Novel flow injection-fluorometric method for the determination of trace silicate and its application to ultrapurified water analysis

A highly sensitive fluorescence quenching method for the determination of silicate based on the formation of an ion associate between molybdosilicate and Rhodamine B (RB) in nitric acid medium was developed. A flow injection system coupled with a fluorescence detector was used for the measurement of fluorescence intensity at 560 and 580 nm as excitation and emission wavelengths, respectively. The calibration graph for Si showed a linear range of 0.1–5 ng cm⁻³ with correlation coefficient of 0.9999, and the detection limit of 0.06 ng cm⁻³. The proposed method was successfully applied to the determination of silicate in ultrapurified water with satisfactory results.     

Acylation of hydrazides with acetic acid and formic acid

In peptide synthesis, hydrazides are important intermediates for the azide coupling method. A hydrazide is converted to the corresponding azide in the presence of an acid and a nitrite. When acetic acid (or formic acid) is used as the acid, partial acetylation (or formylation) of the hydrazide occurs as a side reaction. Formylation of the hydrazide is much faster than acetylation. Removal of the formyl group on the hydrazide with hydrazine and hydroxylamine was studied. The rate of deformylation with hydrazine treatment is faster than that with hydroxylamine treatment.     

Flow-injection spectrofluorometric determination of trace amounts of formaldehyde in water after derivatization with acetoacetanilide

A novel fluorophotometric method for formaldehyde determination in environmental waters was developed: the method does not require any enrichment procedures. A flow-injection analysis method for the spectrofluorometric determination of formaldehyde in waters, which is based on the reaction of formaldehyde with acetoacetanilide and ammonia, is proposed. The proposed method shows a good linearity from 0.50 to 40 × 10⁻⁷ M, and the limit of detection (LOD) of 3 × 10⁻⁹ M (0.09 ppb) is achievable. The sample throughput is 15 h⁻¹. One of the main advantages in the proposed method is that the reaction can be carried out at room temperature without any heating system. The effect of various interferences possibly present in the real water samples was investigated. Most cations and anions, as well as organic compounds, do not interfere with the determination of formaldehyde in environmental water samples. The proposed method is very simple, rapid, less expensive, and highly sensitive, and can be applied to the environmental water samples, such as rain, tap water and river water, at low concentration levels without any enrichment procedure.     

Functionalization of chitosan with 3-nitro-4-amino benzoic acid moiety and its application to the collection/concentration of molybdenum in environmental water samples

A chitosan resin functionalized with 3-nitro-4-amino benzoic acid moiety (CCTS-NABA resin) was newly synthesized for the collection/concentration of trace molybdenum by using cross-linked chitosan (CCTS) as base material. The carboxyl group of the moiety was chemically attached to amino group of cross-linked chitosan through amide bond formation. The adsorption behavior of molybdenum as well as other 60 elements on the resin was examined by passing the sample solutions through a mini-column packed with the resin. After the elution of the elements collected on the resin with 1 M HNO₃, the eluates were analyzed by inductively coupled plasma-mass spectrometry (ICP-MS) and atomic emission spectrometry (ICP-AES).

The CCTS-NABA resin can adsorb several metal ions, such as vanadium, gallium, arsenic, selenium, silver, bismuth, thorium, tungsten, tin, tellurium, copper, and molybdenum at appropriate pHs. Among these metal ions, only molybdenum could be adsorbed almost completely on the resin at acidic regions. An excellent selectivity toward molybdenum could be obtained at pH 3–4. The adsorption capacity of CCTS-NABA resin for Mo(VI) was 380 mg g⁻¹ resin. Through the column pretreatment, alkali and alkaline earth metals in river water and seawater samples were successfully removed.

The CCTS-NABA resin was applied to the adsorption/collection of molybdenum in river water and seawater samples. The concentrations of molybdenum in river water samples were found in the range of 0.84 and 0.95 ppb (ng g⁻¹), whereas molybdenum in seawater was about 9 ppb. The validation of the proposed method was carried out by determining molybdenum in the certified reference materials of SLRS-4, CASS-4, and NASS-5 after passing through the CCTS-NABA resin; the results showed good agreement with the certified values.     

On-line preconcentration using dual mini-columns for the speciation of chromium(III) and chromium(VI) and its application to water samples as studied by inductively coupled plasma-atomic emission spectrometry

On-line preconcentration system for the selective, sensitive and simultaneous determination of chromium species was investigated. Dual mini-columns containing chelating resin were utilized for the speciation and preconcentration of Cr(III) and Cr(VI) in water samples. In this system, Cr(III) was collected on first column packed with iminodiacetate resin. Cr(VI) in the effluent from the first column was reduced to Cr(III), which was collected on the second column packed with iminodiacetate resin. Hydroxyammonium chloride was examined as a potential reducing agent for Cr(VI) to Cr(III).The effects of pH, sample flow rate, column length, and interfering ions on the recoveries of Cr(III) were carefully studied. Five millilitres of a sample solution was introduced into the system. The collected species were then sequentially washed by 1 M ammonium acetate, eluted by 2 M nitric acid and measured by ICP-AES. The detection limit for Cr(III) and Cr(VI) was 0.08 and 0.15 μg l⁻¹, respectively. The total analysis time was about 9.4 min.The developed method was successfully applied to the speciation of chromium in river, tap water and wastewater samples with satisfied results.     

Speciation of arsenic(III) and arsenic(V) by inductively coupled plasma-atomic emission spectrometry coupled with preconcentration system

A novel and simple flow-based method was developed for the simultaneous determination of As(III) and As(V) in freshwater samples. Two miniature columns with a solid phase anion exchange resin, placed on two 6-way valves were utilized for the solid-phase collection/concentration of arsenic(III) and arsenic(V), respectively. As(III) could be retained on the column after its oxidation to As(V) species with an oxidizing agent. The collected analytes were then sequentially eluted by 2 M nitric acid and introduced into ICP-AES. Potassium permanganate was examined as potential oxidizing agent for conversion of As(III) to As(V). The standard deviation of the analytical signals (peak height) for the replicate analysis (n = 5) of 0.5 μg l⁻¹ solution were 3 and 5% for As(III) and As(V), respectively. The limit of detection (3σ) for both As(III) and As(V) were 0.1 μg l⁻¹. The proposed system produced satisfactory results on the application to the direct analysis of inorganic arsenic species in freshwater samples.     

Synthesis of novel chitosan resin derivatized with serine moiety for the column collection/concentration of uranium and the determination of uranium by ICP-MS

A chitosan resin derivatized with serine moiety (serine-type chitosan) was newly developed by using the cross-linked chitosan as a base material. The adsorption behavior of trace amounts of metal ions on the serine-type chitosan resin was systematically examined by packing it in a mini-column, passing a metal solution through it and measuring metal ions in the effluent by ICP-MS. The resin could adsorb a number of metal cations at pH from neutral to alkaline region, and several oxoanionic metals at acidic pH region by an anion exchange mechanism. Uranium and Cu could be adsorbed selectively at pH from acidic to alkaline region by a chelating mechanism; U could be adsorbed quantitatively even at pH 3–4. Uranium adsorbed on the resin was easily eluted with 1 M nitric acid: the preconcentration (5-, 10-, 50- and 100-fold) of U was possible. The column treatment method was used prior to the ICP-MS measurement of U in natural river, sea and tap waters; R.S.D. were 2.63, 1.13 and 1.37%, respectively. Uranium in tap water could be determined by 10-fold preconcentration: analytical result was 1.46±0.02 ppt. The resin also was applied to the recovery of U in sea water: the recovery tests for artificial and natural sea water were 97.1 and 93.0%, respectively.     

Carbamate mediated 1,3-asymmetric induction. A stereoselective synthesis of acyclic 1,3-diol systems

A highly regio- and stereo-selective functionalization of homoallylic carbamates with iodine is reported. The reaction has been applied to the preparation of key 1,3,5-triol intermediate $\text{2}$ employed in the synthesis of compactin ($\text{1}$).     

Crystal structures of V3S4 and V5S8

Crystal structures of the ordered phases of V₃S₄ and V₅S₈ were refined with single crystal data. Both are monoclinic. Chemical compositions, space groups and lattice constants are as follows: VS_1.47, $\text{I2}\text{m}$ (No. 12), a = 5.831(1), b = 3.267(1), c = 11.317(2)Å, β = 91.78(1)° and VS_1.64, $\text{F}\text{2}\text{m}$ (No. 12), a = 11.396(11), b = 6.645(7), c = 11.293(4), Å, β = 91.45(6)°. In both structures, short metal-metal bonds were found between the layers as well as within them. In comparison with the structure of Fe₇S₈, the stability of NiAs-type structure was discussed based on the detailed metal-sulfur distances.     

Isolation,chemical characterization and structure of ansamitocin,a new antitumor ansamycin antibiotic

In this paper we report the isolation, chemical characterization and structural elucidation of Ansamitocin, a new antitumor antibiotic obtained from Nocardia No. C-15003 (N-1). Ansamitocin P-3, P-3' and P-4 with molecular formulae C₃₂H₄₃ClN₂O₉, C₃₂H₄₃ClN₂O₉ and C₃₃H₄₅ClN₂O₉, respectively, were identified as novel antibiotics. Their UV spectra resemble that of maytansine obtained from a plant source. Analysis of the PMR spectrum and spin-decoup studies of P-3 demonstrated that its skeletal structure was the same as that of maytansine. Reductive cleavage of each antibiotic gave maytansinol (P-0). Alkali hydrolysis of P-3, P-3' and P-4 gave isobutyric, butyric and isovaleric acids, respectively. P-3, P-3' and P-4 were concluded to be the isobutyrate, butyrate and isovalerate ester of maytansinol at C-3, respectively. An antitumor plant product, maytanacine, and its semisynthetic derivative, maytansinol propionate, were also produced by the same strain.