磺化聚苯醚离聚体的溶液性质

研究了磺化度为20.9mol％的磺化聚苯醚(S-PPO)的钠盐和锂盐在四氢呋喃/甲醇混合溶剂中的离聚体行为。S-PPO离聚体在溶液中的链聚集状态与聚合物浓度、阳离子半径密切相关。当Na-SPPO的浓度高于3g/dL时,在30～40℃范围内其聚集度DA与浓度C的关系为:DA=ke~(εc)常数K和β分别表示为与发现链聚集的起始浓度和链聚集速率相关的常数。     

Synthesis and light scattering study of microgels with interpenetrating polymer networks

Monodispersed microgels composed of poly(acrylic acid) (PAAc) and poly(N-isopropylacrylamide) (PNIPAM) interpenetrating polymer networks (IPN) were synthesized by a two-step method, first preparing PNIPAM microgel and then polymerizing acrylic acid that interpenetrates into the PNIPAM network. The growth kinetics of the IPN particle formation was obtained by measuring the turbidity and particle hydrodynamic radius (Rh) as a function of reaction time. IPN and PNIPAM microgels were characterized and compared by dynamic and static light scattering techniques. The concentrated aqueous solutions of the PNIPAM-PAAc IPN microgels exhibit an inverse thermoreversible gelation. In contrast to polymer solutions of poly(NIPAM-co-AAc) that have the inverse thermoreversible gelation, our system can self-assemble into an ordered structure, displaying bright colors. Furthermore, IPN microgels undergo the reversible volume phase transitions in response to both pH and temperature changes associated with PAAc and PNIPAM networks, respectively.     

功率对氘代辉光放电聚合物结构和力学性能的影响

采用射频辉光放电聚合技术,在低压等离子体聚合装置上开展在5~20 W功率下氘代辉光放电聚合物薄膜的制备及性能研究。利用傅里叶变换红外吸收光谱仪表征薄膜的化学结构,讨论了功率变化对其官能团结构的影响规律。利用元素分析仪和纳米压痕仪表征薄膜中氘原子的相对含量和薄膜的力学性能。研究表明:随着功率的升高,薄膜中的氘含量先升高后降低,在10W时达到最大,薄膜中SP3 CD的相对含量增加,SP3 CD2的相对含量减小;聚合物薄膜的硬度和杨氏模量均随功率的增加而减小。     

Microstructure, distribution and properties of conductive polypyrrole/cellulose fiber composites

Highly intrinsic conductive polypyrrole/cellulose fiber composites (CF) were successfully prepared through in situ chemical oxidation polymerization simply by increasing fiber concentration at the same dosage of pyrrole, oxidant and dopant (based on the weight of dry fiber). FeCl₃ and anthraquinone-2-sulfonic acid sodium salt (AQSNa) were utilized as oxidant and dopant. As fiber concentration increased from 1 % (CF1) to 20 % (CF20), N and S content increased from 0.24 and 0.25 % to 1.24 and 0.89 %, and great increase in the retention of PPy and AQSNa was confirmed by elemental analysis. In addition, on the surface of conductive fiber, PPy of compact fibroid structure was detected instead of interconnected globular structure at higher fiber concentration. Furthermore, scanning transmission electron microscope and X-ray photoelectron spectroscopy (XPS)-depth profile analysis demonstrated denser and more uniformly distributed PPy inside fiber wall for CF20, while PPy tended to deposit on the surface of fiber for CF1. Fourier transform infrared spectroscopy, together with XPS certified that the PPy with longer conjugation length and higher doping level across the conductive fiber was obtained at higher fiber concentration. The doping level for CF10 decreased from 21.55 to 16.39 % with increasing fiber wall thickness, while that of CF20 decreased slightly from 30.73 to 24.10 %. The resulting CF20 showed lowest surface resistivity of 0.433 KΩ/square, as well as improved electro-conductivity stability. The incorporation of more PPy in CF improved the thermal stability.     

基于雨课堂和BOPPPS改进模型的教学设计——以大学化学课程为例

在高等学校专业课程教学中融入思政教育教学的理念,是以"立德树人"为教育根本任务的基本要求。结合结构化学课程特点和教学内容,以"培养学生的哲学观和科学观、培养学生民族自豪感和自信心"的目标为切入点,提出结构化学教学中思政元素的融入策略,发挥结构化学课程的"育德功能",实现知识传授和价值引领的有机统一。     

Modular Synthesis of Nona‐Decasaccharide Motif from Psidium guajava Polysaccharides: Orthogonal One‐Pot Glycosylation Strategy

The synthesis of long, branched, and complex carbohydrate sequences remains a challenging task in chemical synthesis. Reported here is an efficient and modular one‐pot synthesis of a nona‐decasaccharide and shorter sequences from Psidium guajava polysaccharides, which have the potent α‐glucosidase inhibitory activity. The synthetic strategy features: 1) several one‐pot glycosylation reactions on the basis of N‐phenyltrifluoroacetimidate (PTFAI) and Yu glycosylation to streamline the chemical synthesis of oligosaccharides, 2) the successful and efficient assembly sequences (first O3′, second O5′, final O2′) toward the challenging 2,3,5‐branched Araf motif, 3) the stereoselective 1,2‐cis‐glucosylation by reagent control, and 4) the convergent [6+6+7] one‐pot coupling reaction for the final assembly of the target nona‐decasaccharide. This orthogonal one‐pot glycosylation strategy can streamline the chemical synthesis of long, branched, and complicated carbohydrate chains.     

碳气凝胶及活化碳气凝胶电极材料制备与性能

 以间苯二酚(R)-甲醛(F)为原料,制备了有机气凝胶和碳气凝胶,并对其进行二氧化碳活化。X射线衍射(XRD)测试表明,二氧化碳渗入到碳气凝胶网络结构发生反应,造成(002)峰和(100)峰减弱;扫描电子显微镜(SEM)测试表明,活化没有破坏碳气凝胶的骨架结构,而是增加了大量的nm尺度微孔,从而大大提高了碳气凝胶的比表面积和微孔比例。在1 mol/L KOH电解液中进行了循环伏安和计时电位扫描测试,电极材料电化学性能稳定,具有较好的可逆性,在1 mA/s电流密度下进行充放电测试,得到活化前电极比电容为103 F/g,活化后由于比表面积的增加,比电容达到371 F/g,是一种理想的电化学电极材料。     

Strain-rate frequency superposition: a rheological probe of structural relaxation in soft materials

The rheological properties of soft materials often exhibit surprisingly universal linear and nonlinear features. Here we show that these properties can be unified by considering the effect of the strain-rate amplitude on the structural relaxation of the material. We present a new form of oscillatory rheology, strain-rate frequency superposition (SRFS), where the strain-rate amplitude is fixed as the frequency is varied. We show that SRFS can isolate the response due to structural relaxation, even when it occurs at frequencies too low to be accessible with standard techniques.     

板材冲压成形有限元数值模拟界面摩擦约束处理方法

基于弹塑性大变形板材冲压成形增量有限元法,采用线性弹簧单元提出一种空间三维板材冲压成形等效界面摩擦力的处理方法.这种方法的优点是可以反映界面摩擦力的同步、被动产生效果,同时它还可以保证约束后刚度矩阵的对称性.将提出的摩擦约束处理算法引入自主开发的板材成形模拟软件FASTAMP,计算了汽车油底壳的成形过程,计算结果的厚度分布与实际冲压件吻合比较好,验证了等效界面摩擦力约束处理方法的有效性.