Separation of carbon nanotubes by frit inlet asymmetrical flow field-flow fractionation

Flow field-flow fractionation (flow FFF), a separation technique for particles and macromolecules, has been used to separate carbon nanotubes (CNT). The carbon nanotube ropes that were purified from a raw carbon nanotube mixture by acidic reflux followed by cross-flow filtration using a hollow fiber module were cut into shorter lengths by sonication under a concentrated acid mixture. The cut carbon nanotubes were separated by using a modified flow FFF channel system, frit inlet asymmetrical flow FFF (FI AFIFFF) channel, which was useful in the continuous flow operation during injection and separation. Carbon nanotubes, before and after the cutting process, were clearly distinguished by their retention profiles. The narrow volume fractions of CNT collected during flow FFF runs were confirmed by field emission scanning electron microscopy and Raman spectroscopy. Experimentally, it was found that retention of carbon nanotubes in flow FFF was dependent on the use of surfactant for CNT dispersion and for the carrier solution in flow FFF. In this work, the use of flow FFF for the size differentiation of carbon nanotubes in the process of preparation or purification was demonstrated.     

Syntheses and characterization of carbazole based new low‐band gap copolymers containing highly soluble benzimidazole derivatives for solar cell application

Newly designed 2H‐benzimidazole derivatives which have solubility groups at 2‐position have been synthesized and incorporated into two highly soluble carbazole based alternating copolymers, poly[2,7‐(9‐(1′‐octylnonyl)‐9H‐carbazole)‐alt‐5,5‐(4′,7′‐di(thien‐2‐yl)‐2H‐benzimidazole‐2′‐spirocyclohexane)] (PCDTCHBI) and poly[2,7‐(9‐(1′‐octylnonyl)‐9H‐carbazole)‐alt‐5,5‐(4′,7′‐di(thien‐2‐yl)‐2H‐benzimidazole‐2′‐spiro‐4′′‐((2′′′‐ethylhexyl)oxy)‐cyclohexane)] (PCDTEHOCHBI) for photovoltaic application. These alternating copolymers show low‐band gap properties caused by internal charge transfer from an electron‐rich unit to an electron‐deficient moiety. HOMO and LUMO levels are –5.53 and –3.86 eV for PCDTCHBI, and –5.49 and –3.84 eV for PCDTEHOCHBI, respectively. Optical band gaps of PCDTCHBI and PCDTEHOCHBI are 1.67 and 1.65 eV, respectively. The new carbazole based the 2H‐benzimidazole polymers show 0.11–0.13 eV lower values of band gaps as compared to that of carbazole based benzothiadiazole polymer, poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] (PCDTBT), while keeping nearly the same deep HOMO levels. The power conversion efficiencies of PCDTCHBI and PCDTEHOCHBI blended with [6,6]phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) are 1.03 and 1.15%, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Plasma-enhanced atomic layer deposition of Co using Co(MeCp)2 precursor

Cobalt (Co) thermal or plasma enhanced atomic layer deposition (PE-ALD) was investigated using a novel metal organic precursor, Co(MeCp)₂, and NH₃ or H₂ or their plasma as a reactant. The growth characteristics, electrical and microstructural properties were investigated. Especially, PE-ALD produced Co thin films at low growth temperature down to 100 °C. Interestingly, the low temperature growth of Co films showed the formation of columnar structure at substrate temperature below 300 °C. The growth characteristics and films properties of PE-ALD Co using bis(η-methylcyclopentadienyl) Co(II) (Co(MeCp)₂) was compared with those of PE-ALD Co using other Cp based metal organic precursors, bis-cyclopentadienyl cobalt (II) (CoCp₂) and cyclopentadienyl isopropyl acetamidinato-cobalt (Co(CpAMD)).     

Advanced form-finding for cable-strut structures

A numerical method is presented for form-finding of cable-strut structures. The topology and the types of members are the only information that is required in this form-finding process. Dummy members are used to transform the cable-strut structure with supports into self-stressed system without supports. The requirement on rank deficiencies of the force density and equilibrium matrices for the purpose of obtaining a non-degenerate d-dimensional self-stressed structure has been explicitly discussed. The spectral decomposition of the force density matrix and the singular value decomposition of the equilibrium matrix are performed iteratively to find the feasible sets of nodal coordinates and force densities which satisfy the minimum required rank deficiencies of the force density and equilibrium matrices, respectively. Based on numerical examples it is found that the proposed method is very efficient, robust and versatile in searching self-equilibrium configurations of cable-strut structures.     

Isogeometric cable elements based on B-spline curves

Meccanica - In this paper, the isogeometric cable elements based on B-spline curves are developed for the static analysis of cable structures under conservative static loads. For this, the...     

Stability for Leipholz's Type of Laminated Box Columns with Nonsymmetric Lay-Ups on Elastic Foundation

The stability behavior of the Leipholz's type of laminated box columns with nonsymmetric lay-ups resting on elastic foundation is investigated using the finite element method. Based on the kinematic assumptions consistent with the Vlasov beam theory, a formal engineering approach of the mechanics of the laminated box columns with symmetric and nonsymmetric lay-ups is presented. The extended Hamilton's principle is employed to obtain the elastic stiffness and mass matrices, the Rayleigh damping and elastic foundation matrices, the geometric stiffness matrix due to distributed axial force, and the load correction stiffness matrix accounting for the uniformly distributed nonconservative forces. The evaluation procedures for the critical values of divergence and flutter loads with/without internal and external damping effects are briefly presented. Numerical examples are carried out to validate the present theory with respect to the previously published results. Especially, the influences of the fiber angle change and damping on the divergence and flutter loads of the laminated box columns are parametrically investigated.