Distributions of major-to-ultratrace elements among the particulate and dissolved fractions in natural water as studied by ICP-AES and ICP-MS after sequential fractionation.

In order to elucidate the distributions of the elements among the particulate and dissolved fractions in pond water, major-to-ultratrace elements in different sizes of particles as well as in the filtrate passed through the 0.05 microm filter were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). The different sizes of particle samples (ca. 100-300 microg each) were collected on the membrane filters with pore sizes of 10, 3.0, 1.2, 0.4, 0.2 and 0.05 microm, respectively, by sequential fractionation. As a result, about 40 elements in different sizes of particles could be determined by ICP-AES and ICP-MS, after acid digestion using HNO3/HF/HClO4. Then, the fractional distribution factors of major-to-ultratrace elements among the particulate and dissolved fractions were estimated from the analytical results. The total contents of Al, Fe, Ti, REEs (rare earth elements), Bi, Pb and Ag in the particulate fractions (larger than 0.05 microm) were more than 80-90%, while those of Ca, Sr, Cs, W, Ba, Mn and Co in the dissolved fraction, which corresponded to the filtrate passed through the 0.05 microm membrane filter, were more than 80%. It was further found that the fractional distributions of Cu and Zn in the dissolved fraction were ca. 50%. In addition, the enrichment factors (EFs) of the elements in the particulate fractions with particle sizes of 3.0-10 microm and 0.05-0.2 microm were estimated to elucidate their geochemical characteristics in natural water.     

New Plasmon Waveguides Composed of Twin Metal Wedges with a Nano Gap

We have numerically shown the existence of coupled wedge plasmons (CWPs) which propagates along a nano gap of a twin metal wedge. The CWPs are formed by wedge plasmons which can interact with each other. The dispersion relations of the wavenumber, propagation distance, and beam area of CWPs, are described and show that the characteristics of CWPs are similar to those of wedge plasmons and of gap plasmons. We also propose a new plasmon waveguide composed of twin metal wedges with a nano gap.     

Enhancement effect of iron addition for the decomposition of organic mercury as studied by continuous flow analysis with cold vapor atomic absorption spectrometric detection

Summary A continuous flow analysis is described for the determination of total mercury by cold vapor atomic absorption spectrometry. Organic mercury compounds such as methylmercury(II) chloride, ethylmercury(II) chloride and phenylmercury(II) chloride were decomposed by potassium peroxodisulphate with addition of ferric chloride as catalytic reagent. The reducing reagent used was tin(II) chloride in sodium hydroxide solution. With 1,000 mg Fe/l added in the decomposition process, we found that methylmercury(II) chloride and ethylmercury(II) chloride gave response signals similar to those of mercury(II) chloride. The proposed method was applied to the analysis of total mercury in waste water. Permanent address: Department of Chemistry, Faculty of Mathematics and Natural Sciences, Andalas University, Padang, West Sumatra, Indonesia     

Major-to-ultratrace elements in bone-marrow fluid as determined by ICP-AES and ICP-MS.

The major-to-ultratrace elements in human bone-marrow fluid were determined by ICP-AES (inductively coupled plasma atomic emission spectrometry), and ICP-MS (inductively coupled plasma mass spectrometry). The bone-marrow fluid sample was centrifuged prior to acid digestion to exclude the bone piece from bone marrow, and then digested with nitric acid. As a result, 20 elements could be determined over the concentration range from 1610 microg g(-1) for Na to 0.00043 microg g(-1) for W. It was found that Fe, Zn and Sb were enriched by ca. 264-, 7- and 15-fold, respectively, in bone-marrow fluid, compared to those in human blood serum. Alkali metals (K, Rb, Cs), except for Na, were also significantly enriched in bone-marrow fluid. Furthermore, the concentrations of various elements, such as Fe, P, Al, Zn, Cu, Se, Zr, Sn, Ag and W, were significantly higher than those in open seawater.     

Determination of rare earth elements in human blood serum by inductively coupled plasma mass spectrometry after chelating resin preconcentration

The determination of all rare earth elements (REEs) in human blood serum by inductively coupled plasma mass spectrometry (ICP-MS) was performed with the aid of chelating resin (Chelex 100) preconcentration after acid digestion with HNO3 and HClO4. When chelating resin preconcentration was carried out at room temperature, the recoveries of heavy REEs were lower than those of light REEs because of their stable complex formation with residual organic compounds remaining in the digested serum solution. These problems were overcome by heating the solution at 80 degrees C during the chelating resin preconcentration process. As a result, the recoveries for all REEs were improved to 92-102% in the case of a concentration factor of 4, where the analytical detection limits for REEs were below 0.2 x 10(-12) g ml-1. Consequently, all REEs in individual human blood sera collected from five healthy volunteers could be determined by ICP-MS with good precision. The concentrations of REEs in human blood serum were extremely low, in the range from ca. 1 x 10(-12) g ml-1 of Eu to ca. 230 x 10(-12) g ml-1 of Ce.     

A new strategy for construction of eight-membered carbocycles by Brook rearrangement mediated [6 + 2] annulation

[reaction: see text] A newly developed strategy for construction of eight-membered carbocycles via [6 + 2] annulation that involves the combination of beta-alkenoyl acylsilanes and a vinyllithium derivative is described. A unique feature of this annulative approach is that it enables in one operation and a stereoselective manner construction of eight-membered ring systems containing useful functionalities for further synthetic elaboration from readily available six- and two-carbon components.     

Gas chromatography of hydrocarbons using packed liquid chromatographic capillary columns

Capillary columns of 0.3-0.5 mm i.d. packed with 3- to 30-μm silica-based stationary phases for liquid chromatography were used for gas chromatographic separation of hydrocarbons. Column efficiencies were evaluated for various commercially available packing material. The best column efficiency was achieved with 5-μm octadecyl group bonded silica gel, the surface of which was coated with a poly (dimethylsiloxane) film. The 30-cm column produced 11,000 theoretical plates.     

Halide interferences in an electrothermal graphite furnace atomic absorption spectrometry with group IIIB elements as studied by atomic and molecular absorption signal profiles

Molecular absorptions of monohalides (MX; X = F, Cl and Br) of alkali metals, alkaline-earth metals and Group IIIB elements produced in a conventional electrothermal graphite furnace atomizer have been observed by a rapid measurement system. Their characteristic data are summarized as appearance and peak temperatures and the analytical sensitivities. Furthermore, molecular absorptions ofAlF and InF are utilized to study the interference of fluoride with aluminum and indium atomic absorptions. Although the formations of AlF and InF suppress the atomic absorptions ofAl and In, respectively, the time-overlap in signal appearance of atomic absorptions of these two elements and molecular absorptions of their monofluorides is not observed. This is contradictory to pure “vapor phase mechanism”, and indicates that processes occurring on the graphite surface are also important. Usefulness of strontium nitrate as a matrix modifier for the determination of indium was also demonstrated.