A new method for atmospheric nitrogen dioxide measurements using the combination of a stripping coil and fluorescence detection.

A new stripping coil for the collection of nitrogen dioxide (NO2) has been developed to increase its versatility and efficiency. Nitrogen dioxide measurements based on quantitative collection through a reaction coil into an alkaline solution has been examined. Nitrogen dioxide is collected in a 0.1 N NaOH solution. This collection system has an efficiency of nearly 100%. The absorbed nitrogen dioxide has been measured by fluorescence detection with sub-ppbv detection limits. The excitation wavelength at 360 nm and the produced emission wavelength at 405 nm were suitable for nitrite ion measurements.     

Polymerization and copolymerization of methacrylic esters derived from glycidyl methacrylate

Copolymerization of methacrylic esters derived from glycidyl methacrylate and nucleophiles with styrene was carried out. The monomer reactivity ratios of these methacrylic esters were varied with the alkoxy groups of the esters and the solvent used.     

Asymmetric skeletal rearrangement of symmetrically alpha,alpha-disubstituted alpha-amino aldehydes: a new entry to optically active alpha-hydroxy ketones

A unique asymmetric skeletal rearrangement of symmetrically alpha,alpha-disubstituted alpha-amino aldehydes has been accomplished for the first time using a chiral organoaluminum Lewis acid 1. For instance, treatment of (S)-2,2'-bis(trifluoromethanesulfonylamino)-1,1'-binaphthyl with Me3Al (1.0 equiv) in toluene at room temperature for 15 min and at 110 degrees C for an additional 15 min produced (S)-1, and a subsequent reaction with alpha -amino aldehyde 2a (R = CH2Ph) at -78 degrees C for 4 h and at -40 degrees C for 12 h resulted in the smooth rearrangement to the zwitterionic iminium intermediate A, which furnished the alpha-hydroxy ketone 3a (R = CH2Ph) in 93% isolated yield with 95% ee (S) after acidic hydrolysis. This result, together with other representative examples, clearly demonstrates the effectiveness of the present method for the hitherto difficult asymmetric synthesis of acyloins. Furthermore, we found that the treatment of the in situ generated A with DIBAH afforded the corresponding anti amino alcohol exclusively without loss of enantiomeric excess. Our approach casts light on the previously unexplored yet potential utility of alpha-amino aldehydes as synthetic building blocks and also provides a new entry to optically active alpha-hydroxy ketones and 1,2-amino alcohols.     

Ideal nonideality in adsorption of 2-aminoethanethiol and 2-mercaptoethane sulfonic acid to form electrostatically stabilized binary self-assembled monolayers on Au(111)

In formation of binary self-assembled monolayers (SAMs) composed of 2-aminoethanethiol (AET) and 2-mercaptoethane sulfonic acid (MES) by adsorption from an ethanol solution on Au(111), the adsorption shows nearly ideal nonideality in that the surface ratio of MES to AET in the SAM is unity and does not depend on the mixing ratio of MES to AET in the bathing ethanol solution used for preparing SAMs, chi(soln)MES, over the wide range of chi(soln)MES between 0.01 and 0.95. X-ray photoelectron spectroscopy confirms that at least 80% of AET molecules adsorbed are protonated in this range of chi(soln)MES, indicating that the electrostatic interaction between positively charged AET and negatively charged MES is responsible to the observed nonideality. Correspondingly, there appears only one cathodic peak in a linear-sweep voltammogram of the reductive desorption of the SAM, having a narrow full width at half-maximum of about 20 mV. This suggests the presence of strong lateral attractive interaction between the adsorbed thiolates.     

A comparison of supercritical carbon dioxide and organic solvents for the intercalation of 4-phenylazoaniline into a pillared clay mineral

The intercalation of 4-phenylazoaniline (PAA) in supercritical carbon dioxide (SC-CO(2)) into montmorillonite (TMA-Mnt) pillared with tetramethylammonium ions at 313 K and 15 MPa was investigated. The adsorption rate and equilibrium PAA uptake were compared with those in n-hexane, CCl(4) and benzene solutions at 313 K. The XRD and N(2) adsorption/desorption analyses showed that TMA-Mnt after adsorption of PAA in SC-CO(2) had the same pore structure as after adsorption of PAA in normal solvents. SC-CO(2) was found to be a good medium for PAA adsorption owing to its having a relatively high adsorption rate and the highest adsorptivity at the same PAA concentration. The properties of PAA adsorption on TMA-Mnt could be well elucidated by the difference in solubility parameters between liquid and solid phases.     

On the Choquet integrals associated to Bessel capacities

Czechoslovak Mathematical Journal - We characterize the Choquet integrals associated to Bessel capacities in terms of the preduals of the Sobolev multiplier spaces. We make use of the boundedness...     

Two-fluid electroosmotic flow in microchannels

This paper presents a mathematical model to describe a two-fluid electroosmotic pumping technique, in which an electrically non-conducting fluid is delivered by the interfacial viscous force of a conducting fluid; the latter is driven by electroosmosis. The electrical potential in the conducting fluid and the analytical solution of the steady two-fluid electroosmotic stratified flow in a rectangular microchannel was presented by assuming a planar interface between the two immiscible fluids. The effects of viscosity ratio, hold-up, concentration, and interfacial zeta potential are analyzed to show the potential feasibility of this technique.     

Adsorption of phosphate from seawater on calcined MgMn-layered double hydroxides

Adsorptive properties of MgMn-3-300 (MgMn-type layered double hydroxide with Mg/Mn mole ratio of 3, calcined at 300 degrees C) for phosphate were investigated in phosphate-enriched seawater with a concentration of 0.30 mg-P/dm3. It showed the highest phosphate uptake from the seawater among the inorganic adsorbents studied (hydrotalcite, calcined hydrotalcite, activated magnesia, hydrous aluminum oxide, manganese oxide (delta-MnO2)). The phosphate uptake by MgMn-3-300 reached 7.3 mg-P/g at an adsorbent/solution ratio of 0.05 g/2 dm3. The analyses of the uptakes of other constituents (Na+, K+, Ca(+, Cl-, and SO(2-)4) of seawater showed that the adsorbent had a markedly high selectivity for the adsorption of phosphate ions. Effects of initial phosphate concentration, temperature, pH, and salinity on phosphate uptake were investigated in detail by a batch method. The phosphate uptake increased slightly with an increase in the adsorption temperature. The adsorption isotherm followed Freundlich's equation with constants of logK(F)=1.25 and 1/n=0.65, indicating that it could effectively remove phosphate even from a solution of markedly low phosphate concentration as well as with large numbers of coexisting ions. The pH dependence showed a maximum phosphate uptake around pH 8.5. The pH dependence curve suggested that selective phosphate adsorption progresses mainly by the ion exchange of HPO(2-)4. The study on the effect of salinity suggested the presence of two kinds of adsorption sites in the adsorbent: one nonspecific site with weak interaction and one specific site with strong interaction. The effective desorption of phosphate could be achieved using a mixed solution of 5 M NaCl + 0.1 M NaOH (1 M = 1 mol/dm3), with negligible dissolution of adsorbent. The adsorbent had high chemical stability against the adsorption/desorption cycle; it kept a good phosphate uptake even after the repetition of the seventh cycle.