Influence of the H/F replacement on the homoaromaticity of homotropylium ion: a GIAO/DFT theoretical study

The problem of homoaromaticity in mono-, di- and polyfluorinated- homotropylium cations is addressed by the B3LYP/6-311++G** DFT method. The energetic, structural and magnetic criteria are used for this purpose. They convincingly show that the ground state equilibrium species are aromatic, or in other words that the homoaromaticity is preserved by the (poly)fluorination. In contrast, a considerable decrease in the aromatic stabilization is observed in the transition structures (TS). According to the NICS(0) index, they vary form strongly antiaromatic, via weakly and non-aromatic to slightly aromatic transition states. However, the hierarchy of the aromaticity in fluorinated homotropylium ions predicted by NICS(0) is completely unrelated to that obtained by using the energy criterion assuming a kinetic definition of aromaticity. On the other hand the latter is closely related to geometric parameters of the equilibrium and transition structures.     

Elektrophorese der halogenokomplexe von hg(ii), bi(iii), cd(ii), pb(ii) und cu(ii) : Chloro-, bromo- und jodokomplexe in kcl,hcl,kbr,hbr und kj

The electrophoretic mobilities of chloro-, bromo- and iodo-complexes of Hg, Bi, Cd, Pb, and Cu, obtained by heavy current electrophoresis on filter paper, are presented in diagrams as a function of the logarithm of the concentrations of the halogen ions KC1, HCl, KUr, HBr and KJ, mainly in concentrations between 0.1N and 4N, were selected as complexing agents Straight lines were obtuned with characteristic slopes, breaks and parallelisms. Furthermore it can be seen from the diagiarns, that the tendency to form complexes increases on the one hand in the sequence chloro - bromo -iodo, and on the other for the chloro- and bromo-complexes in the sequence Cu - Pb - Cd - Bi -Hg In the case of the lodo-complexes the sequence is (Pb + Cd) - Hg - Cu.Figures that show the electrophoretie scpartion of a mixture of Hg - Bi - Cd - Pb - Cu in Voirious concentrations of KC1, KBr and HBr, are given. The separation of these metals in the form of halogeno-complexes can be most satisfactorily accomplished in 0.5_N KBr or 0.5NHBr.     

Gas-phase structure of protonated histidine and histidine methyl ester: combined experimental mass spectrometry and theoretical ab initio study

Gas-phase H/D exchange experiments with CD3OD and D2O and quantum chemical ab initio G3(MP2) calculations were carried out on protonated histidine and protonated histidine methyl ester in order to elucidate their bonding and structure. The H/D exchange experiments show that both ions have three equivalent fast hydrogens and one appreciably slower exchangeable hydrogen assigned to the protonated amino group participating in a strong intramolecular hydrogen bond (IHB) with the nearest N(sp2) nitrogen of the imidazole fragment and to the distal ring NH-group, respectively. It is taken for granted that the proton exchange in the IHB is much faster than the H/D exchange. Unlike in other protonated amino acids (glycine, proline, phenylalanine, tyrosine, and tryptophan) studied earlier, the exchange rate of the carboxyl group in protonated histidine is slower than that of the amino group. The most stable conformers and the enthalpies of neutral and protonated histidine and its methyl ester are calculated at the G3(MP2) level of theory. It is shown that strong intramolecular hydrogen bonding between the amino group and the imidazole ring nitrogen sites is responsible for the stability and specific properties of the protonated histidine. It is found that the proton fluctuates between the amino and imidazole groups in the protonated form across an almost vanishing barrier. Proton affinity (PA) of histidine calculated by the G3(MP2) method is 233.2 and 232.4 kcal mol(-1) for protonation at the imidazole ring and at the amino group nitrogens, respectively, which is about 3-5 kcal mol(-1) lower than the reported experimental value.     

Determination of chloride by stripping chronopotentiometry with silver-film electrode

The experimental parameters of cathodic stripping chronopotentiometry of chloride at a silver-film electrode are investigated and optimized. The chloride preconcentration is achieved in the form of silver chloride by a controlled potential oxidation of the working electrode under vigorous stirring. Cathodic stripping of the deposit is obtained by the constant current, under the condition of diffusive mass transfer. Deaeration of the solution is not necessary. A detection limit of 35 μ dm⁻³ (10⁻⁶ mol dm⁻³) is obtained at a deposition time of 180 s, with a reproducibility of 6.7 % (expressed as relative standard deviation, RSD).     

1,8-bis(dimethylethyleneguanidino)naphthalene: tailoring the basicity of bisguanidine "proton sponges" by experiment and theory

1,8-bis(dimethylethyleneguanidino)naphthalene (DMEGN), the second example of a peralkyl guanidine "proton sponge" based on the 1,8-naphthalene backbone, was prepared and fully characterized. The crystal structure analysis of monoprotonated DMEGN reveals an unsymmetrical intramolecular hydrogen bridge. A decrease in the basicity with respect to the noncyclic parent 1,8-bis(tetramethylguanidino)naphthalene was found. Nevertheless, a new proton sponge provides a new crossbar in the ladder of highly basic neutral organic compounds. A detailed theoretical study of DMEGN and related cyclic guanidines explains this surprising experimental result. Homodesmotic reactions reveal that the intramolecular hydrogen bond contributes effectively 10 kcal/mol to proton affinity of DMEGN.     

Donor–acceptor complexes in copolymerization. XLIII. Cyclization of alternating and random styrene–(meth)acrylic ester copolymers

Equimolar alternating copolymers of styrene and methyl methacrylate (prepared with Et_1.5AlCl_1.5, SnCl₄, and ZnCl₂) as well as equimolar random copolymer were treated with polyphosphoric acid at 135°C. The extent of cyclization of the alternating copolymers was about 40%, independent of the cotacticity of the copolymer, and there was little or no crosslinking. The random copolymer underwent only 10% cyclization and considerable crosslinking. The extent of cyclization of the alternating copolymer of styrene and methyl acrylate (prepared with Et_1.5AlCl_1.5) was the same as that of the random copolymer and was lower than that of the corresponding methyl methacrylate copolymer. Both alternating and random copolymers underwent extensive crosslinking.     

On the bond-stretch isomerism in the benzo[1,2:4,5]dicyclobutadiene system--an ab initio MR-AQCC study.

Bond-stretch isomerism in benzo[1,2:4,5]dicyclobutadienle (BDCB) has been investigated using the MR-AQCC/6-31G(d) method, a high-level multireference ab initio approach including size-extensivity corrections. The applied theoretical approach includes both nondynamical and dynamical electron correlation effects. Full MR-AQCC geometry optimizations of localized (1) and delocalized (3) isomers as well as the transition structure (TS) have been determined using D2h, symmetry restriction. The calculations show that both isomers are approximately of equal stability separated by a barrier with a height of about 5 kcal mol(-1). Thus, the present results strongly indicate that benzof[1,3:4,5]dicyclobutadiene is a very good candidate for an organic compound exhibiting bond-stretch isomerism, since isomers 1 and 3 correspond to true minima on the double-well potential energy surface, which are separated by a sufficiently high barrier. It is particularly important to emphasize that isomer 3 represents a realization of the highly elusive quasi-[10]annulene.     

Additivity of the proton affinity of polysubstituted benzenes: the ipso position

It is shown, by the MP2(fc)/6-31G^{* *}/ /HF/6-31G^* +ZPE(HF/6-31G^*) theoretical model and concomitant use of homodesmic reactions, that the ipso proton affinities in polyfluorinated benzenes follow a simple additivity rule. Performance of the latter is good, as evidenced by a low average absolute deviation Δ_abs = 0.8 kcal/mol from the accurate ab initio results. Additional evidence supporting the additivity concept is provided by good accordance with the experimental proton affinity (PA) for perfluorobenzene. The present approach enables estimates of the ipso PAs of multiply substituted aromatics. It is particularly useful in those systems which involve or atomic groupings with lone pairs of electrons proximate to the aromatic π moiety. The additivity rule of thumb offers a simple rationalization of the ipso proton affinities. The origin of the PA additivity is briefly discussed.     

Design and construction of an quasi-adiabatic dissolution calorimeter with a novel dosing apparatus and a low heat capacity

A quasi-adiabatic calorimeter for determining the molar solution enthalpies (Δ_sol H) of non-volatile solids was constructed. The design of the instrument was adjusted to allow the determination of solution enthalpies of small amounts of solids. For that purpose, the novel apparatus for sample dosage with virtually negligible “blank heat” was built. The rather low heat capacity of the calorimeter was achieved by reducing the volume of the reaction cell (20 mL), the dosing unit, and electric elements (the thermistor and the heater). Good thermal isolation of the reaction cell from the surroundings was accomplished by placing the cell into an evacuated polypropylene vessel. A computer program for processing the calorimetric data according to modified Regnault–Pfaundler method was written. The performance of the calorimeter was tested by determining the heats of the reactions serving as thermochemical standards at 25 °C (the dissolution of KCl and NaCl in water and the dissolution of tris(hydroxymethyl)-aminomethane in 0.1 mol dm^?3 HCl(aq)). The obtained data were in very good agreement with the literature values.