Net Charge Fluctuation and String Fragmentation

We present the simulation results of the net charge fluctuation in Au Au collisions at √Snn=130 GeV from a dynamic model, JPCIAE, and its revisions. The simulations are done for the quark-gluon matter, the directly produced pions, the pion matter, and the hadron matter. The simulated net charge fluctuation of the quark-gluon matter is close to the thermal model prediction for the quark-gluon gas. However, the discrepancy exists comparing the simulated net charge fluctuation for directly produced pions and the pion matter with the thermal model prediction for pion gas and the resonance pion gas, respectively. The net charge fluctuation of hadron matter from default JPCIAE simulations is nearly 3.5 times larger than quark-gluon matter. A discussion is given for the net charge fluctuation as an evidence of QGP phase transition.     

Studies on the kinetics of growth of silver nanoparticles in different surfactant solutions

We produced gels using electrolytic-reduction ion water and magnesium aluminum silicates (smectone^®), and evaluated in detail gel properties in the presence of various types of salt (NaCl, KCl, CaCl₂, MgCl₂, and AlCl₃). Each salt was added to deionized-distilled water or electrolytic-reduction ion water, and phase diagrams for the smectone^® concentration (2.0–4.0%) were produced. The areas of the three phases of smectone^® (gel, sol, and separation) at each salt concentration were expressed as percentages of the total area. As a result, uni- and polyvalent cations (excluding Ca²⁺ ions) affected the stability of gels produced using electrolytic-reduction ion water, and, particularly, univalent cations (Na⁺, K⁺) markedly improved gel stability.Using electrolytic-reduction ion water as a dispersal medium, drug delivery systems (DDS) that can maintain the gelling state can be prepared. Thus, gel preparations with maintained functions or controlled-release transdermal drugs can be obtained.     

在RHIC的极限碎裂和Ф介子产生(英文)

利用强子和串级联模型LUCIAE研究了PHOBOS的极限碎裂等以及在PHIC进行的Au +Au碰撞中带电粒子多重性的经验标度规律 .对介子的产生机制也通过与带电粒子多重性的比较进行类似的研究 .结果似乎表明在串级碎裂模型中带电粒子和介子有共同的产生机制 .还讨论了PHOBOS经验标度规律的模型依赖性 .     

相对论性核碰撞中Φ介子产生和弦碎裂函数

用强子和弦级联模型LUCIAE系统研究从AGS到SPS,到RHIC,再到LHC能量核–核碰撞中Φ介子产生.采用与能量有关弦碎裂函数,并通过与荷电粒子多重数实验数据的比较确定其中的参数后,LUCIAE模型给出的Φ介子产额与实验数据也都相近,得到的事件平均弦碎裂变量随能量之增趋饱和规律,可能是核穿透性能量行为的定性表示.     

AxMn1-xFe2O4铁氧体(A=Zn,Ni)中阳离子的占位有序化行为研究

基于尖晶石晶体结构信息,本文采用热力学三亚晶格模型,将材料热力学计算和第一性原理计算相结合,研究了Zn_xMn_(1-x) Fe_2O_4和Ni_xMn_(1-x)Fe_2O_4立方相中的Zn~(2+)、Ni~(2+)、Mn~(2+)以及Fe~(3+)在8a和16d亚晶格上的占位有序化行为。结果表明:在锰铁氧体中,室温下Mn~(2+)完全占据在8a亚晶格上,Fe~(3+)完全占据在16d亚晶格上,属于正尖晶石结构;随着热处理温度升高,在1 273 K达到热处理平衡时的占位构型为(Fe~(3+)0.09Mn~(2+)0.91)[Fe~(3+)1.91Mn~(2+)0.09]O_4,在热处理温度升至1 473 K时,达到热处理平衡时的占位构型为(Fe~(3+)0.11Mn~(2+)0.89)[Fe~(3+)1.89Mn~(2+)0.11]O_4,均与实验结果符合较好。在锌铁氧体中,室温下Zn~(2+)完全占据在8a亚晶格上,Fe~(3+)完全占据在16d亚晶格上,属于正尖晶石结构;在热处理温度较高时,Zn~(2+)和Fe~(3+)发生部分置换,符合实验结果。在镍铁氧体中,半数的Fe~(3+)在室温下占据在8a亚晶格上,Ni~(2+)与剩下另一半的Fe~(3+)共同占据在16d亚晶格上,仅在热处理温度较高的时候发生微弱变化,亦与已有的实验结果吻合。在此基础上,本文进一步通过热力学模型研究了立方相尖晶石结构的Zn_xMn_(1-x)Fe_2O_4、Ni_xMn_(1-x)Fe_2O_4复合体系中阳离子占位行为与热处理温度对占位的影响规律。     

高能核碰撞中带电多重数快度与能量和中心度的关系

用强子–弦级联模型JPCIAE及相应的Monte Carlo事例产生器研究相对论性核–核碰撞中带电粒子多重数的赝快度密度对能量和中心度的依赖关系.无需另调任何模型参数的条件下,此模型可以同时较好地描述相对论性pp实验数据及PHOBOS和PHENIX实验组的Au+Au实验数据.本文指出:因〈N_part〉并非严格定义的物理量,致使实验上和理论上确定〈N_part〉有一定任意性,从而使得每参加者核子对的带电粒子赝快度密度随着〈N_part〉的增加可能逐渐增大,也可能逐渐减小,因此用它来区分粒子产生机制是欠妥的.     

Revêtements modérés et groupe fondamenttal de graphe de groupes

Let R be a discrete complete valuation ring, with algebraically closedresidue field. Let X be a semi-stable R-curve, with smooth generic fibre. In this paper we study tame coverings of X.     

相对论性核碰撞中φ介子增强

用强子和弦级联模型LUCIAE系统地研究了相对论性p+p和Pb+Pb碰撞中φ介子产生.在模型框架内实验测得的158AGeV/cPb+Pb碰撞中φ介子产额相对于同能量p+p碰撞的增强现象,依赖于弦发射胶子的集体效应和奇异夸克压低约化两机制,在一定程度内能得到解释.     

以LCD为目标的自动定焦判据选择

在光学综合自动测量中 ,使用液晶显示屏作为分划板可以大大简化结构 ,提高效率 ,真正地实现自动测量。由于液晶显示具有对比度低、噪声大等特点 ,所以根据液晶的这些特点以及图像处理和CCD信号接收的特点选择两种适用的判据进行了分析和试验比较 ,并给出了结果。结果表明 ,这两种判别函数都适用于以液晶显示屏为目标和用图像处理方法进行光学参数测量的系统 ,其中锐度判别函数更优于信息熵判别函数 ,前者具有更好的抗干扰性和稳定性 ,而且其判定结果更接近目视清晰度判别     

Shape-directing role of cetyltrimethylammonium bromide in the preparation of silver nanoparticles

We report a simple chemical reduction method for the synthesis of different colored silver nanoparticles, AgNP, using tyrosine as a reducing agent. Effects of cetyltrimethylammonium bromide, CTAB, and tyrosine concentrations are analyzed by UV-visible measurements and scanning electron microscopy (SEM) to evaluate the mode of AgNP aggregation. The position and shape of the surface resonance plasmon absorption bands strongly depend on the reaction conditions, i.e., [CTAB], [tyrosine], and reaction time. Sub-, post-, and dilution-micellar effects are accountable for the fast and slow nucleation and growth processes. Spectrophotometric measurement also shows that the average size and the polydispersity of AgNP increase with [CTAB] in the solution. CTAB acted as a shape-directing agent.