Efficient method for the direct preparation of aryl carboxylates from carboxylic acids using tosyl chloride under solvent-free conditions

A simple, clean and efficient solvent-free procedure for the preparation of aryl carboxylates is described from the direct reaction of carboxylic acids and phenols, in the presence of 1-methylimidazole as base and tosyl chloride (TsCl) as coupling agent. This method can be easily applied for different substituted phenols and carboxylic acids. It can also be applied for the selective acylation when other functional group such as hydroxyl is present on phenol ring.     

Coated wire silver-ion selective electrode based on a N,N'-bis(2-thienylmethylene)-1,2-diaminobenzene.

A novel membrane coated platinum-wire electrode (MCPWE) based on N,N'-bis(2-thienylmethylene)-1,2-diaminobenzene (BTMD) for highly selective determination of Ag+ ion has been developed. The influences of membrane composition and pH on the potentiometric responses of electrode were investigated. The potentiometric responses are independent of the pH of the test solution in the range of 5.0 - 9.0. The electrode shows a linear response for Ag+ ion over the concentration range of 1.0 x 10(-60 to 1.0 x 10(-1) M with a lower detection limit of 6.0 x 10(-7) M. The electrode possesses a Nernstian slope of 59.7 mV decade(-1) and a fast response time of < or = 17 s and can be used for at least 2 months without any observable deviation. The proposed electrode displayed very good selectivity for Ag+ ion with respect to NH4+ and alkali, alkaline earth and some common transition metal ions. The practical utility of the electrode has been demonstrated by its use as the indicator electrode in the potentiometric titration of an AgNO3 solution with a NaI solution and in determination of the silver content of a developed radiological film.     

Ionic strength dependence of stability constants,complexation of W(VI) with iminodiacetic acid

The equilibria between tungsten(VI) and iminodiacetic acid (IDA) have been studied in aqueous solution. The stoichiometry and stability constants of the complexes formed are determined from a combination of potentiometric and Uv spectroscopic measurements. All measurements are carried out at 25°C, pH 7.5 and different ionic strengths ranging from (0.1 to 1.0) mol dm⁻³ (NaClO₄). According to these results, tungsten(VI) forms a mononuclear complex with IDA of the type (WO₃L²⁻). By introducing two empirical parameters C and D in the complex-formation reaction between tungsten(VI) and IDA, the dependence of the dissociation and stability constants on ionic strength is described by a modified Debye-Huckel-type equation. Finally, a pattern for the ionic strength dependence is obtained.     

Gold nanoparticles as a colorimetric sensor for protein conformational changes

Spherical gold nanoparticles and flat gold films are prepared in which yeast iso-1-cytochrome c (Cyt c) is covalently bound to the gold surface by a thiol group in the cystein 102 residue. Upon exposure to solutions of different pH, bound Cyt c unfolds at low pH and refolds at high pH. This conformational change causes measurable shifts in the color of the coated nanoparticle solutions detected by UV-VIS absorption spectroscopy and in the refractive index (RI) of the flat gold films detected by surface plasmon resonance (SPR) spectroscopy. Both experiments demonstrate the same trend with pH, suggesting the use of protein-covered gold nanoparticles as a simple colorimetric sensor for conformational change.     

Ionic strength dependence of formation constants, protonation, and complexation of aspartic acid with dioxovanadium (V)

The stability constants of complexes of dioxovanadium (V) ion and L-asparrtic acid were determined potentiometrically at various ionic strengths of I = 0.1, 0.3, 0.5, and 0.7 mol. dm⁻³ at 25°C. A sodium chloride solution was used to maintain the ionic strength. The parameters based on these formation constants were calculated and the dependence of protonation and the stability constants on ionic strength are described by a Debye-Huckel type equation.     

Laser-induced fluorescence measurement of the nascent rotational distribution of N+2 (X2Σ+g) formed by electron impact on N2

The internal state distribution of ground state N⁺₂ ions formed from N₂ by electron impact ionization is measured under collision-free conditions using laser-induced fluorescence. Analysis of the B–X (0, 0) band shows the rotational distribution to be characterized by a temperature which increases slightly with decreasing electron energy (60–100 eV). Cascade contributions are unimportant.     

Comparing the dynamical effects of symmetric and antisymmetric stretch excitation of methane in the Cl+CH4 reaction

The effects of two nearly isoenergetic C-H stretching motions on the gas-phase reaction of atomic chlorine with methane are examined. First, a 1:4:9 mixture of Cl(2), CH(4), and He is coexpanded into a vacuum chamber. Then, either the antisymmetric stretch (nu(3)=3019 cm(-1)) of CH(4) is prepared by direct infrared absorption or the infrared-inactive symmetric stretch (nu(1)=2917 cm(-1)) of CH(4) is prepared by stimulated Raman pumping. Photolysis of Cl(2) at 355 nm generates fast Cl atoms that initiate the reaction with a collision energy of 1290+/-175 cm(-1) (0.16+/-0.02 eV). Finally, the nascent HCl or CH(3) products are detected state-specifically via resonance enhanced multiphoton ionization and separated by mass in a time-of-flight spectrometer. We find that the rovibrational distributions and state-selected differential cross sections of the HCl and CH(3) products from the two vibrationally excited reactions are nearly indistinguishable. Although Yoon et al. [J. Chem. Phys. 119, 9568 (2003)] report that the reactivities of these two different types of vibrational excitation are quite different, the present results indicate that the reactions of symmetric-stretch excited or antisymmetric-stretch excited methane with atomic chlorine follow closely related product pathways. Approximately 37% of the reaction products are formed in HCl(v=1,J) states with little rotational excitation. At low J states these products are sharply forward scattered, but become almost equally forward and backward scattered at higher J states. The remaining reaction products are formed in HCl(v=0,J) and have more rotational excitation. The HCl(v=0,J) products are predominantly back and side scattered. Measurements of the CH(3) products indicate production of a non-negligible amount of umbrella bend excited methyl radicals primarily in coincidence with the HCl(v=0,J) products. The data are consistent with a model in which the impact parameter governs the scattering dynamics.     

Mechanism for collision-induced transitions between Λ-doublets in 1Π molecules: Reduction to a single scattering potential

The theory is presented for rotational excitation of ¹Π molecules by collisions with rare gas atoms. It is shown that collision dynamics are described by the two electronic potential energy surfaces which correlate with the electronically degenerate Λ components (doublets) in the diatomic molecule. Because the ±Λ degeneracy can alternatively be described as being in the rotational rather than in the electronic degree of freedom, one can reformulate the collision dynamics in terms of a single effective electronic potential which then depends on Φ, the angle of rotation about the diatomic axis. The form of this Φ dependence is found to be identical to that postulated to explain experimental data for collisional transfer of laser-induced fluorescence.     

Green synthesis of banana flavor using different catalysts: a comparative study of different methods

ABSTRACT

Esterification of isoamyl alcohol with acetic acid was studied using different ion-exchange resins, namely Amberlyst 15 dry, Amberlyst 16 wet, Amberlite 120-IR. Esterification was carried out using different esterification methods that are quite new (ohmic, ultrasonic probe, and ultrasonic bath) and the results were compared with microwave-assisted esterification (MAE). The highest isoamyl acetate yield (99%) was obtained by MAE, using a mixture of acetic acid and isoamyl alcohol (mole ratio of 1:2) after 2?h of reaction time. In this process, 2% Amberlyst 15 dry was used. MAE had the least specific energy consumption (0.42?kWh/g isoamyl acetate) and specific CO₂ emission (34?g/g isoamyl acetate). According to the images obtained by scanning electron microscopy, lower amounts of Amberlyst 15 dry beads were destroyed by MAE method compared to other esterification methods. In conclusion, MAE proved to be an economic and environmentally-friendly method for esterification of different flavoring compounds.     

Otto Stern and the double bank shot

In analogy to a double surface scattering study of Estermann, Frisch and Stern for selecting and detecting the velocity of a beam of particles, it is proposed to use double surface scattering to investigate the collision dynamics of a beam of polarized particles with a known surface. In this proposed experiment, the first surface scattering event prepares a polarized (aligned/oriented) beam of particles, and the second surface scattering event permits the measurement of how the polarized beam interacts with the surface under study.