Dopant-free NiOx Nanocrystals: A Low-cost and Stable Hole Transport Material for Commercializing Perovskite Optoelectronics

Advancing inverted (p-i-n) perovskite solar cells (PSCs) is critical for commercial applications given their compatibility with different bottom cells for tandem photovoltaics, low-temperature processability (≤100 °C), and promising operational stability. Although inverted PSCs have achieved an efficiency of over 25 % using doped or expensive organic hole transport materials (HTMs), their synthesis cost and stability still cannot meet the requirements for their commercialization. Recently, dopant-free and low-cost non-stoichiometric nickel oxide nanocrystals (NiO_x NCs) have been extensively studied as a low-cost and effective HTM in perovskite optoelectronics. In this minireview, we summarize the synthesis and surface-functionalization methods of NiO_x NCs. Then, the applications of NiO_x NCs in other perovskite optoelectronics beyond photovoltaics are discussed. Finally, we provide a perspective for the future development of NiO_x NCs for the commercialization of perovskite optoelectronics.     

Two-phase flow distribution of air–water annular flow in a parallel flow heat exchanger

The air and water flow distribution are experimentally studied for a round header – flat tube geometry simulating a parallel flow heat exchanger. The number of branch flat tube is 30. The effects of tube outlet direction, tube protrusion depth as well as mass flux, and quality are investigated. The flow at the header inlet is identified as annular. For the downward flow configuration, the water flow distribution is significantly affected by the tube protrusion depth. For flush-mounted configuration, most of the water flows through frontal part of the header. As the protrusion depth increases, more water is forced to the rear part of the header. The effect of mass flux or quality is qualitatively the same as that of the protrusion depth. Increase of the mass flux or quality forces the water to rear part of the header. For the upward flow configuration, however, most of the water flows through rear part of the header. The protrusion depth, mass flux, or quality does not significantly alter the flow pattern. Possible explanations are provided based on the flow visualization results. Negligible difference on the water flow distribution was observed between the parallel and the reverse flow configuration.     

Polypyridyl-Based Copper Phenanthrene Complexes: Combining Stability with Enhanced DNA Recognition

We report a series of copper(II) artificial metallo-nucleases (AMNs) and demonstrate their DNA damaging properties and in-vitro cytotoxicity against human-derived pancreatic cancer cells. The compounds combine a tris-chelating polypyridyl ligand, di-(2-pycolyl)amine (DPA), and a DNA intercalating phenanthrene unit. Their general formula is Cu-DPA-N,N' (where N,N'=1,10-phenanthroline (Phen), dipyridoquinoxaline (DPQ) or dipyridophenazine (DPPZ)). Characterisation was achieved by X-ray crystallography and continuous-wave EPR (cw-EPR), hyperfine sublevel correlation (HYSCORE) and Davies electron-nuclear double resonance (ENDOR) spectroscopies. The presence of the DPA ligand enhances solution stability and facilitates enhanced DNA recognition with apparent binding constants (K_app) rising from 10⁵ to 10⁷ m ⁻¹ with increasing extent of planar phenanthrene. Cu-DPA-DPPZ, the complex with greatest DNA binding and intercalation effects, recognises the minor groove of guanine–cytosine (G-C) rich sequences. Oxidative DNA damage also occurs in the minor groove and can be inhibited by superoxide and hydroxyl radical trapping agents. The complexes, particularly Cu-DPA-DPPZ, display promising anticancer activity against human pancreatic tumour cells with in-vitro results surpassing the clinical platinum(II) drug oxaliplatin.     

Switchable Q-switched and laser operating mode-locked erbium-doped fiber in the L-band region

We demonstrate a switchable Q-switched and mode-locked erbium-doped fiber laser （EDFL） operating in the L-band region using the nonlinear polarization rotation effect. The switching operation is achieved by controlling intensity-dependent loss using a polarization controller. In Q-switching mode, the EDFL produces a pulse train with a repetition rate of 21.1 kHz, pulse width of 7.7 #s, and pulse energy of 13.6 nJ. The EDFL also generates a multi-wavelength comb with a very narrow and constant wavelength spacing of 0.045 nm and optical signal-to-noise ratio of at least l0 dB. During mode locking, the EDFL produces stretched pulses with 3-dB bandwidth of 26.2 nm, pulse width of 350 fs, repetition rate of 2.38 MHz, and pulse energy of 48.56 pJ.     

Hopping transport in molecularly doped polymers: Joint modelling of positional and energetic disorder

Hole transport in molecularly doped polymers (MDPs) is modelled as random walks in a bias field E over organic donors D embedded in a polymer matrix. Positional disorder for donor fraction p < 1 is represented by randomly placing donors at sites in a fcc lattice, while energetic disorder is given by a Gaussian distribution of site energies with width and spatial correlations in a sphere of radius R c . Random walks generated by Marcus or small polaron rates for steps between nearby donors yield the mobility w( E , T ). In addition to and R c , the rates depend on the parameters nand ufor the distance dependence and reorganization energy respectively. With tritolylamine (TTA) in polystyrene as the paradigm, a procedure is presented for fixing the interdependent parameters , u, nand R c that reproduce the field and temperature dependences of w( E , T ) over a wide range of p that includes dilute systems with different TTA packings enforced by saturated bonds. Positional disorder exceeds energetic disorder in dilute systems and yields constant w( E , T 0 ) near room temperature. Joint modelling of TTA and related systems accounts for the characteristic w( E , T ) of MDPs and substantially extends the picture of hopping between localized states, with nincreased by about 15% and reduced by about 25% from conventional analysis using the Gaussian disorder model. Similar parameter changes are expected in other MDPs based on the compensation temperature T 0 and on scaling TTA results.     

Bruceines K and L from the Ripe Fruits of Brucea javanica

Bruceine K ( 1 ), a pentacyclic C₂₀‐quassinoid bearing a unique 12,20‐epoxy moiety, and bruceine L ( 2 ), along with the ten known compounds (6S,7E)‐6,9,10‐trihydroxy‐ and (6S,7E)‐6,9‐dihydroxymegastigma‐4,7‐dien‐3‐one ( 3 and 4 , resp.), cleomiscosins A–C, luteoline, quercetine, bruceantinol, pinoresinol, and thevetiaflavone, were isolated from the ripe fruits of Brucea javanica. Bruceines K ( 1 ) and L ( 2 ) were determined to be (1β,2α,11β,12β,14ξ,15β)‐12,20‐epoxy‐1,2,11,13,14,15‐hexahydroxypicras‐3‐en‐16‐one and (1β,2α,11β,12β,15β)‐13,20‐epoxy‐1,2,11,12‐tetrahydroxy‐16‐oxo‐15‐(senecioyloxy)picras‐3‐en‐21‐oic acid methyl ester (senecioic acid=3‐methylbut‐2‐enoic acid), respectively, on the basis of NMR (¹H‐ and ¹³C‐NMR, DEPT, ¹H,¹H‐COSY, NOESY, HMQC, and HMBC) and ESI‐MS data. Among the known compounds, (6S,7E)‐6,9,10‐trihydroxy‐ and (6S,7E)‐6,9‐dihydroxymegastigma‐4,7‐dien‐3‐one ( 3 and 4 , resp.), cleomiscosin C, luteoline, quercetine, and thevetiaflavone were isolated for the first time from the Brucea plants.     

Organo‐ and Hydrogelators Based on Luminescent Monocationic Terpyridyl Platinum(II) Complexes with Biphenylacetylide Ligands

A series of phosphorescent terpyridyl platinum(II) complexes with ancillary biphenylacetylide ligands, namely, [(R₃tpy)PtC≡C(biphenyl)]X (R=tBu, H, or Et₂N; tpy=2,2′;6′,2′′‐terpyridyl; X is an anion) were synthesized and structurally characterized by various spectroscopic techniques and X‐ray diffraction methods. Despite a lack of long alkyl chain(s) or hydrogen‐bonding motif(s), complexes [(tpy)PtC≡C(biphenyl)]Cl and [(tBu₃tpy)PtC≡C(biphenyl)]X (X=Cl, ClO₄, PF₆, or BF₄) were found to gelate water and organic solvents, respectively. The self‐aggregation of these complexes in solutions and the resulting gels were investigated with variable‐temperature (VT) ¹H NMR spectroscopy, polarized optical microscopy, and absorption/emission spectroscopy. SEM micrographs on dry gels revealed entangled nanofibers with diameters of 20–40 nm and lengths of tens of micrometers. Powder X‐ray diffraction (PXRD) study revealed various degrees of crystallinity of these fibrillar nanostructures. The substituents on both the terpyridyl and acetylide ligands and counterion of these complexes play a profound but concerted role in tuning the intermolecular metal???metal and/or π–π interactions, and hence the gelation properties.