Probing water interactions and vacancy production on gadolinia-doped ceria surfaces using electron stimulated desorption

Polycrystalline gadolinia-doped ceria (GDC) surfaces were studied using low-energy (5-400 eV) electron stimulated desorption (ESD). H(+), O(+), and H(3)O(+) were the primary cationic desorption products with H(+) as the dominant channel. H(+), H(3)O(+), and O(+) have a 22 eV threshold followed by a yield change around 40 eV. H(+) also has an additional yield change approximately 75 eV and O(+) has an additional change approximately 150 eV. The O(+) ESD yield change approximately 150 eV may indicate bond breaking of Gd-O and the involvement of oxygen vacancies. The H(+) and H(3)O(+) threshold data collectively indicate the presence of hydroxyl groups and chemisorbed water molecules on the GDC surfaces. ESD temperature dependence measurements show that the interaction of water with GDC surface defect sites, mainly oxygen vacancies, influences the desorption of H(+), O(+), and H(3)O(+). The temperature dependence of the O(+) ESD at 400 eV incident electron energy yields a 0.21 eV activation energy. This is close to the energy needed for oxygen vacancy production next to a pair of Ce(3+) on a CeO(2) surface. These results may indicate a correlation between the O(+) ESD yield and oxygen vacancy density on GDC surfaces and a potential correlation of O(+) ESD and GDC ionic conductivity.     

Homolysis of the Ln-N (Ln = Yb, Eu) bond. Synthesis, structural characterization and catalytic activity of ytterbium(II) and europium(II) complexes with methoxyethyl functionalized indenyl ligands

The interaction of methoxyethyl functionalized indene compounds (C(9)H(6)-1-R-3-CH(2)CH(2)OMe, R =t-BuNHSiMe(2)(1), Me(3)Si (2), H (3)) with [(Me(3)Si)(2)N](3)Ln(mu-Cl)Li(THF)(3)(Ln=Yb (4), Eu (5)) produced a series of new ytterbium(II) and europium(II) complexes via tandem silylamine elimination/homolysis of the Ln-N (Ln=Yb, Eu) bond. Treatment of the lanthanide(III) amides [(Me(3)Si)(2)N](3)Ln(mu-Cl)Li(THF)(3)(Ln=Yb (4), Eu (5) with 2 equiv. of, 1,2 and 3, respectively, produced, after workup, the ytterbium(II) complexes [eta5:eta1-Me(2)Si(MeOCH(2)CH(2)C(9)H(5))(NHBu-t)](2)Yb(II) (6), (eta5:eta1-MeOCH(2)CH(2)C(9)H(5)SiMe(3))(2)Yb(II) (7), (eta5:eta1-MeOCH(2)CH(2)C(9)H(6))(2)Yb(II)(8) and the corresponding europium(II) complexes [eta5:eta1-Me(2)Si(MeOCH(2)CH(2)C(9)H(5))(NHBu-t)](2)Eu(II)(9), (eta5:eta1-MeOCH(2)CH(2)C(9)H(5)SiMe(3))(2)Eu(II)(10) and (eta5:eta1-MeOCH(2)CH(2)C(9)H(6))(2)Eu(II)(11) in moderate to good yield. In contrast, interaction of the corresponding indene compounds 1, 2 or 3 with the lanthanide amides [(Me(3)Si)(2)N](3)Ln (Ln = Yb, Eu) was not observed, while addition of 0.5 equiv. of anhydrous LiCl to the corresponding reaction mixture produced, after workup, the corresponding ytterbium(II) or europium(II) complexes. All the new compounds were fully characterized by spectroscopic and elemental analyses. The structures of complexes, and were determined by single-crystal X-ray analyses. The catalytic activity of all the ytterbium(II) and europium(II) complexes on MMA polymerization was examined. It was found that all the ytterbium(II) and europium(II) complexes can function as single-component MMA polymerization catalysts. The temperature, solvent and ligand effects on the catalytic activity were studied.     

Unprecedented cage-carbon to cage-boron NMe(3) transfer in a monocarbon Molybdenacarborane

The reagent Li(2)[7-NMe(3)-nido-7-CB(10)H(10)] reacts with [Mo(CO)(3)(NCMe)(3)] in THF-NCMe (THF = tetrahydrofuran) to give a molybdenacarborane intermediate which, upon oxidation by CH(2)[double bond]CHCH(2)Br or I(2) and then addition of [N(PPh(3))(2)]Cl, gives the salts [N(PPh(3))(2)][2,2,2-(CO)(3)-2-X-3-NMe(3)-closo-2,1-MoCB(10)H(10)] (X = Br (1) or I (2)). During the reaction, the cage-bound NMe(3) substituent is transferred from the cage-carbon atom to an adjacent cage-boron atom, a feature established spectroscopically in 1 and 2, and by X-ray diffraction studies on several of their derivatives. When [Rh(NCMe)(3)(eta(5)-C(5)Me(5))][BF(4)](2) is used as the oxidizing agent, the trimetallic compound [2,2,2-(CO)(3)-7-mu-H-2,7,11-[Rh(2)(mu-CO)(eta(5)-C(5)Me(5))(2)]-closo-2,1-MoCB(10)H(9)] (10) is formed, the NMe(3) group being lost. Reaction of 1 in CH(2)Cl(2) with Tl[PF(6)] in the presence of donor ligands L affords neutral zwitterionic compounds [2,2,2-(CO)(3)-2-L-3-NMe(3)-closo-2,1-MoCB(10)H(10)] for L = PPh(3) (4) or CNBu(t) (5), and [2-Bu(t)C[triple bond]CH-2,2-(CO)(2)-3-NMe(3)-closo-2,1-MoCB(10)H(10)] (6) when L = Bu(t)C[triple bond]CH. When 1 is treated with CNBu(t) and X(2), the metal center is oxidized, and in the products obtained, [2,2,2,2-(CNBu(t))(4)-2-Br-3-X-closo-2,1-MoCB(10)H(10)] (X = Br (7), I (8)), the B-NMe(3) bond is replaced by B-X. In contrast, treatment of 2 with I(2) and cyclo-1,4-S(2)(CH(2))(4) in CH(2)Cl(2) results in oxidative substitution of the cluster and retention of the NMe(3) group, giving [2,2,2-(CO)(3)-2-I-3-NMe(3)-6-[cyclo-1,4-S(2)(CH(2))(4)]-closo-2,1-MoCB(10)H(9)] (9). The unique structural features of the new compounds were confirmed by single-crystal X-ray diffraction studies upon 6, 7, 9 and 10.     

Alkyne coupling at a rhenium-monocarborane substrate: synthesis of Re,B-eta2:sigma-butadienyl complexes

Treatment of 7-NH(2)Bu(t)-nido-7-CB(10)H(12) in tetrahydrofuran (THF) with LiBu(n)(3 equiv) and then [ReBr(CO)(3)(THF)(2)] gives the rhenacarborane dianion [1-NHBu(t)-2,2,2-(CO)(3)-closo-2,1-ReCB(10)H(10)](2-), isolated as the bis-[N(PPh(3))(2)](+) salt (4). Iodine oxidation of this Re(I) intermediate gives the Re(III) complex [1,2-mu-NHBu(t)-2,2,2-(CO)(3)-closo-2,1-ReCB(10)H(10)] 6 in which the carborane functions formally as an 8-electron (6pi+ 2sigma) donor. Reaction of with ligands L in the presence of Me(3)NO gives substituted products [1,2-mu-NHBu(t)-2,2-(CO)(2)-2-L-closo-2,1-ReCB(10)H(10)][L = PPh(3)(7a), CNXyl (7b; Xyl = C(6)H(3)Me(2)-2,6), or Bu(t)C triple bond CH (7c)]. Formation of complex 7c is unexpectedly accompanied by [1,2-mu-NHBu(t)-2,2-(CO)(2)-3,2-sigma:eta(2)-{C(=CHBu(t))-CH=CHBu(t)}-closo-2,1-ReCB(10)H(9)] 8a, in which an alkyne-derived dienyl group is bound to both the rhenium centre and to an adjacent boron vertex. Complex 8a is also obtained from 7c with Bu(t)C triple bond CH and Me(3)NO. The same reaction of 7c, using PhC triple bond CH or CNXyl instead of Bu(t)C triple bond CH, gives, respectively, [1,2-micro-NHBu(t)-2,2-(CO)(2)-3,2-sigma:eta(2)-{C(=CHBu(t))-CH=CHPh}-closo-2,1-ReCB(10)H(9)] 8b and [1,2-micro-NHBu(t)-2-Bu(t)C triple bond CH-2-CO-2-CNXyl-closo-2,1-ReCB(10)H(10)] 9. Addition of donors L to results in displacement from rhenium of the pendant dienyl moiety, yielding [1,2-mu-NHBu(t)-2,2-(CO)(2)-2-L-3-{C(=CHBu(t))-CH=CHBu(t)}-closo-2,1-ReCB(10)H(9)][L = PMe(3)(10a), CNBu(t)(10b)]. Single-crystal X-ray diffraction analyses have confirmed the novel structural features of compounds 6, 7c, 8b and 9.     

Construction of 3-allylidene-4-vinyltetrahydrofurans and 3-allylidene-4-vinylpyrrolidines via sequential domino allylation/olefination of C-C triple bonds

An efficient method via sequential domino allylation/olefination of C-C triple bonds for the syntheses of five-membered heterocycles was developed by treatment 1,6-enynes with alkenes in the presence of a palladium catalyst. The configurations of the 1,3-dienes of the five-membered heterocycles are stereocontrolled.     

Paired interference 3-dB coupler based on SOI rib waveguides with anisotropic chemical wet etching

A 3-dB paired interference (PI) optical coupler in silicon-on-insulator (SOI) based on rib waveguides with trapezoidal cross section was designed with simulation by a modified finite-difference beam propagation method (FD-BPM) and fabricated by potassium hydroxide (KOH) anisotropic chemical wet etching. Theoretically, tolerances of width, length,and port distance are more than 1, 100, and 1 μm, respectively.Smooth interface was obtained with the propagation loss of 1.1 dB/crn at the wavelength of 1.55μm. The coupler has a good uniformity of 0.2 dB and low excess loss of less than 2 dB.     

An Efficient Approach for the Construction of Benzazepine and Benzoxepine Derivatives

A novel and facile synthetic protocol for the construction of benzazepine and benzoxepine derivatives through a copper(I)‐catalyzed reaction of 2‐(2‐ethynylphenyl)‐1‐tosylaziridine or 2‐(2‐ethynylphenyl)oxirane with sulfonyl azides is disclosed. A ketenimine is the key intermediate during the reaction process.     

边界元法在带可动边界的瞬时热传导问题中的应用

该文利用边界无法对二维瞬时传热和相变问题进行求解。采用空间二次曲线单元对边界进行离散化,并采用时间相关基本解正确处理了相应边界积分。计算表明该文数值格式稳定,结果与已有文献相比较吻合一致,且该文模式时段可放大,从而提高了计算效能和稳定性。