Determination of 5-nitroindazole using silver solid amalgam electrode

Monatshefte für Chemie - Chemical Monthly - The voltammetric behavior of 5-nitroindazole was investigated at polished (p-AgSAE) and at mercury meniscus-modified (m-AgSAE) silver solid amalgam...     

Eigenmobilities in background electrolytes for capillary zone electrophoresis: III. Linear theory of electromigration

A mathematical model of capillary zone electrophoresis (CZE) based on the conception of eigenmobilities, which are the eigenvalues of a matrix M tied to the linearized governing equations is presented. The model considers CZE systems, where constituents, either analytes or components of the background electrolyte (BGE), are weak electrolytes--acids, bases, or ampholytes. There is no restriction on the number of components nor on the valence of the constituents nor on pH of the BGE. An electrophoretic system with N constituents has N eigenmobilities. In most BGEs one or two eigenmobilities are very close to zero so their corresponding eigenzones move very slowly. However, there are BGEs where no eigenmobility is close to zero. The mathematical model further provides: the transfer ratio, the molar conductivity detection response, and the relative velocity slope. This allows the assessment of the indirect detection, conductivity detection and peak broadening (distortion) due to electromigration dispersion. Also, we present a spectral decomposition of the matrix M to matrices allowing the assessment of the amplitudes of system eigenpeaks (system peaks). Our model predicted the existence of BGEs having no stationary injection zone (or water zone, gap, peak, dip). A common practice of using the injection zone as a marker of the electroosmotic flow must fail in such electrolytes.     

Ion-chromatographic separation of metal cations in the presence of a-hydroxyisobutyric acid

Separations of metal cations on a column packed with the strongly acidic cation exchanger Separon SGX CX were investigated in the presence of -hydroxyisobutyric acid (HIBA) in the mobile phase. A retention model based on the general theory of side equilibria was elaborated and relations describing dependences of capacity factors of analytes on the compositon of the mobile phase were derived. Effects of HIBA concentration and pH of the mobile phase on the analyte retention were studied in detail. Stability constants of divalent metal cations (Cd²⁺, Co²⁺, Mn²⁺, Ni²⁺ and Zn²⁺) with HIBA were calculated from the experimental dependences of the reciprocal values of capacity factors on the ligand concentration.     

Organopolysiloxanes as Chemically Sensitive Coatings for Optical Fibers

Various types of UV-curable organically modified siloxanes have been synthesized by the sol-gel method with the aim of fabricating chemically sensitive coatings for silica optical fibers. The refractive index of the coating material can be tailored in the range from 1.46 to 1.56 and sensitivity towards CO2 is achieved by incorporation of amino groups. The interaction of the cured layers with CO2 or with hydrocarbons has been studied in immersion experiments. Both the reaction of CO2 with incorporated amino groups and the penetration of hydrocarbons into the layer induce changes of the light absorption coefficient and the refractive index of the coating which are detected by measuring the output light intensity from the fiber.     

Sol-Gel Fabrication and Properties of Silica Cores of Optical Fibers Doped with Yb3+, Er3+, Al2 O3 or TiO2

Optical cores of preforms for drawing optical fibers doped with Er3+ and Yb3+ were fabricated by the sol-gel method with the aim of increasing the thickness of glass layers coated in a single coating cycle and to determine the relation between the preparation conditions and optical properties of the fibers. Al2O3-P2O5-SiO2 and TiO2-P2O5-SiO2 glasses have been studied as matrices for entrapping the rare-earth elements. Input sols have been prepared from silicon and titanium alkoxides, AlCl3, ErCl3, YbCl3, POCl3, water and a modifier under acidic catalysis of HCl. The sols were coated on the inner wall of a silica substrate tube and the gel layers were sintered at high temperatures up to 2000°C after which the tube was collapsed into the preform. Continuous and homogenous glass films with the maximum thickness of about 8 m were fabricated. The influence of high-temperature heat treatment of the layers on their composition and optical attenuation was observed. The amplified stimulated emission of Er3+ around 1.55 m was measured under the excitation of the fibers by an Nd : YAG laser at 1.064 m.     

A generalization of regula falsi

Summary The method of nondiscrete mathematical induction is applied to a multistep variant of the secant method. Optimal conditions for convergence as well as error estimates, sharp in every step, are obtained.     

Application of a contactless conductometric detector for the simultaneous determination of small anions and cations by capillary electrophoresis with dual-opposite end injection

A contactless conductometric detection (CCD) system for capillary electrophoresis (CE) with a flexible detection cell was applied for the simultaneous determination of small anions and/or cations in rain, surface and drainage water samples. The applied frequency, the amplitude of the input signal, the electrolyte conductivity and electrode distance were found to be the most significant factors affecting the detection sensitivity. 2-(N-Morpholino)ethanesulfonic acid/histidine-based (MES/His) electrolytes were used for direct conductivity detection of anions and cations, while ammonium acetate was selected for indirect conductivity determination of alkylammonium salts. For the simultaneous separation procedure, involving dual-opposite end injection, an electrolyte consisting of 20 mM MES/His, 1.5 mM 18-crown-6 and 20 microM cetyltrimethylammonium bromide provided baseline separation of 13 anions and cations in less than 6 min. The detection limits achieved were 7-30 micrograms/l for direct conductometric detection of various common inorganic cations and anions, excluding F- (62 micrograms/l) and H2PO4- (250 micrograms/l), and 35-178 micrograms/l for indirect conductometric detection of alkyl ammonium cations. The developed electrophoretic method with conductometric detection was compared to ion chromatography.     

Capillary electrophoretic studies of acid-base properties of sanguinarine and chelerythrine alkaloids

Capillary zone electrophoresis with UV detection was used for determination of dissociation constants of alkaloids sanguinarine and chelerythrine. Despite the limited solubility of the uncharged forms of the alkaloids resulting in insufficient analytical signal at higher pH the reliable dissociation constants were obtained when acidified samples containing low amount of the alkaloid were injected into the capillary. The precipitation of the alkaloid in the capillary induced by injecting sample of low pH into the background electrolyte of higher pH does not affect the mobility of the alkaloid if its concentration injected exceeds the solubility only to a small extent. Dissociation constants (pK(R+)) of sanguinarine and chelerythrine calculated to 8.3 +/- 0.1 and 9.2 +/- 0.1, respectively, are relevant to Good buffers of ionic strength of 30 mM.     

Rapid speciation of Se(IV) and Se(VI) by flow injection–capillary electrophoresis system with contactless conductivity detection

A flow injection–capillary electrophoresis system with contactless conductivity detection and hydrostatic-pressure-generated flow was used for the fast and sensitive speciation of Se(IV) and Se(VI). The sample throughput was 25 samples per hour using a background electrolyte solution containing 8.75 mM l-histidine (His) adjusted to pH 4.00 with acetic acid. The repeatability of peak areas (n=8) was better than 1.41% and the limits of detection were 190 g L^–1 and 7.5 g L^–1 for Se(IV) and Se(VI), respectively. The interference from carbonate, typically present in water samples, was eliminated by using a low-pH electrolyte in which carbonate is uncharged and migrates at the EOF front. The method was applied to the analysis of Se(IV) and Se(VI) in soil samples that were spiked with both selenium species and the results for recovery of both selenium species were in good agreement with their introduced concentrations.     

A two-step supercritical fluid extraction of polycyclic aromatic hydrocarbons from roadside soil samples

A two-step procedure for the supercritical fluid extraction (SFE) of polycyclic aromatic hydrocarbons from soil samples was developed. The procedure consists of a static supercritical fluid treatment in a closed extraction cell at a high temperature (T=250 or 340degreesC for 20 min) and an SFE with a solvent trapping. During the static phase, the sample is exposed to a supercritical organic solvent (methanol, toluene, dichloromethane, ACN, acetone, and hexane). The solvent penetrates particles of the matrix to substitute strongly bonded molecules and dissolves the analytes in the supercritical phase. At ambient temperature, supercritical fluids became liquid and lost their solvation abilities. Most of the analytes condense on the surface of the particles or on the extraction cell walls without forming strong bonds or penetrating deep into the matrix. Thus, the pretreatment liberates the analytes and they behave similar to those in freshly spiked samples. The common SFE with toluene-modified CO2 as an extraction fluid follows the static phase. With the use of the most suitable extraction phases (toluene, ACN), the extraction efficiency of the combined procedure is much higher (approximately100%). The results of the combined procedure are compared to the SFE procedure of the same untreated sample (difference less than 5%) and to the Soxhlet extraction. The extracts were analyzed using a GC with the flame ionization detection.