Electrocatalytic activity of sol-gel-prepared RuO2/Ti anode in chlorine and oxygen evolution reactions

Electrocatalytic properties of RuO₂/Ti anode with different coating masses, which are prepared by the alkoxide sol-gel procedure, are investigated in chlorine and oxygen evolution reactions by polarization measurements and electrochemical impedance spectroscopy in H₂SO₄ and NaCl electrolytes. According to polarization measurements, the activity of anodes at overpotentials below 100 mV is independent of coating mass. However, impedance measurements above 100 mV reveal changes in the activity of anodes in chlorine evolution reaction for different coating masses. The diffusion limitations related to the evolved chlorine are registered in low-frequency domain at 1.10 V (SCE), diminishing with the increase in potential to the 1.15 V (SCE). The observed impedance behavior is discussed with respect to the activity model for activated titanium anodes in chlorine evolution reaction involving formation of gas channels within porous coating structure. Gas channels enhance the mass transfer rate similarly to the forced convection, which also increases the activity of anode. This is more pronounced for the anode of greater coating mass due to its more compact surface structure. The more compact structure appears to be beneficial for gas channels formation. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 10, pp. 1173–1179. The text was submitted by the authors in English.     

Two Hadamard matrices of order 956 of Goethals-Seidel type

No Hadamard matrices of order 956 appear in the literature. In this note we construct two such matrices. They are both of Goethals-Seidel type. As a consequence of this and of a result of Seberry and Yamada, we conclude that there exist 4-Williamson type matrices of order 1913.This work was supported by NSERC of Canada Grants A-5285 and EQP0107539.     

On the uniform (C, 1)-summability of Fourier series and integrability of series with respect to multiplicative orthonormal systems

H (G), f(g)H (G) , (, 1)- OHMC G. , OHMC, A. H. . , . , OHMC, lim supp _n=, , ,n .. . , 117 234 . . -      

A Safe Way of Performing Some Dangerous Experiments. II. Construction of a Safety Dropper

Due to the high safety risks, chemistry instructors avoid demonstrating many remarkable experiments based on the addition of a liquid to a solid. Well-known examples of such demonstrations are various pyrotechnic mixtures of potassium chlorate and sugar (sucrose), which are usually activated with a drop of concentrated sulfuric acid. Other attractive demonstrations are the addition of water to freshly prepared magnesium phosphide and addition of water to burning magnesium. In all of these demonstrations the reaction that takes place immediately is very vigorous and can be hazardous for the instructor. Because chemistry teachers and instructors usually try to avoid performing experiments that include a hazard, a number of highly attractive experiments may remain unknown to the public. Using a simple homemade device called a safety dropper, one can perform all of these experiments with complete safety, both for the audience and the demonstrator. Details for performing some of these experiments as well as for the construction of the safety dropper are given in this paper. Video clips of demonstrations are included as an aid for inexperienced instructors.     

Comparative thermal analysis of commercial and low-grade bauxites

This paper presents qualitative and quantitative comparative results on the simultaneous TG-DTG DTA of five commercial and low-grade bauxites. The methodology of qualitative determination of the basic mineral forms contained in bauxites is currently being established. The weight losses relating to the steps in the TG curve allow determination of the contents of the basic minerals in bauxite. These are recalculated as percentages of Al₂O₃, SiO₂, CaO moisture and total volatiles. The final results are in accordance with the results of classical chemical analyses, and this jusitifies the use of this technique as a quick method for qualitative and quantitative determinations of both commercial and low-grade bauxites.

---

Zusammenfassung Qualitative und quantitative Ergebnisse vergleichender simultaner TG-DTG-DTA-Untersuchungen an 5 kommerziellen und geringwertigen Bauxiten werden vorgestellt. Die Methodologie der qualitativen Bestimmung der wichtigsten im Bauxit enthaltenen Minerale wird ausgearbeitet. Die Gewichtsverluste bei den entsprechenden TG-Stufen erlauben die Berechnung der Gehalte an den wichtigsten Mineralen. Diese werden umgerechnet in die Anteile an Al₂O₃, SiO⁰², CaO, Feuchtigkeit und Glühverlust. Letztere Resultate stimmen mit denen klassisch-chemischer Analyse überein. Das erlaubt die Anwendung thermoanalytischer Methoden als Schnellverfahren für qualitative und quantitative Bestimmungen in kommerziellen und geringwertigen Bauxiten.

---

, . , . , , , . , , .

     

Calcium-strontium separation by means of mixed solvent anion exchange

The separation of strontium and yttrium from calcium on the anion exchanger column with alcohol solution of nitric acid as eluent may be described by Glueckauf's model of elution chromatography. Experimental and theoretical results have shown that this separation is characterized by a small number of theoretical plates of the separation column. This model may also be applied for the simulation of the separation of strontium and yttrium from calcium in the strontium isolation from natural samples. The model parameters may be used for the assessment of the optimum column dimension and the optimum working conditions for the isolation of radioactive strontium and yttrium from natural samples.     

Yellow pigments based on Fe2TiO5 and TiO2

The aim of our research was to prepare yellow pigments based on structure of pseudobrookite Fe₂TiO₅. Part of Fe was substituted with Li and Ti from Fe₂TiO₅ to Li_0.05Fe_0.07Ti_2.44O₅. Synthesis and pigmentary-application properties in the Li₂O–Fe₂O₃–TiO₂ system were studied for 800 and 900°C using classical ceramic method of preparation. The main attention was aimed to usage of four different sources of titanium compounds as raw materials. We studied the influence of different sources of titanium compounds on the structural and the colour properties of the prepared pigments. The thermal analysis was used for characterization of titanium compounds and determination of their thermal stability.     

Transition Metal Complexes with Pyrazole-based Ligands. Part 12. Characterisation and thermal decomposition of CuCl2 complexes with di- and trisubstituted pyrazoles

The synthesis of copper(II) chloride complexes with 3,5-dimethylpyrazole, 1-carboxamidine-3,5-dimethylpyrazole, 5-amino-4-carboxamide-1-phenylpyrazole and 4-acetyl-3-amino-5-methylpyrazole is described. The compounds are characterized by elemental analysis, FT-IR spectroscopy, thermal methods, magnetic moment and molar conductivity measurements. Thermal decomposition of the dichloro-(3,5-dimethylpyrazole)-copper(II) complex results in an unstable intermediate with a stochiometric composition. The decomposition of the other compounds is continuous. This revised version was published online in August 2006 with corrections to the Cover Date.