Determination of polycyclic aromatic hydrocarbons in honey by matrix solid-phase dispersion and gas chromatography/mass spectrometry

A multiresidue method was developed for the de termination of 16 polycyclic aromatic hydrocarbons (PAHs) in unifloral and multifloral honeys. The analytical procedure is based on the matrix solid-phase dispersion of honey on a mixture of Florisil and anhydrous sodium sulfate in small glass columns and extraction with hexane-ethyl acetate (90 + 10, v/v) with assisted sonication. The PAH residues are determined by gas chromatography with mass spectrometric detection using selected-ion monitoring. Average recoveries for all the PAHs studied were in the range of almost 80 to 101%, with relative standard deviations of 6 to 15%. The limits of detection ranged from 0.04 to 2.9 microg/kg. The simultaneous extraction and cleanup of samples makes this method simple and rapid, with low consumption of organic solvents     

Synthesis of fluorinated drimanes. Preparation of 9αF-drimenin

A stereoselective approach to the 9α-fluorinated analogue of the natural drimane sesquiterpene drimenin starting from β-ionone is described. β-Ionone is transformed into a bicyclic β-cetoester from which 9αF-drimenin is prepared through stereoselective electrophilic fluorination at the C-9 with N-fluorobenzenesulfonimide followed by Wittig methylenation, allylic bromination, bromine-hydroxyl exchange and γ-lactonization.     

Synthesis, structures and comparative electrochemical study of 2,5-bis(trimethylsilylethynyl)thiophene coordinated cobalt carbonyl units

The reaction between 2,5-bis(trimethylsilylethynyl)thiophene and Co₂(CO)₈ or Co₂(CO)₆(X), (X = dppa, dppm), gave rise to the formation of substituted ethynylcobalt complexes containing one or two Co₂(CO)₆ or Co₂(CO)₄(X) units, 2-[Co₂(CO)₄(X){μ₂-η²-(SiMe₃)C₂}]-5-(Me₃SiCC)C₄H₂S (X = 2CO (1), dppa (3) or dppm (4)) and 2,5-[Co₂(CO)₄(X){μ₂-η²-SiMe₃C₂}]₂C₄H₂S (X = 2CO (2), dppa (5) or dppm (6)). Desilylation of the non-metallated and metallated alkynes in 3, 4 and 6 occurred on treatment with KOH and tetrabutylammonium fluoride to give 2-[Co₂(CO)₄(μ-X){μ₂-η²-SiMe₃C₂}]-5-(CCH)C₄H₂S (X = dppa (7), dppm (8)) and 2,5-[Co₂(CO)₄(μ-dppm){μ₂-η²-HC₂}]₂C₄H₂S (9), respectively. Crystals of 6 suitable for single-crystal X-ray diffraction were grown and the molecular structure of this compound is discussed. A comparative electrochemical study of all these complexes is presented by means of the cyclic and square-wave voltammetry techniques.     

Pentafluorophenyl imidato palladium(II) complexes: catalysts for Suzuki cross-coupling reactions

Novel N-bonded imidato complexes of general formula [Pd(N-N)(C6F5)(imidate)](imidate = maleimidate, succinimidate or phthalimidate; N-N = 2,2'-bipyridine (bipy), 4,4'-dimethyl-2,2'-bipyridine (Me2bipy) or N,N,N',N'-tetramethylethylenediamine (tmeda)), [NBu4][Pd(C6F5)(H2O)(succinimidate)2] and [NBu4][Pd(C6F5)(L)(succinimidate)2](L = PPh3 or t-BuNC) have been synthesised. These complexes are air-, light- and moisture-stable. The crystal structures of [Pd(tmeda)(C6F5)(maleimidate)].H2O.0.5CHCl3, [NBu4][Pd(C6F5)(H2O)(succinimidate)2].H2O and [NBu4][Pd(C6F5)(t-BuNC)(succinimidate)2].2H2O have been determined by X-ray diffraction. Many of these new complexes are shown to be active phosphine-free palladium catalysts/precatalysts for the Suzuki cross-coupling reactions of aryl bromides and aryl chlorides with phenylboronic acid.     

Synthesis and Characterization of Monomeric Aryloxo Palladium Complexes of the Type [Pd(N–N)(OAr)(C6F5)]. Crystal Structure of [Pd(tmeda)(C6F5)(OC6H4NO2‐p)]

Mononuclear palladium‐hydroxo complexes of the type [Pd(N–N)(C₆F₅)(OH)][(N–N) = 2,2′‐bipyridine (bipy), 4,4′‐dimethyl‐2,2′‐bipyridine (Me₂bipy), 1,10‐phenantroline (phen) or N,N,N′,N′‐tetramethylethylenediamine (tmeda) react with phenols ArOH in tetrahydrofuran giving the corresponding aryloxo complexes [Pd(N–N)(C₆F₅)(OAr)]. Elemental analyses and spectroscopic (IR, ¹H and ¹⁹F) methods have been used to characterize the new complexes. The X‐ray crystal structure of [Pd(tmeda)(C₆F₅)(OC₆H₄NO₂‐p)] has been determined. In the crystal packing the planes defined by two C₆H₄ rings show a parallel orientation. There are also intermolecular C–H···F and C‐H···O hydrogen bonds.     

Diffusion coefficients of 2-fluoroanisole, 2-bromoanisole, allylbenzene and 1,3-divinylbenzene at infinite dilution in supercritical carbon dioxide

The Taylor–Aris chromatographic technique was employed for the determination of diffusion coefficients of 2-fluoroanisole, 2-bromoanisole, allylbenzene and 1,3-divinylbenzene at infinite dilution in supercritical carbon dioxide from 313.16 to 333.16 K and pressures between 15 and 35 MPa. As expected, the diffusivities rise when temperature increases and pressure decreases. Numerous predictive equations are compared with experimental data: Lai–Tan, Liu–Ruckenstein cluster formula, Woerlee, Hippler–Schubert–Troe, Catchpole–King, Eaton–Akgerman, He, He–Yu, Liu–Silva–Macedo, Funazukuri and coworkers, Dariva–Coelho–Oliveira, Zhu–Lu–Zhou–Wang–Shi and the Liu–Ruckenstein RHS formula. The equations of He, He–Yu and Catchpole–King are the best of all, but cannot be used in the whole range of temperatures and solvent densities.     

Selective determination of trimethylamine in air by liquid chromatography using solid phase extraction cartridges for sampling

The selective determination of trimethylamine (TMA) in air by liquid chromatography is reported. Sampling is effected by flushing air through C18-packed solid-phase extraction (SPE) cartridges at a flow rate of 15 mL/min for 15 min. Next, TMA is desorbed from the cartridges and injected into the chromatographic system. The analyte is then selectively retained on a precolumn (20 mm x 2.1 mm i.d., packed with 30 microm, Hypersil C18 phase), and derivatized on-line by injecting 9-fluorenylmethyl chloroformate (FMOC). Finally, the TMA-FMOC derivative is transferred to the analytical column (125 mm x 4 mm i.d., LiChrospher 100 RP18, 5 microm), and monitored at 262 nm. The method was applied to the measurement of TMA in air in the 0.25-2.5 microg interval (equivalent to concentrations of TMA of 1.1-11 mg/m3), providing good linearity, reproducibility and accuracy. The mean recovery of TMA was (96 +/- 7%) (n = 12), and the limit of detection was 0.05 microg. The proposed procedure allows the selective determination of TMA in the presence of other primary and secondary short-chain aliphatic amines.     

Synthesis and Characterization of Sol-Gel Cu-ZrO2 and Fe-ZrO2 Catalysts

Fe-ZrO₂ and Cu-ZrO₂ xerogels were prepared by a sol-gel method. The effect of the hydrolysis catalyst during the gelation step, namely H₂SO₄ or NH₄OH, on the properties of the resulting materials was investigated by XRD, BET, TGA/DTA, TPD of ammonia, FTIR, and TPR. Fe-ZrO₂ and Cu-ZrO₂ xerogels, with sulfuric acid introduced as the hydrolysis catalyst, mainly crystallyzed in the tetragonal phase and exhibited larger surface area and acid amount than those obtained with NH₄OH. Ammonia TPD shows that copper promoted sulfated zirconia is the most acidic material. TGA and FTIR reveal that under oxidizing conditions sulfated zirconia promoted with iron and copper retains more sulfate species than unpromoted sulfated zirconia. Regardless of the hydrolysis catalyst employed, copper promoted catalysts calcined at 600°C, contain a large fraction of copper oxide specieseasily reduced at low temperatures. These copper oxide species are believed to have different environment and interactions with the surface oxygen vacancies of the zirconia support. A FeO-like phase appears to be the most probable one after reduction of Fe-ZrO₂ catalysts prepared with NH₄OH as the hydrolysis catalyst. The formation of Fe° species may be hindered by the high dispersion and interaction of Fe²⁺ ions with the zirconia support. On the other hand, the reduction peaks of iron oxide and sulfate species exhibit a considerable overlap in the TPR profiles of sulfated Fe-ZrO₂ samples. Hence, the nature of the supported phase in the latter samples is rather uncertain.     

Gas chromatography–triple-quadrupole mass spectrometry for analysis of selected polyhalogenated pollutants in plants. Comparison of extraction methods

Different extraction methods, followed by gas chromatography coupled to triple quadrupole mass spectrometry, were evaluated for simultaneous extraction of seven polychlorinated biphenyls (PCBs) and six polybrominated diphenyl ethers (PBDEs) from common weeds. Pressurized liquid extraction (PLE) with in-cell clean-up, ultrasound-assisted extraction (UAE) with in-column clean-up, and UAE with dispersive solid-phase extraction (dSPE) clean-up were evaluated and compared. In-cell clean-up with 4 g Florisil and 0.5 g graphitized carbon black (GCB) and two extraction cycles of 10 min with n-hexane–ethyl acetate 80:20 (v/v) at 60 °C were used for the PLE procedure. UAE with in-column clean-up was conducted under conditions similar to those reported for the PLE method whereas in UAE with dSPE clean-up purification of the extract was performed after extraction using primary and secondary amine sorbent (PSA) and GCB. Recovery from 82 to 104 % was obtained for all the compounds by PLE whereas, in general, lower extraction efficiency was obtained by UAE with in-column clean-up (especially for BDE-17 and BDE-183, for which recovery was 70 and 41 %, respectively) and by UAE with dSPE clean-up, for which the main drawback is that BDE-183 cannot be extracted. Finally, PLE was used for analysis of PCBs and PBDEs in different plants (Lolium rigidum, Lactuca serriola, Malva sylvestris, and Verbascum thapsus) collected from residential and/or rural areas of Madrid (Spain). Several of the analyzed compounds were detected at low levels in these plants, but only PCB-153 could be quantified.

Evaluation of the Storage Conditions and Type of Cork Stopper on the Quality of Bottled White Wines

The effects of different storage conditions, light exposure, temperature and different commercially available cork stoppers on the phenolic, volatile and sensorial profile of Verdejo wines were studied. Two natural corks of different visual quality and a microgranulated cork stopper were investigated over one year at two different storage conditions. One simulating light exposure and temperature in retail outlets and the other simulating optimal cellar conditions (darkness and 12 °C). The wines stored under commercial conditions showed greater losses of total and free SO₂ and higher levels of brown-yellowish tones, related to the oxidation of flavan-3-ols. Although these wines underwent a decrease in the total content of stilbenes, a significant increase in trans-piceid was observed. In addition, these wines suffered important changes in their volatile and sensory profile. Volatile compounds with fruity and floral aromas decreased significantly, while volatile compounds related to aged-type characters, as linalool oxides, vitispirane, TDN or furan derivatives increased. Wines stored in darkness at 12 °C underwent minor changes and their sensory profiles were similar to wine before bottling. The high-quality natural corks and microgranulated corks better preserved the quality of the white wines from a sensory point of view. These results showed that temperature and light exposure conditions (diffuse white LEDs and 24 ± 2 °C) in retail outlets considerably decrease the quality of bottled white wines and, consequently, their shelf life, due to the premature development of aged-type characters.