Proteins Entrapped in Silica Monoliths Prepared from Glyceroxysilanes

The preparation of discrete polyol based silane precursors derived from glycerol by a simple one-pot process is described. These polyol-based silanes could be hydrolyzed under mild pH conditions and upon gelation resulted in the formation of optically clear, monolithic, mesoporous silica. The hydrolysis and condensation reactions lead to cure rates that are very sensitive to ionic strength, but are almost unaffected by pH in contrast to those of alkoxysilanes derived from primary alcohols such as Si(OEt)₄. Residual glycerol in the silica monolith could be removed by washing, or could be left in the silica to reduce the magnitude of shrinkage during long term storage. The biocompatible glyceroxysilane precursors lead to materials that were able to retain the activity of entrapped enzymes over repeated cycles of use for periods of up to several months.     

Monte Carlo determinations of the beta dose rate to tooth enamel

The results of Monte Carlo simulations of the beta dose rate to enamel are presented. The dose rates are the most comprehensive to date, incorporating the beta spectrum from 21 different radionuclides, all internal conversion and Auger electrons, the majority of the bremsstrahlung radiation, effects due to radon loss in the uranium series, and variations in the moisture content of the sediment. Applications to a new dating technique in archaeology using electron spin resonance and beta-gradient isochrons are discussed.     

The electron ionization rate in multilayered semiconductor structures

We present theoretical results of the electron impact ionization rate in GaAs/AlGaAs multiquantum well structures as a function of applied electric field for various geometries, i.e., well and barrier widths. In addition, we present preliminary measurements of the current-voltage characteristics of MBE grown devices which demonstrate very low leakage current as well as sharp breakdwon behavior. It is found that the net ionization rate, determined by averaging over the constitutent GaAs and AlGaAs layers, approaches the weighted average of the constituent bulk rates at high electric field strengths; the potential discontinuity is relatively unimportant. The electron ionization rate within the well regions alone is still higher than that in bulk GaAs, but is insufficiently enhanced to compensate for the much lower rate in the AlGaAs layers. As the field is lowered to 250.0 kV/cm, the average ionization rate in the multiquantum well structure becomes larger than in the bulk.     

On the design of broadband quasioptical systems for submillimeter-wave radio-astronomy receivers

In this paper, we summarize the issues that should be considered when designing broadband quasioptical systems for submillimetre-wave radioastronomy receivers. We cover topics such as bandwidth, cross-talk, truncation, and aberrations, and we argue that it should be possible to manufacture high-efficiency systems that have several octaves of bandwidth. A key feature of the paper is that we use the language of multimode Gaussian optics throughout, and in this way, we emphasize that a receiver is a diffraction-limited imaging system rather than just a collection of components for guiding Gaussian beams. The whole discussion is conducted in terms of a particular system we are constructing for the James Clerk Maxwell Telescope in Hawaii.     

Plant processing by simultaneous lactic acid fermentation and enzyme hydrolysis

Traditional ensiling of plant material by anaerobic lactic acid fermentation was combined with enzymatic hydrolysis (ENLAC for short) with cell wall degrading enzymes (hemicellulases, cellulases, and pectinases) to increase fiber digestibility or to increase the recovery of cell content from plants. Such findings were made using 0.015% (w/w, wet basis) Phylacell® enzyme preparation by ENLAC of corn and corn-sorghum mixtures, but not of forage grasses. Addition to alfalfa of a mixture of cell wall degrading enzymes, such as NOVO Viscozyme® together with NOVO Celluclast® each at 0.2–1.0% (w/w, wet basis), resulted in more rapid ensiling and improvement of rumen digestibility of silage by 20%. After 20 d of ensiling at 25 °C when the same enzymes were added to alfalfa at the 1.0% level, protein recovery by pressing increased by 35%, β-carotene recovery by 80%, and chlorophyll/xanthophyll recovery by 30%. ENLAC with the same enzymes also increased the recovery of sclareol from muscatel sage by 400%.

     

Global and local optimization using radial basis function response surface models

The focus of this paper is the optimization of complex multi-parameter systems. We consider systems in which the objective function is not known explicitly, and can only be evaluated through computationally intensive numerical simulation or through costly physical experiments. The objective function may also contain many local extrema which may be of interest. Given objective function values at a scattered set of parameter values, we develop a response surface model that can dramatically reduce the required computation time for parameter optimization runs. The response surface model is developed using radial basis functions, producing a model whose objective function values match those of the original system at all sampled data points. Interpolation to any other point is easily accomplished and generates a model which represents the system over the entire parameter space. This paper presents the details of the use of radial basis functions to transform scattered data points, obtained from a complex continuum mechanics simulation of explosive materials, into a response surface model of a function over the given parameter space. Response surface methodology and radial basis functions are discussed in general and are applied to a global optimization problem for an explosive oil well penetrator.     

Peptide labeling using 188Re, 188Re-MAG3 and 153Sm-H1ETA: A comparison on their in vitro lipophilicity

Lanreotide peptide was labeled with ¹⁵³Sm-H₁ETA and ¹⁸⁸Re-MAG₃ in order to evaluate whether or not their conjugation to the peptide produce significant differences of the in vitro lipophilicity with respect to the ¹⁸⁸Re-lanreotide prepared by the direct labeling method (highly lipophilic). The differences of lipophilicity between the complexes, were evaluated using a reverse phase HPLC system. The measured lipophilicity of ¹⁵³Sm-H₁ETA-lanreotide, ¹⁸⁸Re-MAG₃-lanreotide and ¹⁸⁸Re-lanreotide was taken to be the capacity factor [k" = (t _R-t ₀)/t ₀ where t _R is the retention time and t ₀ is the dead time] for each of the complexes under identical chromatography conditions. Results showed that the in vitro lipophilicity decreased in the order ¹⁸⁸Re-lanreotide (direct labeling), ¹⁸⁸Re-MAG₃-lanreotide and ¹⁵³Sm-H₁ETA-lanreotide. Since the last one has a capacity factor (k") similar to that of ¹⁸⁸Re-MAG₃, some renal elimination for ¹⁵³Sm-H₁ETA-lanreotide could be expected, which probably would reduce the unnecessary radiation dose to normal tissues.