A systematic study for the structures and properties of phosphorylated pulp fibers prepared under various conditions

Cellulose - A bleached softwood kraft pulp was phosphorylated with (NH4)2HPO4 and urea at 150 ℃ for 0‒40 min, and the structures and properties of the resulting...     

XPS study of silicon spheres as a density standard

As density is one of the basic physical properties of materials, an accurate density standard is absolutely essential. To determine density with high accuracy and precision, two 1-kg single-crystal silicon spheres (NMIJ-S4 and NMIJ-S5) are used as the primary standard at the National Metrology Institute of Japan. For the accurate measurement of the mass and volume of the silicon spheres, the effects of the surface layer must be carefully considered. In this work, a surface layer model of NMIJ-S4 and NMIJ-S5 was proposed and the thicknesses of each surface layer were determined using X-ray photoelectron spectroscopy. A detailed uncertainty budget is presented to aid use of the density standard.     

TiC-MgO composite: an X-ray transparent and machinable heating element in a multi-anvil high pressure apparatus

ABSTRACT

TiC-MgO composite was developed as a heating element for X-ray study in the multi-anvil high pressure apparatus. We synthesized TiC-MgO blocks (50–70 wt.% of TiC) by compression in a cold isostatic press followed by baking in a gas flow furnace. Heaters of tubular shape were manufactured from the synthesized blocks either by lathe or numerically controlled milling machine. The so-produced heating elements have been proved to generate temperatures up to 2250?K at 10?GPa, condition where classical graphite heaters are not suitable anymore due to graphite-diamond transition. These new heaters have been successfully used for in situ X-ray radiography and diffraction measurements on liquid Fe alloys, exploiting excellent X-ray transparency.     

Interpretation of the Role of Composition on the Inclusion Efficiency of Monovalent Cations into Cobalt Hexacyanoferrate

Cobalt hexacyanoferrate of various compositions was prepared in flow mode and the role of the vacancy on the structure, thermogravimetric (TG) properties, and the adsorption efficiency was studied. The material, Na_yCo[Fe(CN)₆]_1−x ⋅ z H₂O, with a minimum vacancy of x=0.014 to the highest x=0.47, was obtained. The TG-differential scanning calorimetry (DSC) profile showed a distinct influence of the vacancy on the water release temperature. Materials with x>0.35 showed a smooth release of water at a relatively lower temperature. However, for the materials with x<0.35, water release took place in multiple steps, suggesting the existence of various forms of water. The FTIR profiles supported the existence of free and bonded water molecules. However, the materials with multiple water peaks in the FTIR spectra showed a shift of the major XRD peaks when heated at 285 °C in N₂ atmosphere. Regarding the effect of the vacancy on the adsorption behavior, for NH₄, the adsorption was found to be proportional to the number of Na atoms in the material, confirming the ion-exchange process. On the contrary, the materials with low vacancy and high Na content showed nominal Cs adsorption capacity. Interestingly, the K adsorption capacity was found to be in between that of the other two ions. This means the ionic size decides the rate of placement into the interstitial sites. For larger ions like Cs, the ease of percolation via the vacancy decides the overall adsorption efficiency.     

Influence of contamination layer on thickness evaluation by X-ray reflectometry

In this study, the effect of allowing for a contamination layer on a SiO₂ film/Si substrate system on thickness determination by X-ray reflectometry (XRR) was investigated. The calculated XRR profiles obtained using a calculation model that utilizes a contamination layer for analysis showed good agreement with measured profiles. Further, the obtained physical structures were promising and within acceptable limits. Where the existence of a contamination layer was ignored in the calculation process, a part of the thickness of the contamination layer was incorporated into the determined thickness of the SiO₂ layer. In that case, the evaluated thickness was proportional to the density ratio between the contaminated and SiO₂ layers. The results of investigation of the effect of X-ray energy on layer thickness determination indicated that the effects of contamination also depend on the X-ray energy used for XRR measurements. These effects increase in the case of experiments that employ X-ray energy with a high contrast for the contamination.     

Radioactivity characterization of 125I brachytherapy seeds used in prostate cancer treatment

Journal of Radioanalytical and Nuclear Chemistry - A procedure for characterizing the activity amount of 125I seed was developed in order to establish a secondary standard activity measurement...     

Effect of chain architecture on the phase transition of star and cyclic poly(N‐isopropylacrylamide) in water

The heat‐induced phase transition of aqueous solutions of Poly(N‐isopropylacrylamide) (PNIPAM) in water is examined for a four‐arm PNIPAM star (s‐PNIPAM), a cyclic PNIPAM (c‐PNIPAM), and their linear counterparts (l‐PNIPAM) in the case of polymers (1.0 g L^?1) of 12,700 g mol^?1 < M_n < 14,700 g mol^?1. Investigations by turbidity, high‐sensitivity differential scanning calorimetry (HS‐DSC), and light scattering (LS) indicate that the polymer architecture has a strong effect on the cloud point (T_c: decrease for s‐PNIPAM; increase for c‐PNIPAM), the phase transition enthalpy change (ΔH decrease for s‐PNIPAM and c‐PNIPAM), and the hydrodynamic radius of the aggregates formed above T_c (R_H: c‐PNIPAM < s‐PNIPAM < l‐PNIPAM). The properties of s‐PNIPAM are compared with those of previously reported PNIPAM star polymers (3 to 52 arms). The overall observations are described in terms of the arm molecular weight and the local chain density in the vicinity of the core of the star, by analogy with the model developed for PNIPAM brushes on nanoparticles or planar surfaces. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2059–2068.