Synthesis of 2,3‐Dihydro‐4H‐furo[3,2‐c] chromen‐4‐ones and 2,3‐Dihydronaphtho[2,3‐b]furan‐4,9‐diones by the Radical Cyclizations of Hydroxyenones with Electron-Rich Alkenes using Manganese(III) Acetate

We have obtained dihydrofurans 3a–j in the radical cyclization of 4‐hydroxycoumarin 1a and 2‐hydroxy‐1,4‐naphtoquinone 1b with electron rich alkenes 2a–i by manganese(III) acetate. Methods A and B, which have different molar ratios were studied comparatively in these reactions, and we observed that method B (molar ratio 2:1:3) gave the best results. Treatment of 4‐hydroxycoumarin 1a and electron rich alkenes 2a–e gave 2,3‐dihydro‐4H‐furo[3,2‐c]chromen‐4‐ones 3a–e in 36–86% yields by the method B. Under the same conditions, the reactions of 2‐hydroxy‐1,4‐naphtaquinone 1b with conjugated alkenes 2b and 2f–i afforded 2,3‐dihydronaphtho[2,3‐b]furan‐4,9‐diones 3f–j in an excellent yields.     

Mn(III)-based reaction of alkenes with quinolinones. Formation of peroxyquinolinones and quinoline-related derivatives

The reactions of 1,1-disubstituted alkenes with 4-hydroxyquinolin-2(1H)-ones under both Mn(III)-catalyzed aerobic oxidation conditions at room temperature and Mn(III)-mediated oxidation conditions at reflux temperature are described. The Mn(III)-catalyzed aerobic oxidation afforded bis(hydroperoxyethyl)quinolinones and azatrioxa[4.4.3]propellanes, while the oxidation with Mn(OAc)₃·2H₂O produced furo[3,2-c]quinolin-4-one analogues. The existence of a substituent at the 3-position of the 4-hydroxyquinolin-2(1H)-ones prevented a double reaction with the alkenes, and (endoperoxy)quinolinones and/or (hydroperoxyethyl)quinolinones were obtained under the Mn(III)-catalyzed aerobic conditions, while furo[3,2-c]quinolinone hemiacetals and vinylquinolinones were selectively produced under the Mn(III)-mediated oxidation conditions depending on the reaction temperature and times. Cyclic assembly of quinolinone-related 1,3-dicarbonyl compounds such as dihydropyridinones, pyranones, and dimedone derivatives was also examined under elevated temperature conditions.     

Synthesis and structural characterization of CsAg5Se3 and RbAg3Te2

The syntheses and structure determinations of CsAg₅Se₃ (I) and RbAg₃Te₂ (II) are reported. Both compounds were prepared by using supercritical ethylenediamine at 300°C for 6 days reacting alkali polychalcogenides with silver. For the compound I; tetragonal space group P4₂/mnm, a = 14.083(2)Å, c = 4.410(2)Å, V = 874.5(4)ų, Z = 4, D = 6.905 Mg/m³, MoK radiation, = 0.71073, = 27.493 mm^–1, F(000) = 1568, R = 0.022, Rw = 0.026 for 472 independent reflection. For compound II; monoclinic space group C2/m, a = 17.546(2)Å, b = 4.617(2)Å, c = 9.165(2)Å, = 113.04(2)°, V = 683.31(12)ų, Z = 2, D = 6.457 Mg/m³, MoK radiation, = 0.71073, = 23.825 mm^–1, F(000) = 1128, R = 0.019, Rw = 0.027 for 690 independent reflection.     

Acoustic Analysis Findings in Objective Laryngopharyngeal Reflux Patients

OBJECTIVE: The aim of this study was to identify the effects of objective laryngopharyngeal reflux (LPR) on the acoustic parameters of patients by comparing their voice samples with that of control subjects. STUDY DESIGN: Prospective study in two tertiary reference hospitals. METHODS: 48 consecutive patients with symptoms related to LPR and 64 control subjects were included in the study. Suspected LPR patients underwent a 24-hour ambulatory pH monitoring, and 25 (52%) of them were shown to have objective LPR. Acoustical evaluation results of objective LPR patients were compared with that of symptomatic LPR patients and control subjects. RESULTS: All frequency perturbation values obtained from objective and symptomatic LPR patients were higher than the control subjects (P<0.01). Mean fundamental frequency, amplitude perturbation measures, and noise-to-harmonics ratio were not significantly different between groups. CONCLUSION: LPR patients have significantly different frequency perturbation values than control subjects.     

Synthesis of room-temperature ionic liquids with the weakly coordinating [Al(ORF)4]- anion (RF=C(H)(CF3)2) and the determination of their principal physical properties

A large series of ionic liquids (ILs) based on the weakly coordinating alkoxyaluminate [Al(hfip)(4)](-) (hfip: hexafluoroisopropoxy) with classical as well as functionalized cations were prepared, and their principal physical properties determined. Melting points are between 0 ([C(4)MMIM][Al(hfip)(4)]) and 69 °C ([C(3)MPip][Al(hfip)(4)]); three qualify as room-temperature ILs (RTILs). Crystal structures for six ILs were determined; their structural parameters and anion-cation contacts are compared here with known ILs, with a special focus on their influence on physical properties. Moreover, the biodegradability of the compounds was investigated by using the closed-bottle and the manometric respirometry test. Temperature-dependent viscosities and conductivities were measured between 0 and 80 °C, and described by either the Vogel-Fulcher-Tammann (VFT) or the Arrhenius equations. Moreover, conductivities and viscosities were investigated in the context of the molecular volume, V(m). Physical property-V(m) correlations were carried out for various temperatures, and the temperature dependence of the molecular volume was analyzed by using crystal structure data and DFT calculations. The IL ionicity was investigated by Walden plots; according to this analysis, [Al(hfip)(4)](-) ILs may be classified as "very good to good ILs"; while [C(2)MIM][Al(hfip)(4)] is a better IL than [C(2)MIM][NTf(2)]. The dielectric constants of ten [Al(hfip)(4)](-) ILs were determined, and are unexpectedly high (ε(r)=11.5 to 16.8). This could be rationalized by considering additional calculated dipole moments of the structures frozen in the solid state by DFT. The determination of hydrogen gas solubility in [Al(hfip)(4)](-) RTILs by high-pressure NMR spectroscopy revealed very high hydrogen solubilities at 25 °C and 1 atm. These results indicate the significant potential of this class of ILs in manifold applications.     

Crystal structure and magnetic properties of dinuclear iron(III) complex with ONNO-donor ligand

A new dinuclear Fe(III) complex, [Fe(5-MeOL1)(OH)_0.86(CH₃O)_0.14]₂?2(CH₃OH), [H₂-5-MeOL1 = N,N′-bis(5-methoxy-2-hydroxybenzylidene)-2,2-dimethylpropane-1,3-diamine], 1 has been synthesized and characterized by single crystal structure analysis. The structure of 1 consists of two Fe(III) centers with one tetradentate schiff base ligand (N₂O₂) which are bridged by dihydroxo/dimethoxo groups to yield a Fe₂O₂ core. Complex 1 exhibits weak antiferromagnetic exchange interaction between Fe(III) ions with J = ?0.21 cm^–1.     

Cytotoxic and apoptotic activities of novel Pd(II) complexes against human leukemia cell lines in vitro

In the investigation for alternative chemotherapeutic strategies against leukemia, Pd(II) complexes were synthesized and investigated for cytotoxic and apoptotic properties on two human leukemia cell lines (HL-60 and K562). Pd(II) complexes (Pd-5a and Pd-6a) with 5a and 6a as ligands were synthesized and characterized by ¹H-NMR and F-TIR. The cytotoxicity of the compounds was quantified using MTT method. Bax, Bcl-2, and caspase 3 gene expression levels were estimated using RT-qPCR. Here we show that Pd(II) complexes have important cytotoxic activity on human leukemia cell lines. RT-qPCR indicated that Bax and caspase 3 gene expression levels were increased after 24 h treatment with Pd-5a and Pd-6a complexes in both HL-60 and K562 cells at some selected dose. Furthermore, Bcl-2 gene expression level decreased after 24 h treatment with Pd-5a and Pd-6a complexes in K562 cells at all selected dose. In HL-60 cells, only one selected Pd-5a dose (25 µM) decreased the gene expression level of Bcl-2. The results obtained in the present investigation indicate that these two newly synthesized Pd(II) complexes have apoptotic effects at appropriate doses through caspase 3 and Bax genes and might represent a novel potentially active agents for the management of human leukemia cell lines.     

Dual Metastability in Electroless Plating: Complex Inertness Enabling the Deposition of Composition-Tunable Platinum Copper Alloy Nanostructures

Autocatalytic deposition represents a facile, versatile, and scalable wet-chemical tool for nanofabrication. However, the intricate component interplay in plating baths containing multiple metal species impedes alloy deposition. We resolved this challenge in the bimetallic copper-platinum system by exploiting the kinetic stability of platinum complexes, which allows adjusting their ligand sphere and thus reactivity independently from the present copper ions in a preceding, thermally activated ligand exchange step. By using metastable Pt^IV precursors of varying degrees of complexation, copper-platinum alloys of adjustable atomic ratio were plated from solutions of identical composition and concentration, but differing local coordination environment. Due to its excellent conformity and nanoscale homogeneity, the reaction is compatible with ambitious 3D substrate morphologies, as demonstrated in the template-assisted fabrication of nanotubes with high aspect ratio. The ability to generate additional synthetic degrees of freedom by decoupling the metal complex speciation from the solution composition is of large interest for redox-chemical synthesis techniques, such as electrodeposition or nanoparticle colloid production.     

Various polycarbonate graft copolymers via diels–alder click reaction

In this work, we used Diels–Alder click reaction for the preparation of various types of aliphatic polycarbonates (PCs). We first prepared a novel anthracene‐functionalized cyclic carbonate monomer, anthracen‐9‐ylmethyl 5‐methyl‐2‐oxo‐1,3‐dioxane‐5‐carboxylate (2), followed by ring‐opening polymerization of this monomer to prepare PC with pendant anthracene groups (PC‐anthracene) using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU)/1‐(3,5‐bis(trifloromethyl)phenyl)‐3‐cyclohexylthiourea (TU) as the catalyst and benzyl alcohol as the initiator in CH₂Cl₂ at room temperature. Subsequently, the resulting PC‐anthracene (M_n,TDGPC = 6000 g/mol, M_w/M_n = 1.22) was grafted with a linear α‐furan protected‐maleimide terminated‐poly(methyl methacrylate) (PMMA‐MI) (M_n,GPC = 3100 g/mol, M_w/M_n = 1.31), or poly(ethylene glycol) (PEG‐MI) (M_n,GPC = 550 g/mol, M_w/M_n = 1.09), or a mixture of PMMA‐MI and PEG‐MI to yield well‐defined PC graft or hetero graft copolymers, PC‐g‐PMMA (M_n,TDGPC = 59000 g/mol, M_w/M_n = 1.22) or PC‐g‐PEG, or PC‐g‐(PMMA)‐co‐PC‐g‐(PEG) (M_n,TDGPC = 39900 g/mol, M_w/M_n = 1.16), respectively, using Diels–Alder click reaction in toluene at 110°C. The Diels–Alder grafting efficiencies were found to be over 97% using UV spectroscopy. Moreover, the structural analyses and the molecular weights of resulting graft copolymers were determined via ¹H NMR and triple detection GPC (TD‐GPC), respectively. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012