The Aqueous Ca2+ System,in Comparison with Zn2+, Fe3 +, and Al3 +: An Ab Initio Molecular Dynamics Study

Herein, we report on the structure and dynamics of the aqueous Ca²⁺ system studied by using ab initio molecular dynamics (AIMD) simulations. Our detailed study revealed the formation of well‐formed hydration shells with characteristics that were significantly different to those of bulk water. To facilitate a robust comparison with state‐of‐the‐art X‐ray absorption fine structure (XAFS) data, we employ a 1st principles MD‐XAFS procedure and directly compare simulated and experimental XAFS spectra. A comparison of the data for the aqueous Ca²⁺ system with those of the recently reported Zn²⁺, Fe³⁺, and Al³⁺ species showed that many of their structural characteristics correlated well with charge density on the cation. Some very important exceptions were found, which indicated a strong sensitivity of the solvent structure towards the cation′s valence electronic structure. Average dipole moments for the 2nd shell of all cations were suppressed relative to bulk water.     

Optical transitions in single-wall boron nitride nanotubes

Optical transitions in single-wall boron nitride nanotubes are investigated by means of optical absorption spectroscopy. Three absorption lines are observed. Two of them (at 4.45 and 5.5 eV) result from the quantification involved by the rolling up of the hexagonal boron nitride (h-BN) sheet. The nature of these lines is discussed, and two interpretations are proposed. A comparison with single-wall carbon nanotubes leads one to interpret these lines as transitions between pairs of van Hove singularities in the one-dimensional density of states of boron nitride single-wall nanotubes. But the confinement energy due to the rolling up of the h-BN sheet cannot explain a gap width of the boron nitride nanotubes below the h-BN gap. The low energy line is then attributed to the existence of a Frenkel exciton with a binding energy in the 1 eV range.     

Controlled assembly of bacteria on chemical patterns using soft lithography

Highly ordered arrays of single living bacteria were obtained by selective adsorption of bacteria onto chemical patterns with micrometric resolution. The chemically engineered template surfaces were prepared with the combination of microcontact printing process and a simple incubation technique. This methodology can be used for fundamental studies of bacterium's inner mechanisms and sub-cellular organization as well as for interfacing living bacteria with artificial microsystems.     

Poly[2-(methacryloyloxy)ethylphosphorylcholine]-coated iron oxide nanoparticles: synthesis, colloidal stability and evaluation for stem cell labelling

Poly[2-(methacryloyloxy)ethylphosphorylcholine]-coated SPIONs were prepared through ATRP and amidation coupling reactions. The coated SPIONs exhibited high stability and re-dispersability in phosphate buffered saline and uptake in a stem cell line, with high T(2) relaxivity.     

Cellulose nanofibers from white and naturally colored cotton fibers

Suspensions of white and colored nanofibers were obtained by the acid hydrolysis of white and naturally colored cotton fibers. Possible differences among them in morphology and other characteristics were investigated. The original fibers were subjected to chemical analysis (cellulose, lignin and hemicellulose content), X-ray diffraction (XRD) analysis, and scanning electron microscopy (SEM). The nanofibers were analyzed with respect to yield, elemental composition (to assess the presence of sulfur), zeta potential, morphology (by scanning transmission electron microscopy (STEM)) and atomic force microscopy (AFM), crystallinity (XRD) and thermal stability by thermogravimetric analysis in air under dynamic and isothermal temperature conditions. Morphological study of several cotton nanofibers showed a length of 85–225 nm and diameter of 6–18 nm. The micrographs also indicated that there were no significant morphological differences among the nanostructures from different cotton fibers. The main differences found were the slightly higher yield, sulfonation effectiveness and thermal stability under dynamic temperature conditions of the white nanofiber. On the other hand, in isothermal conditions at 180 °C, the colored nanofibers showed a better thermal stability than the white.     

Evaluation of Isoprene Chain Extension from PEO Macromolecular Chain Transfer Agents for the Preparation of Dual, Invertible Block Copolymer Nanoassemblies

Two RAFT-capable PEO macro-CTAs, 2 and 5 kDa, were prepared and used for the polymerization of isoprene which yielded well-defined block copolymers of varied lengths and compositions. GPC analysis of the PEO macro-CTAs and block copolymers showed remaining unreacted PEO macro-CTA. Mathematical deconvolution of the GPC chromatograms allowed for the estimation of the blocking efficiency, about 50% for the 5 kDa PEO macro-CTA and 64% for the 2 kDa CTA. Self assembly of the block copolymers in both water and decane was investigated and the resulting regular and inverse assemblies, respectively, were analyzed with DLS, AFM, and TEM to ascertain their dimensions and properties. Assembly of PEO-b-PIp block copolymers in aqueous solution resulted in well-defined micelles of varying sizes while the assembly in hydrophobic, organic solvent resulted in the formation of different morphologies including large aggregates and well-defined cylindrical and spherical structures.     

From atoms to biomolecules: a fruitful perspective

We present a summary of the research activities of the “Quantum Chemistry and Atomic Physics” theoretical group of the “Chimie Quantique et Photophysique” Laboratory at Université Libre de Bruxelles. We emphasize the links between the three orientations of the group: theoretical atomic spectroscopy, structure, and molecular dynamics and list the perspectives of our collaboration.     

Surface deposition and coagulation efficiency of combustion generated nanoparticles in the size range from 1 to 10 nm

The size distribution of the nanoparticles formed in premixed ethylene–air flames and collected thermophoretically on mica cleaved substrates is obtained by atomic force microscopy (AFM). The distribution function extends from 1 to about 5 nm in non-sooting flames and in the soot pre-inception region of the richer flames, while it becomes bimodal and larger particles are formed in the soot inception region of the slightly sooting flames. The distribution is compared with the size distribution of nano-sized organic carbon (NOC) and soot particles, obtained by “in situ” multi-wavelength extinction and light scattering methods. The deposition efficiency is estimated from the differences between these two size distribution functions as a function of the equivalent diameter of the nanoparticles. Furthermore, the coagulation coefficient of particles in flame is obtained from the temporal evolution of the number concentration of the nanoparticles inside the flames. NOC particles, which are rapidly produced in locally rich combustion regions, have peculiar properties since their sticking coefficient both for coagulation and adhesion result to be orders of magnitudes lower than that expected by larger aerosols, like soot particles. The experimental results are interpreted by modelling the van der Waals interactions of the nanoparticles in terms of Lennard-Jones potentials and in the framework of the gas kinetic theory. The estimated adhesion and coagulation efficiencies are in good agreement with those calculated from AFM and optical data. The very low efficiency values observed for the smaller particles could be ascribed to the high energy of these particles due to their Brownian motion, which causes thermal rebound effects prevailing over adhesion mechanisms due to van der Waals forces.     

Reduction of iodine by hydroxylamine within the pH range 0.7–3.5

The reduction of iodine by hydroxylamine within the [H⁺] range 3×10⁻¹–3×10⁻⁴ mol.L⁻¹ was first studied until completion of the reaction. In most cases, the concentration of iodine decreased monotonically. However, within a narrow range of reagent concentrations ([NH₃OH⁺]₀/[I₂]₀ ratio below 15, [H⁺] around 0.1 mol.L⁻¹, and ionic strength around 0.1 mol.L⁻¹), the [I₂] and [I₃⁻] vs. time curves showed 2 and 3 extrema, respectively. This peculiar phenomenon is discussed using a 4 reaction scheme (I₂+I⁻⇔︁I₃⁻, 2 I₂+NH₃OH⁺+H₂O→HNO₂+4 I⁻+5 H⁺, NH₃OH⁺+HNO₂→N₂O+2 H₂O+H⁺, and 2 HNO₂+2 I⁻+2 H⁺→2 NO+I₂+2 H₂O). In a flow reactor, sustained oscillations in redox potential were recorded with an extremely long period (around 24 h). The kinetics of the reaction was then investigated in the starting conditions. The proposed rate equation points out a reinforcement of the inhibition by hydrogen ions when [H⁺] is above 4×10⁻² mol.L⁻¹ at 25°C. A mechanism based on ion-transfer reactions is postulated. It involves both NH₂OH and NH₃OH⁺ as the reducing reactive species. The additional rate suppression by H⁺ at low pH would be connected to the existence of H₂OI⁺ in the reactive medium. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 785–797, 1998     

Kinetic investigation of the RAFT polymerization of p‐acetoxystyrene

The kinetics of the RAFT polymerization of p‐acetoxystyrene using a trithiocarbonate chain transfer agent, S‐1‐dodecyl‐S′‐(α,α′‐dimethyl‐α″‐acetic acid)trithiocarbonate, DDMAT, was investigated. Parameters including temperature, percentage initiator, concentration, monomer‐to‐chain transfer agent ratio, and solvent were varied and their impact on the rate of polymerization and quality of the final polymer examined. Linear kinetic plots, linear increase of M_n with monomer conversion, and low final molecular weight dispersities were used as criteria for the selection of optimized polymerization conditions, which included a temperature of 70 or 80 °C with 10 mol % AIBN initiator in bulk for low conversions or in 1,4‐dioxane at a monomer‐to‐solvent volume ratio of 1:1 for higher conversions This study opens the way for the use of DDMAT as a chain transfer agent for RAFT polymerization to incorporate p‐acetoxystyrene together with other functional monomers into well‐defined copolymers, block copolymers, and nanostructures. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2517–2524, 2010