The Effect of the Nature and Structure of Adsorbents on Interaction with Ibuprofen

The interaction of ibuprofen [2-(4-isobutylphenyl)propionic acid] with the surface of carbon and oxide adsorbents was investigated. The significant role of wide pores during the adsorption of ibuprofen on carbon adsorbents in the presence of protein molecules was demonstrated. At low concentrations ibuprofen is adsorbed on the surface of hydrophilic and hydrophobic adsorbents in the form of a monomer, but the contribution from the adsorbed dimer increases with increase in its concentration.     

Sorption Modification of Fine Silica with Polyvinylpyrrolidone

The interaction of fine silica with polyvinylpyrrolidone in aqueous medium was studied by IR spectroscopy.     

Well-Defined Oxide Core-Poly(vinyl pyrrolidone) Shell Nanoparticles: Interactions and Multi-Modal Glass Transition Dynamics at Interfaces

Interfacial interactions and dynamics were studied in silica and alumina core-poly(vinyl pyrrolidone) (PVP) shell nanoparticles with different shell thicknesses starting from 1-2 nm (monolayer); their geometry and structural organization were comprehensively characterized by several techniques. Far- and mid-IR spectroscopy, combined with DSC activation analysis of the glass transition, allowed to register hydrogen bonding and Lewis/Brønsted interactions, and the multi-modal glass transition dynamics in PVP nanoshells, as well as their interrelationship. For PVP monolayer, only a few “abnormal” modes constituted glass transition which covered the temperature range from 80 to 230 °C, with varying the activation energy by an order of magnitude.     

Characteristics of adsorption phase with water/organic mixtures at a surface of activated carbons possessing intraparticle and textural porosities

The behaviour of water and water/organic mixtures adsorbed onto activated microporous carbons or a carbon adsorbent with narrow intraparticle micropores and broad mesopores and macropores between nanoparticles was studied using low-temperature adsorption method and ¹H NMR spectroscopy with layer-by-layer freezing-out of liquids at 190-273 K. These investigations revealed concentration-dependent effects of benzene, DMSO, acetone, chloroform, methane and acetonitrile on the characteristics of adsorbed water and the influence of this water on the interfacial behaviour of adsorbed organics. The influence of organics causes the structural and energetic differentiations of adsorbed water. The latter can be displaced by organics from micropores into broader pores and/or form mixture with polar solvents in meso and macropores. Freezing of adsorbed water can affect the adsorbent structure because ice crystallites have a larger size than that of liquid water droplets that lead to changes in the behaviour of adsorbed water/organic mixtures observed by the ¹H NMR and adsorption methods.     

Production of charmonium（like）states in e^＋e^- interactions

We present a search for new charmonium like states in e~ e~- annihilation using the initial-state radiation and the process e~ e~-→J/ψD~(*)~(*).The analyses are based on a huge data sample recorded near theγ(4S)resonance with the Belle detector at the KEKB e~ e~- asymmetric-energy collider.     

Structural and adsorption characteristics and catalytic activity of titania and titania-containing nanomaterials

Morphological, structural, adsorption, and catalytic properties of highly disperse titania prepared using sulfate and pyrogenic methods, and fumed titania-containing mixed oxides, were studied using XRD, TG/DTA, nitrogen adsorption, (1)H NMR, FTIR, microcalorimetry on immersion of oxides in water and decane, thermally stimulated depolarization current (TSDC) and catalytic photodecomposition of methylene blue (MB). Phase composition and aggregation characteristics of nanoparticles (pore size distribution) of sulfate and pyrogenically prepared titania are very different; temperature dependent structural properties are thus very different. Catalytic activity for the photodecomposition of MB is greatest (per gram of TiO(2) for the pure oxide materials) for non-treated ultrafine titania PC-500, which has the largest S(BET) value and smallest particle size of the materials studied. However, this activity calculated per m(2) is higher for PC-105, possessing a much smaller S(BET) value than PC-500. The activity per unit surface area of titania is greatest for the fumed silica-titania mixed oxide ST20. Calcination of PC-500 at 650 degrees C leads to enhancement of anatase content and catalytic activity, but heating at 800 and 900 degrees C lowers the anatase content (since rutile appears) and diminishes catalytic activity, as well as the specific surface area because of nanoparticle sintering.     

Structured water in partially dehydrated yeast cells and at partially hydrophobized fumed silica surface

Nonfreezable water structured due to interaction with endocellular objects in yeast cells (endocellular water) or with partially hydrophobic fumed silica (interfacial water) was studied by means of (1)H NMR spectroscopy with layer-by-layer freezing-out of bulk water and quantum chemical methods applied to water clusters in the gas and liquid (chloroform and cyclohexene) phases and adsorbed on silylated silica. Variation in cell hydration as well as in amount of water adsorbed on modified fumed silica leads to changes in the ratio between contributions of two water states characterized by NMR chemical shifts at delta(H)=1.1-1.7 and 4-5 ppm. Lowering of hydration and temperature results in an enhancement of the first signal, and the opposite result is observed for the second signal. These effects may be explained by structured water distribution in the form of relatively large nanodroplets (delta(H)=4-5 ppm is close to that for bulk water) and small clusters of the 2D structure, in which the fraction of hydrogen atoms out of the hydrogen bonds (delta(H)=1.1-1.7 ppm) is larger than that in nanodroplets.     

Characterization of Fumed Alumina/Silica/Titania in the Gas Phase and in Aqueous Suspension

Fumed oxide alumina/silica/titania was studied in comparison with fumed alumina, silica, titania, alumina/silica, and titania/silica by means of XRD, ¹H NMR, IR, optical, dielectric relaxation, and photon correlation spectroscopies, electrophoresis, and quantum chemical methods. The explored Al₂O₃/SiO₂/TiO₂ consists of amorphous alumina (22 wt%), amorphous silica (28 wt%), and crystalline titania (50 wt%, with a blend of anatase (88%) and rutile (12%)) and has a wide assortment of Brønsted and Lewis acid sites, which provide a greater acidity than that of individual fumed alumina, silica, or titania and an acidity close to that of fumed alumina/silica or titania/silica. The changes in the Gibbs free energy (ΔG) of interfacial water in an aqueous suspension of Al₂O₃/SiO₂/TiO₂ are close to the ΔG values of the dispersions of pure rutile but markedly lower than those of alumina, anatase, or rutile covered by alumina and silica. The zeta potential of Al₂O₃/SiO₂/TiO₂ (pH of the isoelectric point (IEP) equals ≈3.3) is akin to that of fumed titania (pH(IEP_TiO2) ≈ 6) at pH > 6, but it significantly differs from the ζ of fumed alumina (pH(IEP_Al2O3) ≈ 9.8) at any pH value as well as those of fumed silica, titania/silica, and alumina/silica at pH < 6. The particle size distribution in the diluted aqueous suspensions of Al₂O₃/SiO₂/TiO₂ studied by means of photon correlation spectroscopy depends relatively slightly on pH in contrast to the titania/silica or alumina/silica dispersions. Theoretical calculations of oxide cluster interaction with water show a high probability of hydrolysis of Al–O–Ti and Si–O–Ti bonds strained at the interface of alumina/titania or silica/titania due to structural differences in the lattices of the corresponding individual oxides. Ab initio calculated chemical shift δ_H values of H atoms in different hydroxyl groups at the oxide clusters and in bound water molecules are in agreement with the ¹H NMR data and show a significant impact of charged particles (H₃O⁺ or OH⁻) on the average δ_H values of water droplets with (H₂O)_n at n between 2 and 48.     

Use of kinetic method for determining the concentration of hydroxyl groups on a surface of silica

The reactions of surface hydroxyl groups of pyrogenic silica, Aerosil with chromium oxychloride and trichlorosilane are satisfactorily described at the initial sections by the first and second order equations. These reactions were used as an example and it was shown that the kinetic method is applicable for determining the concentration of OH groups on the SiO₂ surface.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 23, No. 2, pp. 252–255, March–April, 1987.     

Adsorption of cinnamic and caffeic acids on the surface of highly dispersed silica from different solvents

The adsorption of cinnamic and caffeic acids on initial and partially silylated highly dispersed silica A-300 from polar (water-ethanol solution), low polar (chloroform and dichloroethane), and apolar (hexane and carbon tetrachloride) solvents is investigated. The dependence of adsorption on solvent polarity is established. It is disclosed that the dependences of the adsorption of cinnamic and caffeic acids on the degree of surface hydrophobization have different characters.