Predictive QSAR modeling for the antioxidant activity of natural compounds derivatives based on Monte Carlo method

Molecular Diversity - In this research, QSAR modeling was carried out through SMILES of compounds and on the basis of the Monte Carlo method to predict the antioxidant activity of 79 derivatives of...     

Reducing Occupational Noise Propagated from Centrifugal Fan through Dissipative Silencers: A Field Study

Acoustic performance of dissipative silencer was evaluated to determine the effectiveness of perforated duct porosity and absorbent material density in reducing occupational noise exposure propagated from centrifugal fan. Design charts were applied to predict noise reduction and length of a dissipative silencer. Dissipative silencers with various punched duct porosity (14%, 30% and 40%) and sound absorbent density (80 Kg/m³, 120 Kg/m³, and 140 Kg/m³) were designed and fabricated. According to ISO9612 and ISO11820, noise level was measured before and after installing all nine test silencers at fixed workstations around the discharge side of a centrifugal fan in a manufacturing plant. On average, the noise level at the discharge side of a fan without silencer was measured to be 93.6 dBA, whereas it was significantly mitigated by 67.4 dBA to 70.1 dBA after installing all silencers. Dynamic insertion loss for a dissipative silencer with 100 cm length was predicted to be 27.9 dB, which was in agreement with experimental ones. Although, there was no significant differences between insertion loss of silencers, the one with 30% porosity and 120 Kg/m³ rock wool density had the highest insertion loss of 26.2 dBA. Dissipative silencers noticeably reduced centrifugal fan noise exposures. Increasing sound absorbent density and duct porosity up to a certain limit could probably be effective in noise reduction of dissipative silencers.     

Hydrodesulfurization unit for natural gas condensate

Journal of Thermal Analysis and Calorimetry - Nowadays, most of the world’s energy consumption is from fossil fuels. One of these fossil fuels is natural gas condensate which consists of...     

Quantum conductance investigation on carbon nanotube–based antibiotic sensor

Journal of Solid State Electrochemistry - Nanostructured carbon material (NSCM) based chemiresistive sensors are popular for sensing different analytes because of their high sensitivity, low cost,...     

Methylthiouracil‐modified Carbon Paste Electrode as a New Voltammetric Sensor Based on a 1,4‐Michael Addition Reaction for Detection of Dopamine

A sensitive dopamine sensor was constructed based on the modified carbon paste electrode with methylthiouracil as a nucleophile in the 1,4‐Michael addition reaction. An ECE mechanism was suggested for dopamine oxidation at the modified electrode. Design of experiments was used in the optimization of variables. Under the optimum conditions, calibration graph was linear in the range of 0.20–15.0 µM with a detection limit of 73 nM. The relative standard deviations (n=5) for 0.50 µM of dopamine was 3.83 %. The selectivity of the sensor was also studied. The developed sensor was applied for analysis of pharmaceutical and biological samples.     

Predict the thermal conductivity of SiO2/water–ethylene glycol (50:50) hybrid nanofluid using artificial neural network

Journal of Thermal Analysis and Calorimetry - In the current work, after generating experimental data points for different volume fraction of nanoparticles ( $$\phi$$ ) and different temperatures,...     

Influence of ionic liquid counterions on activity and selectivity of ethylene trimerization using chromium-based catalysts in biphasic media

In recent years ionic liquids (ILs) have attracted much interest because of their widespread use in various fields. Several trimerization and oligomerization catalysts have been evaluated in ILs with different organic–inorganic hybrid structures. High catalytic activity and selectivity, easy product separation, and recycling of the catalyst are the advantages of a biphasic catalyst system compared to the homogeneous catalysts. In this study, the influence of IL counter-anions on activity and selectivity of the ethylene trimerization catalysts based on Cr-SNS-R was investigated. All synthesized materials were characterized using Fourier-transform infrared spectroscopy, ¹H NMR, ¹³C NMR, UV–Vis. spectroscopy, thin-layer chromatography, and elemental analysis (CHNS). In ethylene trimerization reaction, the dodecyl substituent in the SNS ligand exhibited better activity and selectivity than the butyl substituent. The results revealed that the presence of BF₄⁻ as a counter-anion in the IL led to an increase in activity and selectivity compared to Br⁻ and I⁻ counter-anions. It was found that the BF₄⁻ counter-anion plays a conclusive role in the development of 1-hexene activity and selectivity to a maximum amount of 71,132 g_1-C6/(g_Cr × h) and more than 99%, respectively. Finally, the catalyst was reused thrice without losing its 1-hexene selectivity.     

Synthesis,characterization, and cytotoxic activity studies of new N4O complexes derived from 2-({3-[2-morpholinoethylamino]-N3-([pyridine-2-yl]methyl) propylimino} methyl)phenol

A new unsymmetrical five-coordinate Schiff base ligand (HL) with an N₄O donor set ( 2 ) has been prepared by condensation of N1-(2-morpholinoethyl)-N1-([pyridine-2-yl]methyl)propane-1,3-diamine with 2-hydroxy-benzaldehyde. Metal complexes [ML]ⁿ⁺ (M = Zn²⁺, Cd²⁺, Mn²⁺, Cu²⁺, Ni²⁺, Ag⁺, Fe³⁺, and Co²⁺ ( 3–10 ) were synthesized by the reaction of the ligand and metal salts in ethanol. The resulting products were characterized by elemental analyses, infrared, ¹H and ¹³C nuclear magnetic resonance spectra (in the case of Cd and Zn complexes), UV–Vis, electrospray ionization-mass spectrometric, and conductivity measurements. The structure of the complexes [ZnL](ClO₄) ( 3 ), [CdL](ClO₄) ( 4 ), and [CuL](ClO₄) ( 7 ) has been determined by single-crystal X-ray diffraction analysis. The metal complexes were determined to have a distorted trigonal bipyramidal (Zn and Cd) or a distorted square pyramidal (Cu) geometry. The cytotoxic potential of each compound (1–10) against MCF-7 and MDA-MB-231 (breast cancer cells), PC-3 (prostate cancer cells), and WI-38 human normal lung fibroblast cells was evaluated using the MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyl tetrazolium bromide) assay. Compounds 1, 2, and 10 did not display any activity toward any cell line tested. None of the compounds except compound 8 was cytotoxic toward PC-3. Compounds 4 and 8 showed the highest cytotoxic activity against the MCF-7 and MDA-MB-231 cell lines. Because compounds 3, 6, and 9 have similar half-maximal inhibitory concentration values against cancer cells and normal cells, these compounds displayed poor selectivity between cancer and normal cells. More importantly, it was observed that compound 5 acts differently toward different types of cell lines. For example, it displays lower cytotoxicity against the WI-38 normal cell line than it does against the MDA-MB-231 cell line.     

Optimization of cadmium adsorption from aqueous solutions by functionalized graphene and the reversible magnetic recovery of the adsorbent using response surface methodology

Novel functionalized graphene adsorbent was prepared and characterized using different techniques. The prepared adsorbent was applied for the removal of cadmium ions from aqueous solution. A response surface methodology was used to evaluate the simple and combined effects of the various parameters, including adsorbent dosage, pH, and initial concentration. Under the optimal conditions, the cadmium removal performance of 70% was achieved. A good agreement between experimental and predicted data in this study was observed. The experimental results revealed of cadmium adsorption with high linearity follow Langmuir isotherm model with maximum adsorption capacity of 502 mg g^?1, and the adsorption data fitted well into pseudo‐second order model. Thermodynamic studies showed that adsorption process has exothermic and spontaneous nature. The recommended optimum conditions are: cadmium concentration of 970 mg L^?1, adsorbent dosage of 1 g L^?1, pH of 6.18, and T = 25 °C. The magnetic recovery of the adsorbent was performed using a magnetic surfactant to form a noncovalent magnetic functionalized graphene. After magnetic recovery of the adsorbent both components (adsorbent and magnetic surfactant) were recycled by tuning the surface charges through changing the pH of the solution. Desorption behavior studied using HNO₃ solution indicated that the adsorbent had the potential for reusability.     

Microwave‐associate synthesis of Co3O4 nanoparticles as an effcient nanocatalyst for the synthesis of arylidene barbituric and Meldrum's acid derivatives in green media

In this study, Co₃O₄ nanocatalysts were constructed in environmentally appropriate conditions using controlled, effective, and facile microwave method. The final nanostructures were characterized by SEM, XRD, and TEM analyses. The products had a small size distribution, homogeneous morphology, and crystallographic structures associated with the formation of Co₃O₄ nanostructures. Moreover, EDS mapping analysis confirmed the existence of Co and O elements in the final structure, and the magnetic properties of the samples were investigated by VSM. The application of this nanostructure in a catalytic process was further examined, and the results suggested that it could be used as a novel candidate for the synthesis of arylidene barbituric and Meldrum^,s acid through Knoevenagel condensation of aldehydes by barbituric and Meldrum^,s acid in aqueous media. The high yield of these nanocatalysts would be justified by the nature of the nanostructure as well as the experimental procedure developed in this study, which affected the physicochemical features of the products.