Strategic arrivals to queues offering priority service

Queueing Systems - We consider strategic arrivals to a FCFS service system that starts service at a fixed time and has to serve a fixed number of customers, for example, an airplane boarding...     

Atomic Layer Deposited Ti2O3 Thin Films

Ti₂O₃ thin films have been prepared through atomic layer deposition and subjected to electrical resistivity measurements as a function of temperature. The as-prepared films were stable for up to three weeks. In Ti₂O₃ thin films, the insulator-metal transition is observed at ∼80 K, with nearly 3–4 orders of magnitude change in resistivity. The anomalous increase in electrical resistivity in the films is in accordance with the two-band model. However, the energy interval between the bands depending on the crystallographic c/a ratio leads to a change in electrical resistivity as a function of temperature.     

Effect of a Nanoclay on the Mechanical,Thermal and Flame Retardant Properties of Rigid Polyurethane Foam

Water blown rigid polyurethane foams (PUF) with organoclay/organically modified nanoclay (ONC) were prepared and their properties such as density, mechanical, morphological, insulation, thermal and flame retardant properties were studied. In this investigation, the ONC content was varied from 1 to 10 parts per hundred of polyol (php) by weight. It was observed that the compressive strength of ONC filled PUF increased up to 3 php of ONC loading and then it decreased. Wide angle X-ray diffraction and transmission electron microscopy studies indicated the exfoliated dispersion of ONC in PUF. The thermal conductivity of ONC filled PUF decreases up to 5 php and then increases. The glass transition temperature (Tg) of PUF decreases on loading of ONC. The TGA analysis shows that there is slight increase in degradation temperature with increase in ONC loading. The flame retardant properties (LOI and flame spread rate) are improved slightly on addition (3 php) of ONC filled PUF.     

Highly Luminescent Colloidal Eu3+‐Doped KZnF3 Nanoparticles for the Selective and Sensitive Detection of CuII Ions

This article describes a green synthetic approach to prepare water dispersible perovskite‐type Eu³⁺‐doped KZnF₃ nanoparticles, carried out using environmentally friendly microwave irradiation at low temperature (85 °C) with water as a solvent. Incorporation of Eu³⁺ ions into the KZnF₃ matrix is confirmed by strong red emission upon ultraviolet (UV) excitation of the nanoparticles. The nanoparticles are coated with poly(acrylic acid) (PAA), which enhances the dispersibility of the nanoparticles in hydrophilic solvents. The strong red emission from Eu³⁺ ions is selectively quenched upon addition of Cu^II ions, thus making the nanoparticles a potential Cu^II sensing material. This sensing ability is highly reversible by the addition of ethylenediaminetetraacetic acid (EDTA), with recovery of almost 90 % of the luminescence. If the nanoparticles are strongly attached to a positively charged surface, dipping the surface in a Cu^II solution leads to the quenching of Eu³⁺ luminescence, which can be recovered after dipping in an EDTA solution. This process can be repeated for more than five cycles with only a slight decrease in the sensing ability. In addition to sensing, the strong luminescence from Eu³⁺‐doped KZnF₃ nanoparticles could be used as a tool for bioimaging.     

Novel Schiff bases–based thiophenes: Design,synthesis and biological evaluation

2-amino-5-(3-fluoro-4-methoxyphenyl)thiophene-3-carbonitrile derivatives have been synthesized from 1-(3-fluoro-4-methoxyphenyl)ethanone, malononitrile, mild base, and sulfur powder using the Gewald method through a multistep reaction sequence. The structures of newly synthesized compounds were established on the basis of their elemental analyses, IR, ¹H NMR, ¹³C NMR, and mass spectral data, and then synthesized compounds were screened for their in vitro antimicrobial activity. Among them, derivatives 3b (thiphene), 3f (pyrazole), and 3d (halogen) showed good activity and remaining derivatives exhibited moderate activity.     

Sensitivity enhancement and matrix effect evaluation during summation of multiple transition pairs—case studies of clopidogrel and ramiprilat

Sensitivity enhancement via summation of multiple MRM transition pairs is gaining popularity in tandem mass spectrometric assays. Numerous validation experiments describing the assays for two model substrates, clopidogrel and ramiprilat, were performed. The quantitation of clopidogrel was achieved by the summation of transition pairs m/z 322.2 to m/z 212.0 and m/z 322.2 to m/z 184.0, while that of ramiprilat was achieved by the summation of transition pairs m/z 389.2 to m/z 206.1 and m/z 389.2 to m/z156.1. The use of summation approach achieved sensitivities of >2 fold for both compounds as compared with the reported single MRM transition pair assays. The validation experiments addressed some important assay development issues, such as: (a) lack of impact of matrix effect; (b) unequivocal verification of the percentage contribution of each MRM transition pair towards sensitivity; (c) sensitivity enhancement factor achieved by summation approach of MRM transition pairs; and (d) accurate prediction of quality control samples using summation approach vs a single MRM transition pair. In summary, the appropriateness of using two MRM transition pairs for quantitation was demonstrated for both clopidogrel and ramiprilat. Additionally, pharmacokinetic application of the MRM transition pair assays using a summation approach was established for the two compounds. Copyright © 2009 John Wiley & Sons, Ltd.     

Thermal studies of furosemide–caffeine binary system that forms a cocrystal

Thermal techniques, differential scanning calorimetry (DSC), and hot stage microscopy (HSM) have been used to study the interactions between furosemide and caffeine that are known to form a 1:1 cocrystal. This system has been used as an example to study the probable mechanism of cocrystal formation when the individual components, which are polymorphic, are heated. The study indicates that the phase transition of the low temperature stable polymorph of furosemide initiates cocrystal formation. This result suggests increased mass transfer rate can trigger cocrystal formation. The binary phase diagram (composition–temperature plots) of furosemide–cocrystal–caffeine system was determined from the DSC curves. The results imply that the cocrystal forms eutectic with caffeine but not with furosemide. This study has thus exemplified the use of DSC in understanding binary phase system where the two components form a cocrystal.     

Binding interaction and conformational changes of human serum albumin with ranitidine studied by spectroscopic and time-resolved fluorescence methods

This study was designed to examine the interaction of histamine H₂-receptor antagonist drug ranitidine (RTN) with human serum albumin by multi-spectroscopic methods. The experimental results showed the involvement of dynamic quenching mechanism which was further confirmed by lifetime spectral studies. The binding constants (K _a) at three temperatures (288, 298, and 308 K) were 2.058 ± 0.020, 4.160 ± 0.010 and 6.801 ± 0.011 × 10⁴ dm³ mol^?1, respectively, and the number of binding sites (m) were 1.169, respectively; thermodynamic parameters ΔH ⁰ (44.152 ± 0.047 kJ mol^?1), ΔG ⁰ (?26.214 ± 0.040 kJ mol^?1), and ΔS ⁰ (236.130 ± 0.025 J K^?1 mol^?1) were calculated. The distance r between donor and acceptor was obtained (r = 3.40 nm) according to the Förster theory of non-radiative energy transfer. Synchronous fluorescence, CD, AFM and 3D fluorescence spectral results revealed the changes in secondary structure of the protein upon interaction with RTN. A molecular modeling study further confirmed the binding mode obtained by the experimental studies.     

Load balancing via random local search in closed and open systems

In this paper, we analyze the performance of random load resampling and migration strategies in parallel server systems. Clients initially attach themselves to an arbitrary server, but may switch servers independently at random instants of time in an attempt to improve their service rate. This approach to load balancing contrasts with traditional approaches where clients make smart server selections upon arrival (e.g., Join-the-Shortest-Queue policy and variants thereof). Load resampling is particularly relevant in scenarios where clients cannot predict the load of a server before being actually attached to it. An important example is in wireless spectrum sharing where clients try to share a set of frequency bands in a distributed manner. We first analyze the natural Random Local Search (RLS) strategy. Under this strategy, after sampling a new server randomly, clients only switch to it if their service rate is improved. In closed systems, where the client population is fixed, we derive tight estimates of the time it takes under RLS strategy to balance the load across servers. We then study open systems where clients arrive according to a random process and leave the system upon service completion. In this scenario, we analyze how client migrations within the system interact with the system dynamics induced by client arrivals and departures. We compare the load-aware RLS strategy to a load-oblivious strategy in which clients just randomly switch server without accounting for the server loads. Surprisingly, we show that both load-oblivious and load-aware strategies stabilize the system whenever this is at all possible. We use large-system asymptotics to characterize system performance, and augment this with simulations, which suggest that the average client sojourn time under the load-oblivious strategy is not considerably reduced when clients apply smarter load-aware strategies.