Photorefractive Four-Wave Mixing Switches Utilizing Pockels Effect -Longitudinal and Lateral Switches-

We carried out detailed calculations for photorefractive wave-mixing switches based on one of three crystals with high electro-optic coefficients, namely, BaTiO₃, Strontium Barium Niobate (SBN (0.75)), and Potasium Sodium Strontium Barium Niobate (KNSBN). A comparison of results for the three crystals shows that a 0_-cut BaTiO³ crystal is suitable for a longitudinal switch and requires a voltage of about 80 for a 2-mm-thick crystal to induce sufficient phase mismatch. The electrodes must be transparent for the incident and diffracted beams. A 45_-cut SBN (0.75) crystal, however, is suitable for a lateral switch and requires a voltage of about 150 for a 1-mm-wide crystal. The electrodes do not need to be transparent.     

Stark effects on the phosphorescence spectra of p-benzoquinone

Stark effects on the phosphorescence spectra of p-benzoquinone have been studied in naphthalene crystals at temperatures between 1.7 and 30 K. The experimental data establish that the band splitting of 24 cm^?1 arises from a double minimum potential in the T₁ state.     

A new synthetic route to 2-substituted naphtho[2,3-b]furan-4,9-dione2-Substituted Naphtho[2,3-b]furan-4,9-dione

4,9-Dimethoxynaphtho[2,3-b]furan 9 was obtained in 91% yield via the reductive methylation of naphtho[2,3-b]furan-4,9-dione 2 . After treatment of 9 with butyllithium, the mixture was allowed to react with N,N-dimethylacetamide, followed by oxidization with cerium(IV) diammonium nitrate to give 2-acetylnaphtho[2,3-b]furan-4,9-dione 1 . 2-Formylnaphtho[2,3-b]furan-4,9-dione 13 and 2-trimethylsilyl-naphtho[2,3-b]furan-4,9-dione 14 were also obtained from 9 by a similar method. The halodesilylations of 14 easily gave 2-iodonaphtho[2,3-b]furan-4,9-dione 16 , 2-bromonaphtho[2,3-b]furan-4,9-dione 17 , and 2-chloronaphtho[2,3-b]furan-4,9-dione 18 in 82%, and 93% and 83% yield, respectively. Furthermore, the nitrodesilylation of 14 gave 2-nitronaphtho[2,3-b]furan-4,9-dione 3 in 77% yield.     

Spongistatin synthetic studies. An efficient, second-generation construction of an advanced ABCD intermediate

[reaction: see text] A short, efficient, and stereocontrolled synthesis of (-)-4, an advanced ABCD subunit of the spongistatins, has been achieved. Central to the synthetic strategy is the multicomponent linchpin union of silyl dithianes with epoxides to access both the AB and CD fragments. Fragment coupling was then achieved via an efficient stereoselective aldol reaction. The linear sequence required 22 steps and proceeded in 4.0% overall yield.     

Effect of Headgroups on Small‐Ion Permeability across Archaea‐Inspired Tetraether Lipid Membranes

This paper examines the effects of four different polar headgroups on small‐ion membrane permeability from liposomes comprised of Archaea‐inspired glycerolmonoalkyl glycerol tetraether (GMGT) lipids. We found that the membrane‐leakage rate across GMGT lipid membranes varied by a factor of ≤1.6 as a function of headgroup structure. However, the leakage rates of small ions across membranes comprised of commercial bilayer‐forming 1‐palmitoyl‐2‐oleoyl‐sn‐glycerol (PO) lipids varied by as much as 32‐fold within the same series of headgroups. These results demonstrate that membrane leakage from GMGT lipids is less influenced by headgroup structure, making it possible to tailor the structure of the polar headgroups on GMGT lipids while retaining predictable leakage properties of membranes comprised of these tethered lipids.     

Pressure-Induced Solidification of 1-Butyl-3-methylimidazolium Tetrafluoroborate

We have used Raman spectroscopy to investigate the high-pressure phase behavior of 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), a representative ionic liquid, at pressures up to ~7.5 GPa. We have also studied how increasing pressure leads to conformational changes in the [bmim]⁺ cation. We have found that liquid [bmim][BF₄] undergoes pressure-induced solidification (freezing) into a superpressed (metastable) state at 2.5 GPa; another structural change probably occurs at ~6 GPa. Remarkably, conformational changes in the [bmim]⁺ cation between trans and gauche conformers are concordant with the metastable structural changes of [bmim][BF₄]. As the pressure is increased from ambient, the fraction of gauche conformers increases, but the gauche fraction decreases above the solidification pressure (2.5 GPa), and slope of the gauche/trans ratio changes again above 6 GPa. We interpret these results in terms of the fragility of the ionic liquid.     

Monte carlo simulations for blue-phase structure in liquid crystals

Blue-phase liquid crystals form three-dimensional structures in a self-organizing manner and are similar to living tissue structures such as the teeth of mice and collagen tissues. This study presents numerical results regarding the conditions under which blue-phase liquid crystals occur. The Monte Carlo simulations are performed by employing an improved Lennard–Jones potential that considers anisotropy and chirality. The conditions for the formation of the blue phase, which vary with respect to the chirality, are examined first. The relationship between the anisotropic parameters and the chiral parameter for the formation of the blue phase is discussed. Identical blue-phase structures are obtained, even when the cell size and molecular number are varied drastically. This discussion is useful for considering the scale-up problem, which is almost always a difficult issue for molecular-scale simulations.     

Sorption and diffusion of water vapor in polyimide films

Sorption and diffusion of water vapor are investigated gravimetrically for polyimide films. The activity dependence of the solubility and diffusion coefficients, S and D, respectively, is classified under four types: (1) constant S and D type, (2) dual-mode sorption and transport type, (3) dual-mode type followed by a deviation due to a plasticization effect at high vapor activity, and (4) constant S and D type followed by a deviation due to water cluster formation at high activity. For the dual-mode type, the Henry's law component is much larger than the Langmuir component except at low activity, and therefore deviation in behavior from the first type is small. S is larger for polyimides with higher content of polar groups such as carbonyl, carboxyl, and sulfonyl. D is larger for polyimides with a higher fraction of free space, with some exceptions. The polyimide from 3,3′,4,4′-biphenyltetracarboxylic dianhydride and dimethyl-3,7-diaminodibenzothiophene-5, 5-dioxide belongs to the third type and displays both large S and large D. The polyimide from 2,2-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride and 4,4′-oxydianiline belongs to the fourth type, and has the largest D but rather small S because of the hydrophobic C(CF₃)₂ groups. © 1992 John Wiley & Sons, Inc.