Development of an autoclave curing system for fibre reinforced polymer composites

An autoclave curing system has been developed and fabricated which is capable of curing both flat and contoured fibre reinforced polymer composite components. The system can operate at up to 20 bar pressure whilst achieving a 0·1-bar vacuum within the lay-up film bagging. Cure temperatures of up to 180°C were achieved using a stepwise temperature controlling system, which enabled the dwell temperature to be maintained within a ±1 °C tolerance.     

Spectral and scattering theory for a Schrödinger operator with a class of momentum-dependent long-range potentials

Let be the selfadjoint operator for the static electromagnetic field where W _j for 0, 1, 2, ..., n is a sum of (i) a short-range potential and (ii) a smooth long-range potential decreasing at as |x|^- with in (0, 1]. Then for >1/2, asymptotic completeness holds for the scattering system (H, H ₀).     

Polymer crystallinity and its effect on the non-linear bending creep rate for a polyphenylene sulphide thermoplastic composite

Recent developments have led to the introduction of advanced thermoplastic composites such as Polyphenylene Sulphide (PPS), which can be used structurally at higher temperatures. Because of its thermoplastic nature, it can also be hot worked by bringing the working temperature considerably above the glass transition temperature. However, such annealing processes also affect its degree of crystallinity, which in turn affect the properties of the material. This paper reports on the effect of matrix crystallinity on the rate of creep deformation in three point bending of some reinforced PPS composites. This work was based on a non-linear approach based on a Power law creep model creep deformation analysis. The effect of annealing on the non-linear creep deformation of the PPS composite specimens has been analysed using a Power Law creep model. Results indicate that the creep deformation for both 20 and 40% reinforced samples were relatively similar despite the difference in the amount of fibre reinforcement. In contrast, the value of the creep component decreased exponentially with the % crystallinity. for both 20 and 40%, reinforced samples.     

On periodic solutions of nonlinear integral equations modelling infectious disease on measure chain

The modelling of the spread of infectious disease is carried out for time t on a measure chain T. Our approach unifies the continuous case and the discrete case . The model is described by the integral equation

where x(t) represents the proportion of the population infected at time t, f(t,x(t)) denotes the proportion of the population newly infected per unit time, and τ is the length of time an individual remains infectious. Using the measure chain calculus, we shall develop criteria for the existence of a nontrivial and nonnegative periodic solution for the modelling equation. The criteria can be implemented numerically, for this we shall give an algorithm as well as illustrative examples.     

Hollow fiber liquid-phase microextraction coupled with gas chromatography-flame ionization detection for the profiling of fatty acids in vegetable oils

The development of a two phase hollow fiber liquid-phase microextraction technique, followed by gas-chromatography-flame ionization detection (GC-FID) for the profiling of the fatty acids (FAs) (lauric, myristic, palmitic, stearic, palmitoleic, oleic, linoleic, linolenic and arachidic) in vegetable oils is described. Heptadecanoic acid methyl ester was used as the internal standard. The FAs were transesterified to their corresponding methyl esters prior to the extraction. Extraction parameters such as type of extracting solvent, temperature, extraction time, stirring speed and salt addition were studied and optimized. Recommended conditions were extraction solvent, n-tridecane; extraction time, 35 min; extraction temperature, ambient; without addition of salt. Enrichment factors varying from 37 to 115 were achieved. Calibration curves for the nine FAs were well correlated (r(2)>0.994) within the range of 10-5000 μg L(-1). The limit of detection (signal:noise, 3) was 4.73-13.21 ng L(-1). The method was successfully applied to the profiling of the FAs in palm oils (crude, olein, kernel, and carotino cooking oil) and other vegetable oils (soybean, olive, coconut, rice bran and pumpkin). The encouraging enrichments achieved offer an interesting option for the profiling of the minor and major FAs in palm and other vegetable oils.     

Mechanistic discussion of cationic crosslinking copolymerizations of 1,2‐epoxycyclohexane with diepoxide crosslinkers accompanied by intramolecular and intermolecular chain transfer reactions

Our previous mechanistic discussion of the free‐radical crosslinking monoallyl/diallyl copolymerizations was extended to the cationic crosslinking monoepoxide/diepoxide copolymerizations, typically including 1,2‐epoxycyclohexane (ECH) as a monoepoxide and bis[3,4‐epoxycyclohexylmethyl] adipate (BECHMA) as a diepoxide crosslinker. In the cationic polymerization, oligomer is usually obtained because of the occurrence of characteristic chain‐forming reactions. Therefore, cationic crosslinking monoepoxide/diepoxide copolymerizations could be in the category of the network formation through free‐radical crosslinking monoallyl/diallyl copolymerizations. Thus, the gelation behavior was discussed by comparing the actual gel points with the theoretical ones; the greatly delayed gelation from theory was observed. Then, the resulting network polymer precursors (NPPs) were characterized by SEC‐MALLS‐viscometry to clarify the cationic crosslinking ECH/BECHMA copolymerization mechanism. Notably, the correlation lines of molecular weight versus elution volume were specific for the NPPs obtained at a high conversion close to the gel point as compared with those obtained by the free‐radical crosslinking monoallyl/diallyl copolymerization. This may be ascribed to the occurrence of intramolecular and intermolecular chain transfer reactions characteristic of cationic polymerization; the chain transfer reactions involve the intramolecular and intermolecular nucleophilic attack of ether oxygen or terminal hydroxyl oxygen in the NPPs to a terminal growing cation that leads to the formation of not only the loop‐ but also the crosslink‐structures containing NPPs, providing fragile ultrahigh‐molecular‐weight NPP in the SEC columns. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Raman spectroscopic investigation on the microenvironment of the liver tissues of Zebrafish (Danio rerio) due to titanium dioxide exposure

Nano titanium dioxide (nTiO₂), generally considered to be toxicologically inert, is manufactured in large quantities and extensively applied in consumer products. The small size and large surface area endow them with an active group or intrinsic toxicity. Advances in instrumentation are making Raman spectroscopy the tool of choice for an increasing number of (bio) chemical applications. One of the great advantages of this technique is its ability to provide information on the concentration, structure and interaction of biochemical molecules in their microenvironments within intact cells and tissues, non-destructively. Zebrafish (Danio rerio), one of the most important vertebrate model organisms used in developmental biology, are increasingly used in biomedical research, particularly as a model of human disease. In the present work, an attempt is made to study the effect of titanium dioxide, both nano and bulk, on the microenvironment of the liver tissues of Zebrafish using FT-Raman spectroscopy. The results of the present study suggest that TiO₂ exposure demonstrate a marked influence on the microenvironments of the liver tissues of Zebrafish. A shift to a higher wavenumber and an increase in the intensity of the band at ∼1087 cm⁻¹ in the TiO₂ exposed tissues suggest that some of the conformational changes resulting from the alkali recovery process takes place due to TiO₂ exposure. The decreased intensity ratio (I₃₂₂₀/I₃₄₀₀) observed in the titanium-exposed tissues suggests a decreased water domain size, which could be interpreted in terms of weaker hydrogen-bonded molecular species of water in the TiO₂ exposed tissues. The observed shift of COO⁻ bands to higher frequencies shows the disruption of salt bridges as a result of a change in the oppositely charged partners and due to the enhanced random coil conformation. The variation in the intensity ratio of the tyrosyl doublet (I₈₅₈/I₈₂₅) indicates variation in the hydrogen bonding of the phenolic hydroxyl group due to TiO₂ exposure. The results further suggest that the microenvironments are greatly altered due to titanium nano exposure when compared to titanium bulk. In conclusion, the results indicate that FT-Raman spectroscopy might be a useful tool for rapid assessment of nano particle biological interactions.