A novel sequential aminodiene Diels-Alder strategy for the rapid construction of substituted analogues of Kornfeld's ketone

Through a novel sequence of aminodiene Diels-Alder reactions, amidofurans 18a-c were converted to tricyclic ketones 21a-c in moderate to good yields. Ketone 21a could be converted to Uhlé's ketone (6) by cleaving the tert-butyl carbamate and oxidatively removing the methyl ester. Tricycle 21a readily underwent bromination to give 22. Formation of the corresponding enol triflate 25 followed by carbonylation gave ester 27, which was then coupled with N-methyl propriolamide to furnish 26. [reaction: see text]     

Phase Equilibria in the Ni–Al–W System at 900°C

Multicomponent Ni-base alloys exhibit good mechanical properties even at elevated temperatures and they are widely used for industrial production of exertion-resistive parts of engines. These properties are mainly determined by the coexistence of a disordered γ matrix with a face centred cubic lattice and cuboidal domains of its ordered γ′ structure. Therefore it is useful to study phase equilibria in Ni-base systems, namely in the regions involving both mentioned phases. One of the conclusions of our recent work on Ni–Al–Cr–W system was a necessity of modification of selected thermodynamic parameters of the ternary Ni–Al–W subsystem in order to achieve a better agreement of our experimental observations with theoretical modelling. This involves new measurements of the microstructure of selected samples of the Ni–Al–W system at 900°C and the comparison of the results with existing literature data in order to confirm our conclusions on higher order system investigated before. It is a first step on the way to an assessment of the Ni–Al–W system, which has not been done before.     

Conformational Analysis of 1,2:3,4-Diepoxides: Ab Initio and semiempirical molecular-orbital calculations

Using semiempirical and ab initio procedures, the most stable conformations of meso- and rac-bioxirane and of some substituted 1,2:3,4-diepoxides were calculated. For threo-diepoxides (having the same relative configurations as rac-bioxirane, 3 ), two stable conformations with CCCC dihedral angles of ca. 90 and ca. 270° were found. For erythro-diepoxides (derivatives of meso-bioxirane, 4 ) the calculations suggest three preferred conformations with corresponding dihedral CCCC angles of ca. 90°, ca. 180°, and ca. 270°. The calculations are in fair agreement with the experimental data available for the unsubstituted compounds 3 and 4 .     

Development of a New Class of Inhibitors for the Malarial Aspartic Protease Plasmepsin II Based on a Central 7‐Azabicyclo[2.2.1]heptane Scaffold

Plasmepsin II (PMII), a malarial aspartic protease involved in the catabolism of hemoglobin in parasites of the genus Plasmodium, and renin, a human aspartic protease, share 35% sequence identity in their mature chains. Structures of 4‐arylpiperidine inhibitors complexed to human renin were reported by Roche recently. The major conformational changes, compared to a structure of renin, with a peptidomimetic inhibitor were identified and subsequently modeled in a structure of PMII (Fig. 1). This distorted structure of PMII served as active‐site model for a novel class of PMII inhibitors, according to a structure‐based de novo design approach (Fig. 2). These newly designed inhibitors feature a rigid 7‐azabicyclo[2.2.1]heptane scaffold, which, in its protonated form, is assumed to undergo ionic H‐bonding with the two catalytic Asp residues at the active site of PMII. Two substituents depart from the scaffold for occupancy of either the S1/S3 or S2′‐pocket and the hydrophobic flap pocket, newly created by the conformational changes in PMII. The inhibitors synthesized starting from N‐Boc‐protected 7‐azabicyclo[2.2.1]hept‐2‐ene ( 6 ; Schemes 1–5) displayed up to single‐digit micromolar activity (IC₅₀ values) toward PMII and good selectivity towards renin. The clear structure? activity relationship (SAR; Table) provides strong validation of the proposed conformational changes in PMII and the occupancy of the resulting hydrophobic flap pocket by our new inhibitors.     

A New Class of Inhibitors for the Malarial Aspartic Protease Plasmepsin II Based on a Central 11‐Azatricyclo[6.2.1.02,7]undeca‐2,4,6‐triene Scaffold

A new class of nonpeptidic inhibitors of the malarial aspartic protease plasmepsin II (PMII) with up to single‐digit micromolar activities (IC₅₀ values) was developed by structure‐based de novo design. The active‐site matrix used in the design was based on an X‐ray crystal structure of PMII, onto which the major conformational changes seen in the structure of renin upon complexation of 4‐arylpiperidines – including the unlocking of a new hydrophobic (flap) pocket – were modeled. The sequence identity of 35% between mature renin and PMII had prompted us to hypothesize that an induced‐fit adaptation around the active site as observed in renin might also be effective in PMII. The new inhibitors contain a central 11‐azatricyclo[6.2.1.0^2,7]undeca‐2(7),3,5‐triene core, which, in protonated form, undergoes ionic H‐bonding with the two catalytic Asp residues at the active site of PMII (Figs. 1 and 2). This tricyclic scaffold is readily prepared by a Diels? Alder reaction between an activated pyrrole and a benzyne species generated in situ (Scheme 1). Two substituents with naphthyl or 1,3‐benzothiazole moieties are attached to the central core (Schemes 1–4) for accommodation in the hydrophobic flap and S1/S3 (or S2′, depending on the optical antipode of the inhibitor) pockets at the active site of the enzyme. The most‐potent inhibitors (±)‐ 19a – 19c (IC₅₀ 3–5 μM ) and (±)‐ 23b (2 μM ) (Table) bear an additional Cl‐atom on the 1,3‐benzothiazole moiety to fully fill the rear of the flap pocket. Optimization of the linker between the tricyclic scaffold and the 1,3‐benzothiazole moiety, based on detailed conformational analysis (Figs. 3 and 4), led to a further small increase in inhibitory strength. The new compounds were also tested against other aspartic proteases. They were found to be quite selective against renin, while the selectivity against cathepsin D and E, two other human aspartic proteases, is rather poor (Table). The detailed SARs established in this investigation provide a valuable basis for the design of the next generations of more‐potent and ‐selective PMII inhibitors with potential application in a new antimalarial therapy.     

Structure de la gouregine,alcaloïde orginal apparente aux cularines

The structure of guoregine, a new isoquinoline alkaloid from $\text{G}$$\text{u}$$\text{a}$$\text{t}$$\text{t}$$\text{e}$$\text{r}$$\text{i}$$\text{a}$$\text{o}$$\text{u}$$\text{r}$$\text{e}$$\text{g}$$\text{o}$$\text{u}$, Annonaceae, has been deduced by spectral analysis and confirmed by an X-ray structure determination. It is the first member of a new class of cularine-related alkaloids (α-$\text{g}$$\text{e}$$\text{m}$-dimetyltetradehydrocularines).     

Investigation of the reaction mechanism and kinetics of production of anhydrous sodium metaborate (NaBO2) by a solid-state reaction

In this study, the solid-state reaction mechanism and kinetics were investigated for production of anhydrous sodium metaborate (NaBO₂), an industrially and technologically important boron compound. To assess the kinetics of solid-state production of NaBO₂, the chemical reaction between borax (Na₂B₄O₇) and sodium hydroxide (NaOH) was investigated by use of the thermal analysis techniques thermogravimetry (TG) and differential thermal analysis (DTA). DTA curves obtained under non-isothermal conditions at different heating rates (5, 10 and 20 °C/min), revealed five endothermic peaks corresponding to five solid-state reactions occurring at 70, 130, 295, 463, and 595 °C. The stages of the solid-state reaction used for production NaBO₂ were also analyzed by XRD, which showed that at 70 and 130 °C, Na₂B₄O₇ and NaOH particles contacted between the grains, and diffusion was initiated at the interface. However, there was not yet any observable formation of NaBO₂. Formation of NaBO₂ was initiated and sustained from 295 to 463 °C, and then completed at 595 °C; the product was anhydrous NaBO₂. Activation energies (E _a) of the solid-state reactions were calculated from the weight loss based on the Arrhenius model; it was found that in the initial stages of the solid-state reaction E _a values were lower than in the last three steps.     

Role of reaction atmosphere in preparation of potassium tantalate through sol–gel method

Potassium tantalate (KT) thin films and powders of both K₂Ta₂O₆ (KT pyrochlore) and KTaO₃ (KT perovskite) structures were prepared by means of chemical solution deposition method using Si(111) with ZnO and MgO buffer layers as a substrate. The influence of reaction atmosphere on reaction pathway and phase composition for both KT powders, and KT thin films has been studied mainly by means of powder diffraction and infrared spectroscopy. When an oxygen flow instead of static air atmosphere has been used the process of pyrolysis in oxygen runs over much narrower temperature interval (200–300 °C), relatively to air atmosphere (200–600 °C) and almost no (in case of powders), or no (in case of thin films) pyrochlore intermediate phase has been detected in comparison with treatment in air, where the pyrochlore phase is stable at temperatures 500–600 °C (powders). KT perovskite phase starts to crystallize at temperatures 50° and 150 °C lower compared to air atmosphere in case of powders and thin films, respectively. Microstructure formed by near-columnar grains and small grains of equiaxed shape was observed in films treated in oxygen and air atmosphere, respectively.     

Characterization of glycosyl inositol phosphoryl ceramides from plants and fungi by mass spectrometry

Although glycosyl inositol phosphoryl ceramides (GIPCs) represent the most abundant class of sphingolipids in plants, they still remain poorly characterized in terms of structure and biodiversity. More than 50 years after their discovery, little is known about their subcellular distribution and their exact roles in membrane structure and biological functions. This review is focused on extraction and characterization methods of GIPCs occurring in plants and fungi. Global methods for characterizing ceramide moieties of GIPCs revealed the structures of long-chain bases (LCBs) and fatty acids (FAs): LCBs are dominated by tri-hydroxylated molecules such as monounsaturated and saturated phytosphingosine (t18:1 and t18:0, respectively) in plants and mainly phytosphingosine (t18:0 and t20:0) in fungi; FA are generally 14–26 carbon atoms long in plants and 16–26 carbon atoms long in fungi, these chains being often hydroxylated in position 2. Mass spectrometry plays a pivotal role in the assessment of GIPC diversity and the characterization of their structures. Indeed, it allowed to determine that the core structure of GIPC polar heads in plants is Hex(R1)-HexA-IPC, with R1 being a hydroxyl, an amine, or a N-acetylamine group, whereas the core structure in fungi is Man-IPC. Notably, information gained from tandem mass spectrometry spectra was most useful to describe the huge variety of structures encountered in plants and fungi and reveal GIPCs with yet uncharacterized polar head structures, such as hexose–inositol phosphoceramide in Chondracanthus acicularis and (hexuronic acid)₄–inositol phosphoceramide and hexose–(hexuronic acid)₃–inositol phosphoceramide in Ulva lactuca.