Serial magnetic resonance imaging in patients following acute myocardial infarction.

The detection of serial changes in magnetic resonance (MR) signal intensity of the heart following acute myocardial infarction may provide a useful method of characterizing tissue healing. Fourteen patients with acute Q-wave infarction underwent T2-weighted, spin-echo cardiac imaging during hospitalization, followed by one or more additional MR studies (total 31) over a 6- to 27-wk period (mean: 3 mo). Visual assessment of the images demonstrated a gradual reduction in signal intensity and localization of the bright signal to the subendocardium of the infarction region over the three-mo study period. A quantitative measurement of signal intensity (infarction/normal myocardium) fell from 1.81 +/- 0.42 on the initial study to 1.34 +/- 0.37 (p less than 0.05) at a mean of 14 wk. Two patients had an increase in signal intensity on the follow-up study and both patients had been readmitted with acute coronary syndromes. In summary, characterization of changes in signal intensity may provide a useful method of assessing myocardial healing following acute myocardial infarction. Further studies are indicated to determine the prognostic significance of these parameters.     

广义风险过程中渐近方差的非参数估计

本文对广义风险过程中的渐近方差作了非参数估计,得出并证明了两个定理,为广义风险过程中破产概率的区间估计作了理论准备．     

3,3,6,6-四甲基-9-邻氯苯基-1,8-二氧代-3,4,5,6,7,9-六氧化氧杂蒽的合成和晶体结构

标题化合物C23H25对O3Cl是由邻氯苯甲醛与5，5-二甲基1，3-环己二酮在N，N-二甲基甲酸腹中反应而得。结构通过单晶X-射线衍射法确定，其晶体属于单科晶系，空间群=1632。晶体结构用直接法解出，使用全矩阵最小二乘法对原子参数进行修正，最后的偏离因子为R=0．054，Rw一0．063。在晶体结构中，吡喃环与苯环之间的两面角为92．43°。     

Total Synthesis of Several 8, 8",-Biflavones

8,8"-Biflavonoidsareantw0rtantclass0fbiflavonoids.Asasystematicresearchofthe8,8"-biflav0noids,wehavepreviouslyreportedthestudyonthereactionof2'-hydroxychaloneswithl2-H2SO4-DMSOsystem.'InthispaPer,thesynthesisof5,5",7,7',-tetTameth0xy-8,8"-biflavonela2,4,4",7,7"-tetramethoxy-8,8"-biflavone1b',4',4",,5,5,',7,7"-hexamethoxy-8,8"-biflav0ne1c4and4,4"-dibenZyl0xy-5,5",7,7"-tetramothoxy-8,8"-biflavoneldisreported.ThesyntheticmethodisshownintheSchemebelow.2-Hydroxyacet0phenonescondensedwithsubsti…     

Multiphoton ionization vibrational state selection of H2O, D2O and HDO

We present a study of single color (2 + 1) resonance-enhanced multiphoton ionization (REMPI) of H₂O, D₂O, and HDO via several Rydberg states lying in the energy range from 80 000 to 86 000 cm⁻¹. Photoelectron spectra (PES) show that the corresponding cations can be vibrationally state-selected for most vibrational states. The exception is the bend of H₂O⁺ and HDO⁺, where mixing in the REMPI intermediate level results in weak ion intensity and only 50% state purity.     

Contact angle hysteresis, adhesion, and marine biofouling

Adhesive and marine biofouling release properties of coatings containing surface-oriented perfluoroalkyl groups were investigated. These coatings were prepared by cross-linking a copolymer of 1H,1H,2H,2H-heptadecafluorodecyl acrylate and acrylic acid with a copolymer of poly(2-isopropenyl-2-oxazoline) and methyl methacrylate at different molar ratios. The relationships between contact angle, contact angle hysteresis, adhesion, and marine biofouling were studied. Adhesion was determined by peel tests using pressure-sensitive adhesives. The chemical nature of the surfaces was studied by using X-ray photoelectron spectroscopy. Resistance to marine biofouling of an optimized coating was studied by immersion in seawater and compared to previous, less optimized coatings. The adhesive release properties of the coatings did not correlate well with the surface energies of the coatings estimated from the static and advancing contact angles nor with the amount of fluorine present on the surface. The adhesive properties of the surfaces, however, show a correlation with water receding contact angles and contact angle hysteresis (or wetting hysteresis) resulting from surface penetration and surface reconstruction. Coatings having the best release properties had both the highest cross-link density and the lowest contact angle hysteresis. An optimized coating exhibited unprecedented resistance to marine biofouling. Water contact angle hysteresis appears to correlate with marine biofouling resistance.     

Controlled shrinkage polymers: Characterization of epoxy resins cured with spirobislactones

The diglycidyl ether of bisphenol A (DGEBA) was cured with either an aliphatic or an aromatic spirobislactone using a tertiary amine catalyst. The products were characterized by FTIR, TGA, DSC, dilatometry, and single-fiber adhesion measurements, and their performance was compared to that of DGEBA cured with acid anhydrides. Both aliphatic and aromatic bislactones are effective curing agents for DGEBA. FTIR and dilatometry confirm that both lactone rings open early in the curing reaction and initially offset shrinkage caused by polymerization. After the bislactone has been consumed, oxirane reactions proceed in a normal fashion. The final shrinkage of cured DGEBA polymers, with or without addition of bislactones, is 3.0–3.5%. Bislactone-modified materials possess superior thermal properties, when compared to those of anhydride-cured materials.     

高效液相色谱氮杂冠醚键合固定相的合成及性能研究

我们曾用γ－氯丙基键合硅胶（ＣＰＳ），在氢化钠（ＮａＨ）作用下合成了３－（氮杂－１８－冠－６）丙基键合固定相（ＢＣＰ）［１］．该固定相对碱基、核苷酸、硝基苯酚等有较好的分离选择性，但由于ＮａＨ对硅胶基质腐蚀作用较大，导致ＢＣＰ柱效及渗透性较低．本文采...