A specific sensitive HPLC method for determination of plasma dopamine

Summary We describe here a sensitive, selective and rapid method to quantitate plasma catecholamines, especially dopamine, using high-performance liquid chromatography with electrochemical detection. This method requires a 10-minute run time and has a threshold for detection of 2 picograms, (10pg/ml).A number of commonly employed mobile phases for catecholamine analysis have been tested and have failed to detect dopamine in biological samples. Neither acetonitrile (3–7%) or methanol, (5–8%) in the mobile phase has produced consistently interpretable data either due to inability to detect or interference from co-eluting substances. Optimal detection was achieved with a mobile phase containing sodium acetate (6.8g), citric acid (5.9g), EDTA (48mg), di-n-butylamine (270l), Na-1-octane sulfate (850mg), methanol (100 ml) (amounts refer to 1 liter aqueous solution) (pH 4.3). The mobile phase was passed through a Waters 5 resolve C₁₈ column using a Waters 590 pump and m460 electrochemical detector and 740 data module, Flow rate was 0.9ml/min. Using this method, normal values in human and swine left ventricular myocardium and human and swine plasma have been established for norepinephrine, epinephrine, and dopamine.     

Novel bisbenzopyronopyran derivatives: photochemical synthesis and their in-vitro antimicrobial studies

The present research work describes the productive synthesis of novel bisbenzopyronopyran derivatives 4(a-h) and 5(a-h) via the photocyclization reactions of bischromones 3(a-h) under the inert conditions. The latter compounds have been realized efficiently through the O-alkylation reactions of the 3-hydroxychromone 2 with suitable dihalogenated aliphatic/aromatic/heteroaromatic reagents in the presence of dry acetone/anhydrous K₂CO₃/Bu₄N⁺I⁻ (PTC). The cyclization reaction of chalcone 1 under the Algar-Flynn-Oyamada reaction conditions (KOH/H₂O₂) could results in the formation of compound 2 in the good yield. The structural scaffolds of the newly prepared bischromones and resultant bisbenzopyronopyrans have been certified from the meticulous analysis of their various spectroscopic parameters such as UV-Vis, IR, ¹H/¹³C-NMR, and ESI-MS. It was found that o/m/p-xylene and pyridine-linked final symmetrical bistetracycles exhibited higher antimicrobial potencies as compared to alkyl chain-linked cyclized products. The bischromones 3(a-h) could be able to endow modest level of antimicrobial behavior.     

Recent progress of poly (N-isopropylacrylamide) hybrid hydrogels: synthesis,fundamentals and applications – review

Hydrogels, having nanomaterials (e.g. nanoparticles and nanorods) incorporated inside their polymeric meshes, are generally called hybrid gels/hydrogels. These assemblies combine the properties of both hydrogels and nanomaterials in one system. These responsive hybrid hydrogels, particularly polymerized N-isopropylacrylamide (PoNip) polymeric gels, have been extensively exploited for various multi-disciplinary applications in the literature over the past two decades because of their unique and exquisite particulars. Next generation assemblies have been prepared by using the smart nature of these gels toward the general incentives (e.g. temperature, ionic strength, and pH) in the fields of nanocatalysis, water purification, drug delivery, photonics, and optics. This review presents an overview of the PoNip hybrid assemblies engineered over the past 7 years i.e. 2010–2016 and extensively discusses the interaction of the incorporated nanomaterial with the polymeric chains of the hydrogels as it is the most significant factor which makes these assemblies attractive for all the associated applications. Moreover, this article also describes the preparative routes, properties, classification, and applications of these hybrid hydrogels in the fields of medicine, environment, catalysis, and nanotechnology.     

Competitive hydrogen bonding and self‐assembly in poly(2‐vinyl pyridine)‐block‐poly(methyl methacrylate)/poly(hydroxyether of bisphenol A) blends

Blends of poly(2‐vinyl pyridine)‐block‐poly(methyl methacrylate) (P2VP‐b‐PMMA) and poly(hydroxyether of bisphenol A) (phenoxy) were prepared by solvent casting from chloroform solution. The specific interactions, phase behavior and nanostructure morphologies of these blends were investigated by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), dynamic light scattering (DLS), atomic force microscopy (AFM), and transmission electron microscopy (TEM). In this block copolymer/homopolymer blend system, it is established that competitive hydrogen bonding exists as both blocks of the P2VP‐b‐PMMA are capable of forming intermolecular hydrogen bonds with phenoxy. It was observed that the interaction between phenoxy and P2VP is stronger than that between phenoxy and PMMA. This imbalance in the intermolecular interactions and the repulsions between the two blocks of the diblock copolymer lead to a variety of phase morphologies. At low phenoxy concentration, spherical micelles are observed. As the concentration increases, PMMA begins to interact with phenoxy, leading to the changes of morphology from spherical to wormlike micelles and finally forms a homogenous system. A model is proposed to describe the self‐assembled nanostructures of the P2VP‐b‐PMMA/phenoxy blends, and the competitive hydrogen bonding is responsible for the morphological changes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1894–1905, 2009     

FI-spectrophotometric determination of uranium after preconcentration on an anion exchange resin

An economical, fast, sensitive and selective method for the determination of uranium (VI) from sulfate media based on the flow injection on-line preconcentration in a minicolumn having amberlite IRA-402 (strong anion exchange) resin is described. Uranium (VI) was selectively adsorbed on the resin as uranyl trisulfate complex from aqueous solution of pH 2 in the minicolumn (2.56 mm i.d. and 7.5 cm in length) at a flow rate of 10 ml min^?1. The adsorbed uranyl trisulfate complex was eluted by HClO₄ (0.1 mol l^?1, 6.5 ml min^?1) and mixed with arsenazo-III (0.05 %, 6.5 ml min^?1), and passed through the flow through cell of spectrophotometer where its absorbance was measured at 653 nm. Various parameters affecting adsorption and elution of the uranium complex were optimized. For data analyses peak absorbance was used. For 60 and 180 s preconcentration time, enrichment factors (EF) 20 and 40, sampling frequency (SF) 45 and 18 h^?1; and detection limits (DL) (3σ) 14.2 and 8.6 μg l^?1 were obtained, respectively. To enhance the sensitivity of the system, two minicolumns (described above) were used for simultaneous preconcentration and elution purpose. For 60 and 180 s preconcentration time, EF 30 and 50, SF 42 and 17 h^?1 and DL (3σ) 4.4 and 3.44 μg l^?1 were obtained, respectively. The effect of various anions and cations was studied for single column manifold. High selectivity of this method was observed. All the anions and cations studied did not interfere up to 330 times higher mass ratio to 300 μg l^?1 U (VI) except Th(IV) which was tolerated up to 133 times by the addition of washing step in the manifold. The method based on single column manifold was applied on the spiked tap water, biological sample CRM (IAEA-V4) and synthetic leach liquor solution and good recovery was obtained. The method based on dual column manifold was validated on lake sediment SL-1 (CRM) and the results obtained were in good agreement at 95 % confidence level with the given value.     

A Simple and Effective Approach to Vesicles and Large Compound Vesicles via Complexation of Amphiphilic Block Copolymer With Polyelectrolyte in Water

This work reports for the first time a simple and effective approach to trigger a spheres‐to‐ vesicles morphological transition from amphiphilic block copolymer/polyelectrolyte complexes in aqueous solution. Vesicles and large compound vesicles (LCVs) were prepared via complexation of polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) with poly(acrylic acid) (PAA) in water and directly visualized using cryo‐TEM. The complexation and morphological transitions were driven by the hydrogen bonding between the complementary binding sites on the PAA and PEO blocks of the block copolymer. The findings in this work suggest that complexation between amphiphilic block copolymer and polyelectrolyte is a viable approach to vesicles and LCVs in aqueous media.     

Ligand-bridged dinuclear cyclometalated Ir(III) complexes: from metallamacrocycles to discrete dimers

Metallamacrocycles 1, 2, and 3 of the general formula [{Ir(ppy)(2)}(2)(μ-BL)(2)](OTf)(2) (ppyH = 2-phenyl pyridine; BL = 1,2-bis(4-pyridyl)ethane (bpa) (1), 1,3-bis(4-pyridyl)propane (bpp) (2), and trans-1,2-bis(4-pyridyl)ethylene (bpe) (3)) have been synthesized by the reaction of [{(ppy)(2)Ir}(2)(μ-Cl)(2)], first with AgOTf to effect dechlorination and later with various bridging ligands. Open-frame dimers [{Ir(ppy)(2)}(2)(μ-BL)](OTf)(2) were obtained in a similar manner by utilizing N,N'-bis(2-pyridyl)methylene-hydrazine (abp) and N,N'-(bis(2-pyridyl)formylidene)ethane-1,2-diamine (bpfd) (for compounds 4 and 5, respectively) as bridging ligands. Molecular structures of 1, 3, 4, and 5 were established by X-ray crystallography. Cyclic voltammetry experiments reveal weakly interacting "Ir(ppy)(2)" units bridged by ethylene-linked bpe ligand in 3; on the contrary the metal centers are electronically isolated in 1 and 2 where the bridging ligands are based on ethane and propane linkers. The dimer 4 exhibits two accessible reversible reduction couples separated by 570 mV indicating the stability of the one-electron reduced species located on the diimine-based bridge abp. The "Ir(ppy)(2)" units in compound 5 are noninteracting as the electronic conduit is truncated by the ethane spacer in the bpfd bridge. The dinuclear compounds 1-5 show ligand centered (LC) transitions involving ppy ligands and mixed metal to ligand/ligand to ligand charge transfer (MLCT/LLCT) transitions involving both the cyclometalating ppy and bridging ligands (BL) in the UV-vis spectra. For the conjugated bridge bpe in compound 3 and abp in compound 4, the lowest-energy charge-transfer absorptions are red-shifted with enhanced intensity. In accordance with their similar electronic structures, compounds 1 and 2 exhibit identical emissions. The presence of vibronic structures in these compounds indicates a predominantly (3)LC excited states. On the contrary, broad and unstructured phosphorescence bands in compounds 3-5 strongly suggest emissive states of mixed (3)MLCT/(3)LLCT character. Density functional theory (DFT) calculations have been carried out to gain insight on the frontier orbitals, and to rationalize the electrochemical and photophysical properties of the compounds based on their electronic structures.     

Elucidation of the Roles of Ionic Liquid in CO2 Electrochemical Reduction to Value-Added Chemicals and Fuels

The electrochemical reduction of carbon dioxide (CO₂ER) is amongst one the most promising technologies to reduce greenhouse gas emissions since carbon dioxide (CO₂) can be converted to value-added products. Moreover, the possibility of using a renewable source of energy makes this process environmentally compelling. CO₂ER in ionic liquids (ILs) has recently attracted attention due to its unique properties in reducing overpotential and raising faradaic efficiency. The current literature on CO₂ER mainly reports on the effect of structures, physical and chemical interactions, acidity, and the electrode–electrolyte interface region on the reaction mechanism. However, in this work, new insights are presented for the CO₂ER reaction mechanism that are based on the molecular interactions of the ILs and their physicochemical properties. This new insight will open possibilities for the utilization of new types of ionic liquids. Additionally, the roles of anions, cations, and the electrodes in the CO₂ER reactions are also reviewed.     

Substituents effect on thermal electrocyclic reaction of dihydroazulene–vinylheptafulvene photoswitch: a DFT study to improve the photoswitch

Thermal cyclization for a series of substituted vinylheptafulvenes (VHFs) to dihydroazulenes (DHAs) was studied at PBE0 method of density functional theory in the gas phase and in the acetonitrile solvent (through PCM). Judicious control of the thermal reaction through substituent is quite necessary to design thermally robust DHA–VHF photoswitches. For most of the substituents, DHA was predicted thermodynamically stable over VHF except for amino (in gas phase and solvent) and hydroxyl (in acetonitrile), where DHA isomers were calculated thermally unstable compared to VHF. Activation barriers for thermal electrocyclic reaction in both media showed positive correlation with Taft’s σ _R values at positions 7 and 5, however, a negative correlation was observed at position 4 and 6. The latter unprecedented behavior is proposed to arise from the delocalization of negative charges on the seven membered ring. Activation barriers for amino-substituted VHFs were generally lower than expected from Taft’s σ _R. A fluoro group at the position 7 was quite effective in imparting very high activation barrier (31.73 kcal mol^?1) for the thermal cyclization in the gas phase. However, in the acetonitrile solvent, the highest activation barriers were observed for electron withdrawing CHO (28.10 kcal mol^?1) and NO₂ (28.13 kcal mol^?1) groups at positions 7.     

Characterisation of Plasmodium falciparum aspartic protease inhibition by piperidine derivatives

Piperidine derivatives are reported to exhibit a variety of pharmacological activities. In this article, synthesis and aspartic protease inhibitory activity of three nitrophenacyl derivatives of N-methyl-4-hydroxy piperidine are reported. Enzyme assays showed that the attachment of a nitro group in the benzene ring plays an important role in the inhibition of plasmepsin-II of Plasmodium falciparum. The compound 1-methyl-1-(4'-nitrophenacyl)-4-hydroxypiperidinium bromide (3), consisting of a nitro group at the para position, was the most active at the concentration of 1.0?μM. The activity of the compounds was evaluated through the observed orientation and diagrammatic representation of nitrophenacyl derivatives of 4-hydroxy piperidine.