Ni(II) porphyrins with acetone. An (1)H NMR spectroscopic titration experiment indicated that the resulting receptors selectively trapped fluoride anions in organic media but not other, larger halide anions. The experimental results from titration and Job plots indicated that the bound fluoride anion must reside inside the cavity. The current systems provide a well-defined illustration of how size-selective anion receptors may be synthesized by incorporating recognition functions, such as Lewis acidity, hydrogen bonding, and encapsulating moieties into established recognition motifs, calix[4]pyrrole in the present instance.     

Intramolecular interactions between chalcogen atoms: organoseleniums derived from 1-bromo-4-tert-butyl-2,6-di(formyl)benzene

[structure: see text] The synthesis and characterization of a series of low-valent organoselenium compounds derived from 1-bromo-4-tert-butyl-2,6-di(formyl)benzene (22) is described. The synthesis of diselenide 25 was achieved by the lithiation route whereas bis(4-tert-butyl-2,6-di(formyl)phenyl) diselenide (26) was synthesized by treating 22 with disodium diselenide. A series of monoselenides (27, 28, and 29) was obtained by facile nucleophilic substitution of bromine in 22, using the corresponding selenolates as nucleophiles. The halogenation reactions of bis(4-tert-butyl-2,6-di(formyl)phenyl) diselenide (26) did not afford the corresponding selenenyl halides but resulted in the isolation of an unexpected cyclic selenenate ester 34 as a product. The selenide 32 was synthesized by the treatment of dimethoxymethyl diselenide with trilithiated 2-bromo-5-tert-butyl-N,N'-di(phenyl)isophthalamide. The existence of potential Se...O intramolecular nonbonding interactions was examined by IR, (1)H, and (77)Se NMR spectroscopy, X-ray crystallography, and computational studies. The X-ray crystal structures of 26 and 27, having two ortho formyl groups, reveal the absence of any Se...O interactions. However, the Se...O interactions were observed in the selenenate ester 34 where one of the formyl groups has been utilized for the selenenate ring formation. The crystal structures of 26 and 27 exhibited intermolecular short-range C-H...Se interactions (hydrogen bonding). Although there are four heteroatoms in carbamoyl moieties ortho to selenium capable of forming a five-membered ring on intramolecular coordination, no such intramolecular Se...X (X = N, O) interaction was observed in the crystal structure of 32. The density functional theory calculations at the B3LYP/6-31G* level predicted that for all the diformyl systems (47a-c, 48a-c), the anti,anti conformer (when both formyl oxygen atoms point away from the selenium) is more stable. This preference was found to be reversed in the monoformyl-substituted systems (50a,b, 51a,b), where the syn conformer (when formyl oxygen is near the selenium) is energetically more favorable than the anti conformer.     

Polymerization of acrylonitrile. Kinetics of the reaction initiated by the Ce(IV)/thioacetamide redox system

Vinyl polymerization of acrylonitrile initiated by the Ce(IV)/thioacetamide redox system has been investigated in aqueous sulfuric acid in the temperature range of 10–20°C. The rate of polymerization (R_p) and the rate of Ce(IV) disappearance (?R_Ce) were measured. The effect of certain water-soluble organic solvents, added electrolytes, and aromatic and heterocyclic organic nitrogen compounds on the rate of polymerization has been investigated. Depending on the experimental results, we have suggested a suitable reaction scheme for the system which involves the production of initiating radicals from the oxidation of thioacetamide (TAm) by ceric ion and the termination of the polymer chain by metal ions.