Nonstationary deformation of an elastic plate with a notch under the action of a shock wave

The behavior of a thin elastic plate with a rectilinear notch under the action a weak shock wave in air is studied experimentally. A technique is developed for this purpose. The effect of the notch on the strain state of the plate is analyzed __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 11, pp. 99–104, November 2007.     

Probe Raman spectroscopy of sodium uranyl-acetate microcrystals

The technique for recording Raman spectra in uranium compounds using a probe minispectrometer with a multielement radiation detector has been developed. A selective filter, which reflects exciting laser radiation and transmits Raman signals, has been used to suppress the exciting radiation. It is shown that the technique developed makes it possible to record Raman spectra from a small amount (~10^–5 g) of sodium uranyl-acetate polycrystals in a wide spectral range for several seconds.     

Synthesis of the non-reducing end trisaccharide of the antithrombin-binding domain of heparin and its bioisosteric sulfonic acid analogues

A glucoronic acid-containing trisaccharide related to the antithrombin-binding DEFGH domain of heparin and its methanesulfonic acid analogues were synthesized. Trisaccharides without sulfonic acid content or possessing a sulfonatomethyl moiety at position 2 or 6 of unit F were prepared in high yields by [DE+F] couplings using the same disaccharide uronate donor, respectively. Synthesis of the trisaccharide with a 3-deoxy-3-sulfonatomethyl function was accomplished in three different pathways, from which a [D+EF] coupling and applying a non-oxidized precursor of the glucuronic acid afforded the trisaccharide in the highest yield.     

Dynamic Interfacial Behavior of Poly(oxyethylene) Lauryl Ether Based Surfactant Mixtures

The adsorption behavior of binary mixtures comprising nonionic surfactants at the air–water interface has been studied by bubble pressure tensiometry at concentrations above and below their critical micelle concentrations. Surfactants with the same hydrocarbon chains but different degree of ethoxylations were chosen as the components to understand their mixing behavior at equilibrium and dynamic conditions. At short times, the adsorption is found to be diffusion limited for individual components as well as for the mixtures, as predicted by the Ward and Tordai model. The effective diffusion coefficient of the monomers in the mixed state displays a dynamic synergism, consistent with the molecular thermodynamic model for dynamic surface tension. However, the equilibrium surface tension and micellar diffusion coefficient of the mixtures exhibit ideal behavior.     

Poly(allylamine hydrochloride) Functionalized Multiwalled Carbon Nanotube Modified Carbon Paste Electrode as Acetylcholinesterase Biosensor Transducer

In this work, a sensitive, practical and reliable acetylthiocholine (ATCh) biosensor based on poly(allylamine hydrochloride) functionalized multiwalled carbon nanotube (PAH/MWCNT) was fabricated and used for pesticide detection. As far as we know, this is the first work that constitutes the usage of PAH and MWCNT for ATCh biosensor. The developed system was characterized by using scanning electron microscopy, electrochemical impedance spectroscopy and cyclic voltammetry. The influence of parameters such as enzyme amount and pH were examined and a linearity between 5×10^?5 M?2.0×10^?3 M for ATCh was obtained. The proposed biosensor was applied for a model pesticide, monocrotophos, detection. The analytical curve showed an excellent linearity in the monocrotophos concentration range of 1–25 pg/mL with an incubation time of 5 min. Limit of detection and limit of quantification values were calculated as 0.88 and 2.9 pg/mL, respectively. The system was also applied for detection of monocrotophos in grape, tomatoe, tap and mineralized water samples and promising recovery values were obtained.     

Ecotoxicological characterisation of exhaust particulates from diesel-powered light-duty vehicles

Diesel exhaust is one of the major sources of fine and ultrafine particulate matter in urban air. Toxicity of diesel-powered engine emissions has been quite widely assessed, however, much less information is available on their ecotoxicity. In our study the kinetic version of the Vibrio fischeri bioluminescence inhibition bioassay, based on the ISO 21338:2010 standard, was used to characterise the ecotoxicity of diesel-powered cars. The method is sensitive enough to test the ecotoxic effect of the emission of individual vehicles. In general, significant positive correlation was found between ecotoxicity (expressed as Toxic Unit /TU/values) and total carbon (TC) as well as between TU and polycyclic aromatic hydrocarbon (PAH) concentrations.      

Trace level triacetone-triperoxide identification with SPME–GC-MS in model systems

Triacetone-triperoxide is a high explosive mainly used by terrorist groups. With the spreading of the recipe on the Internet, increasing number of bomb attacks are being reported worldwide using triacetone-triperoxide. A simple identification method is described using 100 μm polydimethyl siloxane fibre solid phase microextraction and gas chromatography combined with spectrometry. The method was tested on various pre- and post-explosion models that can be collected in a house search or after a bomb attack. Sample preservation and stability was also examined. Identification of triacetone-triperoxide residues in post-explosion models was feasible 24 h after ignition, the detection limit being 5 ng.     

Ab initio calculation of the Young's modulus of α‐polyamides

In earlier works the supermolecule model has been applied to the calculation of the Young's modulus of crystalline polyethylene and polyamide‐6. In the supermolecule model a crystalline polymer is represented as a single finite chain divided into a head, body, and tail part. The body contains a number of monomer units and is representative for a polymer chain. In this article, this model has been used to study the geometric properties and the elastic moduli of the α form of other polyamides: polyamide‐2 (or polyglycine), polyamide‐3, polyamide‐4, polyamide‐11, and polyamide‐6,6. All calculations have been performed with a linearly constrained body. The results have been compared to other theoretical and experimental results if available. © 2002 Wiley Periodicals, Inc.; DOI 10.1002/qua.2002;10121