Operational variables in high-performance liquid chromatography-electrospray ionization mass spectrometry of peptides and proteins using poly(styrene-divinylbenzene) monoliths

Capillary reversed-phase high-performance liquid chromatography (RP-HPLC) utilizing monolithic poly(styrene-divinylbenzene) columns was optimized for the coupling to electrospray ionization mass spectrometry (ESI-MS) by the application of various temperatures and mobile phase additives during peptide and protein analysis. Peak widths at half height improved significantly upon increasing the temperature and ranged from 2.0 to 5.4 s for peptide and protein separations at 70 degrees. Selectivity of peptide elution was significantly modulated by temperature, whereas the effect on proteins was only minor. A comparison of 0.10% formic acid (FA), 0.050% trifluoroacetic acid (TFA), and 0.050% heptafluorobutyric acid (HFBA) as mobile phase additives revealed that highest chromatographic efficiency but poorest mass spectrometric detectabilities were achieved with HFBA. Clusters of HFBA, water, and acetonitrile were observed in the mass spectra at m/z values >500. Although the signal-to-noise ratios for the individual peptides diverged considerably both in the selected ion chromatograms and extracted mass spectra, the average mass spectrometric detectabilities varied only by a factor of less than 1.7 measured with the different additives. Limits of detection for peptides with 500 nl sample volumes injected onto a 60 mm x 0.20 mm monolithic column were in the 0.2-13 fmol range. In the analysis of hydrophobic membrane proteins, HFBA enabled highest separation selectivity at the cost of lower mass spectral quality. The use of 0.050% TFA as mobile phase additive turned out to be the best compromise between chromatographic and mass spectrometric performance in the analysis of peptides and proteins by RP-HPLC-ESI-MS using monolithic separation columns.     

Die Reaktionen von Eisen(III)-chlorid mit Trithiazylchlorid. Die Kristallstruktur von [S4N4Cl]+[FeCl4]⊖

Reactions of Iron Trichloride with Trithyazyl Chloride. Crystal Structure of [S₄N₄Cl]⁺[FeCl₄]^? Iron trichloride reacts with (NSCl)₃ yielding S₄N₄[FeCl₄]₂, S₃N₃Cl₂[FeCl₄] or S₄N₄Cl[FeCl₄], depending on the reaction conditions. The i.r. spectra prove the presence of [FeCl₄]^? ions for all three compounds. The ⁵⁷Fe-Mössbauer spectra show a slight quadrupole splitting at 80 K for S₃N₃Cl₂[FeCl₄] (ΔE^Q = 0.42 mm · s^?1) and S₄N₄Cl[FeCl₄] (ΔE^Q = 0.23 mm · s^?1), which indicates a slight deformation of the FeCl₄^? tetrahedra. The crystal structure of S₄N₄Cl[FeCl₄] was determined and refined with X-ray diffraction data (2549 independent reflexions, R = 0.026). S₄N₄Cl[FeCl₄] crystallizes in the triclinic space group P1 with two formula units per unit cell. The lattice constants are a = 712, b = 911, c = 1006 pm, α = 76.5°, β = 83.8° and γ = 80.5°. The structure consists of the so far unknown [S₄N₄Cl]^⊕ cations and slightly deformed FeCl₄^? ions. The [S₄N₄Cl]^⊕ ion consists of a S₄N₄ ring built up of two nearly planar S₃N₂ fragments having a dihedral angle of 136°. The average SN bond length is 157 pm, the SCI bond length 214 pm.     

Reaktionen von Uranpentabromid Die Kristallstrukturen von PPh4[UBr6], PPh4 [UBr6] · 2CCl4, (PPh4)2[UBr6] · 4CH3CN und (PPh4)2[UO2Br4] · 2CH2Cl2

Reactions of Uranium Pentabromide. Crystal Structures of PPh₄[UBr₆], PPh₄[UBr₆] · 2CCl₄, (PPh₄)₂[UBr₆] · 4CH₃CN, and (PPh₄)₂[UO₂Br₄] · 2CH₂Cl₂ PPh₄[UBr₆] and PPh₄[UBr₆] · 2CCl₄ were obtained from UBr₅ · CH₃CN and tetraphenylphosphonium bromide in dichloromethane, the latter being precipitated by CCl₄. Their crystal structures were determined by X-ray diffraction. PPh₄[UBr₆]: 2101 observed reflexions, R = 0.090, space group C2/c, Z = 4, a = 2315.5, b = 695.0, c = 1805.2 pm, β = 96.38°. PPh₄[UBr₆] · 2CCl₄: 2973 reflexions, R = 0.074, space group P2₁/c, Z = 4, a = 1111.5, b = 2114.2, c = 1718.7 pm, β = 95.42°. Hydrogen sulfide reduces uranium pentabromide to uranium tetrabromide. Upon evaporation, bromide is evolved from solutions of UBr₅ with 1 or more then 3 mol equivalents of acetonitrile in dichlormethane yielding UBr₄ · CH₃CN and UBr₄ · 3CH₃CN, respectively. These react with PPh₄Br in acetonitrile affording (PPh₄)₂[UBr₆] · 4CH₃CN, the crystal structure of which was determined: 2663 reflexions, R = 0.050, space group P2₁/c, Z = 2, a = 981.8, b = 2010.1, c = 1549.3 pm, β = 98.79°. By reduction of uranium pentabromide with tetraethylammonium hydrogen sulfide in dichloromethane (NEt₄)₂[U₂Br₁₀] was obtained; (PPh₄)₂[U₂Br₁₀] formed from UBr₄ and PPh₄Br in CH₂Cl₂. Both compounds are extremely sensitive towards moisture and oxygen. The crystal structure of the oxydation product of the latter compound, (PPh₄)₂[U0₂Br₄]· 2 CH₂Cl₂, was determined: 2163 reflexions, R = 0.083, space group C2/c, Z = 4, a = 2006.3, b = 1320.6, c = 2042,5 pm, β = 98.78°. Mean values for the UBr bond lengths in the octahedral anions are 266.2 pm for UBr₆-, 276.7 pm for UBr₆^2? and 282.5 pm for UO₂Br₄^2?     

Existence of pulses in excitable media with nonlocal coupling

We prove the existence of fast traveling pulse solutions in excitable media with non-local coupling. Existence results had been known, until now, in the case of local, diffusive coupling and in the case of a discrete medium, with finite-range, non-local coupling. Our approach replaces methods from geometric singular perturbation theory, that had been crucial in previous existence proofs, by a PDE oriented approach, relying on exponential weights, Fredholm theory, and commutator estimates.     

Thermal processes in the systems with Li-battery cathode materials and LiPF6 -based organic solutions

Thermodynamic instability of positive electrodes (cathodes) in Li-ion batteries in humid air and battery solutions results in capacity fading and batteries degradation, especially at elevated temperatures. In this work, we studied thermal interactions between cathode materials Li₂MnO₃, xLi₂MnO₃ ^.(1???x)Li(MnNiCo)O₂,LiNi_0.33Mn_0.33Co_0.33O₂, LiNi_0.4Mn_0.4Co_0.2O₂, LiNi_0.8Co_0.15Al_0.05O₂ LiMn_1.5Ni_0.5O₄, LiMn(or Fe)PO₄, and battery solutions containing ethylene carbonate (EC) or propylene carbonate (PC), dimethyl carbonate (DMC) or ethylmethyl carbonate (EMC) and LiPF₆ salt in the temperature range of 40–400 °C. It was found that these materials are stable chemically and well performing in LiPF₆-based solutions up to 60 °C. The thermal decomposition of the electrolyte solutions starts >180 °C. The macro-structural transformations of cathode materials upon exothermic reactions were studied by transmission electron microscopy (TEM), X-ray difraction (XRD) and Raman spectroscopy. Differential scanning calorimetry (DSC) studies have shown that the exothermic reactions in the temperature range of 60–140 °C lead to partial decomposition of both the cathode material and electrolyte solution. The systems thus formed consisted of partially decomposed solutions and partially chemically delithiated cathode materials covered by reactions products. Thermal reactions terminate and this system reaches equilibrium at about 120 °C. It remains stable up to the beginning of the solution decomposition at about 180 °C. The increased content of surface Li₂CO₃ is found to significantly affect the thermal processes at high temperature range due to extensive exothermic decomposition at low temperatures.     

Magnetic alignment in nominally non-magnetic hexagonal metal hydrides: NMR

Powders of three hexagonal metal-hydrides or -deuterides are found to align in 4.4–8.3 T magnetic fields used for NMR. The field-alignment is unexpected, since all three systems have very small susceptibilities, as demonstrated by sharp NMR lines. The extent of alignment runs from nearly complete to barely detectable in ZrBe₂(H,D)_x, LuD₃, and YD₃, respectively. The preferred alignment direction in ZrBe₂(H,D)_x is with the crystallites’ c-axis perpendicular to B, while the c-axis and B tend to be parallel in LuD₃ and YD₃. The susceptibilities χ_|| and χ are determined from bulk magnetization measurements in aligned ZrBe₂H_1.4 powder. The alignment must be considered for proper analysis of NMR spectra in these and related materials.