Polypyrrole/silica/magnetite nanoparticles as a sorbent for the extraction of sulfonamides from water samples

A magnetic solid‐phase extraction sorbent of polypyrrole/silica/magnetite nanoparticles was successfully synthesized and applied for the extraction and preconcentration of sulfonamides in water samples. The magnetite nanoparticles provided a simple and fast separation method for the analytes in water samples. The silica coating increased the surface area that helped to increase the polypyrrole layer. The polypyrrole‐coated silica provided a high extraction efficiency due to the π–π and hydrophobic interactions between the polypyrrole and sulfonamides. Several parameters that affected the extraction efficiencies, i.e. the amount of sorbent, pH of the sample, extraction time, extraction temperature, ionic strength, and desorption conditions were investigated. Under the optimal conditions, the method was linear over the range of 0.30–200 μg/L for sulfadiazine and sulfamerazine, and 1.0–200 μg/L for sulfamethazine and sulfamonomethoxine. The limit of detection was 0.30 μg/L for sulfadiazine and sulfamerazine and 1.0 μg/L for sulfamethazine and sulfamonomethoxine. This simple and rapid method was successfully applied to efficiently extract sulfonamides from water samples. It showed a high extraction efficiency for all tested sulfonamides, and the recoveries were in the range of 86.7–99.7% with relative standard deviations of < 6%.     

Polyaniline‐coated cigarette filters as a solid‐phase extraction sorbent for the extraction and enrichment of polycyclic aromatic hydrocarbon in water samples

Polyaniline coated cigarette filters were successfully synthesized and used as a solid‐phase extraction sorbent for the extraction and preconcentration of polycyclic aromatic hydrocarbons in water samples. The polyaniline helped to enhance the adsorption ability of polycyclic aromatic hydrocarbons on the sorbent through π–π interactions. The high porosity and large surface area of the cigarette filters helped to reduce backpressure and can be operated with high sample flow rate without loss of extraction efficiency. The developed sorbent was characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. The parameters that affected the extraction efficiencies, i.e. polymerization time, type of desorption solvent and its volume, sample flow rate, sample volume, sample pH, ionic strength, and organic modifier were investigated. Under the optimal conditions, the method was linear over the range of 0.5–10 μg/L and a detection limit of 0.5 ng/L. This simple, rapid, and cost‐effective method was successfully applied to the preconcentration of polycyclic aromatic hydrocarbons from water samples. The developed method provided a high enrichment factor with good extraction efficiency (85–98%) and a relative standard deviation <10%.     

New sulfonate composite functionalized with multiwalled carbon nanotubes with cryogel solid‐phase extraction sorbent for the determination of β‐agonists in animal feeds

A new mixed‐mode cation‐exchange sulfonate composite functionalized with multiwalled carbon nanotubes with polyvinyl alcohol cryogel was fabricated and used for the first time as a solid‐phase extraction sorbent for the determination of β‐agonists in animal feeds. Feed samples were extracted with 0.20 M phosphoric acid and methanol (1:4, v/v) using ultrasonication, cleaned‐up using the developed sorbent to which the β‐agonists bound then finally eluted with 5.0% ammonia in methanol and analyzed by high‐performance liquid chromatography. Various parameters that affected the extraction efficiency were optimized. Under the optimal conditions, the developed sorbent strongly interacted with β‐agonists by cationic exchange and hydrophobic and hydrophilic interactions, that provided a high extraction efficiency in the range of 92.8 ± 3.7–104.4 ± 2.3% over a range of 0.04–2.0 mg/kg for salbutamol and ractopamine, and 0.40–8.0 mg/kg for clenbuterol. The relative standard deviations were less than 6.0%. The developed method was successfully applied for the determination of β‐agonists in various types of animal feed and effectively reduced any matrix interference.     

Polypyrrole‐coated alginate/magnetite nanoparticles composite sorbent for the extraction of endocrine‐disrupting compounds

Magnetite nanoparticles incorporated into alginate beads and coated with a polypyrrole adsorbent were prepared (polypyrrole/Fe₃O₄/alginate bead) and used as an effective magnetic solid‐phase extraction sorbent for the extraction and enrichment of endocrine‐disrupting compounds (estriol, β‐estradiol and bisphenol A) in water samples. The determination of the extracted endocrine‐disrupting compounds was performed using high‐performance liquid chromatography with a fluorescence detector. The effect of various parameters on the extraction efficiency of endocrine disrupting compounds were investigated and optimized including the type and amount of sorbent, sample pH, extraction time, stirring speed, and desorption conditions. Under optimum conditions, the calibration curves were linear in the concentration range of 0.5–100.0 μg/L, and the limit of detection was 0.5 μg/L. The developed method showed a high extraction efficiency, the recoveries were in the range of 90.5 ± 4.1 to 98.2 ± 5.5%. The developed sorbent was easy to prepare, was cost‐effective, robust, and provided a good reproducibility (RSDs < 5%), and could be reused 16 times. The developed method was successfully applied for the determination of endocrine‐disrupting compounds in water samples.     

A hierarchical porous composite magnetic sorbent of reduced graphene oxide embedded in polyvinyl alcohol cryogel for solvent-assisted-solid phase extraction of polycyclic aromatic hydrocarbons

A hierarchical porouscomposite magnetic sorbent was fabricated and applied to the dispersive solvent-assisted solid-phase extraction of five polycyclic aromatic hydrocarbons. A sorbent was first prepared by incorporating graphene oxide, calcium carbonate, and magnetite nanoparticles into a polyvinyl alcohol cryogel. The graphene oxide was converted to reduced graphene oxide using ascorbic acid and a hierarchical porous structure was produced by reacting hydrochloric acid with incorporated calcium carbonate to generate carbon dioxide bubbles which created a second network. Before extracting the target analytes, the extraction solvent was introduced into the hierarchical pore network of the sorbent. The extraction was based on the partition between the analytes and introduced extraction solvent and the adsorption of analytes on reduced graphene oxide.The extraction efficiency was enhanced through π-π and hydrophobic interactions between polycyclic aromatic hydrocarbons and reduced graphene oxide and extraction solvent. The extracted polycyclic aromatic hydrocarbons were determined by using high-performance liquid chromatography coupled with a fluorescence detector. The developed method was applied to extract polycyclic aromatic hydrocarbons in disposable diaper, coffee, and tea samples and recoveries from 84.5 to 99.4% were achieved with relative standard deviations below 7%. The developed sorbent exhibited good reproducibility and could be reused for 10 cycles.The developed sorbent exhibited good reproducibility and could be reused for 10 cycles.The developed sorbent exhibited good reproducibility and could be reused for 10 cycles.     

Dispersive magnetic solid phase extraction using octadecyl coated silica magnetite nanoparticles for the extraction of tetracyclines in water samples

Magnetite nanoparticles coated with silica and hydrophobic octadecyl layers were successfully synthesized and used in magnetic solid phase extraction of tetracyclines from water samples. The magnetite nanoparticles facilitated a convenient magnetic separation of sorbent from an aqueous sample, the octadecyl layer helped to enhance the adsorption ability and the silica layer helped to prevent the aggregation of the magnetite nanoparticles. The effect of various parameters on the extraction efficiency were optimized including the amount of sorbent, sample pH, stirring rate, extraction time and desorption conditions. Under the optimum conditions, the recoveries were in the range of 82 to 88%, the calibration curves were linear over the concentration range of 0.002 to 1.0 μg/mL for oxytetracycline and 0.01 to 1.0 μg/mL for tetracycline and chlortetracycline, respectively. The developed method had several advantages such as simplicity, convenience, cost-effectiveness and high extraction efficiency.     

Bispalladium(II) Complexes of di-p-Pyrirubyrin Derivatives as Promising Near-Infrared Photoacoustic Dyes

The insertion of palladium(II) into di-p-pyrirubyrin results in mutually convertible bimetallic complexes. Post-synthetic functionalization of one of them yielded bispalladium(II) dioxo-di-p-pyrirubyrin and, after demetallation, dioxo-di-p-pyrirubyrin, introducing for the first time the α,β′-pyridin-2-one unit into the macrocyclic frame. Bispalladium(II) di-p-pyrirubyrin 6 , bispalladium(II) dioxo-di-p-pyrirubyrin 9 , and dioxo-di-p-pyrirubyrin 10 absorb and emit light around 1000 nm and are characterized by high photostability. Thus, they are promising candidates for near-infrared photoacoustic dyes, ideally targeting ( 9 ) the wavelength of Yb-based fiber lasers. The incorporation of an α,β′-pyridine moiety into expanded porphyrins opens a highly interesting area of research due to the attractive optical and coordination properties of the resulting molecules.