Kinetic determination of silver ion by its perturbation on Belousov-Zhabotinskii oscillating chemical reaction using potentiometric method.

Silver ion can perturb the Belousov-Zhabotinskii (B-Z) oscillating chemical reaction. Therefore, the B-Z oscillating system was applied in the determination of silver ion by using a platinum wire as an indicator electrode in the potentiometric method. The amplitude of the potentiometric oscillation increased linearly in proportion to [Ag+] in the range of 9.42 x 10(-6) M to 2.54 x 10(-4) M, with a correlation coefficient of 0.999 under the optimum conditions. The obtained LOD (2sigma) was 8.85 x 10(-6) M and the relative standard deviation (RSD) for five measurements of 1 x 10(-4) M silver ion was 5%. The influence of some potentially interference was also investigated.     

Diammonium Hydrogen Phosphate as an Efficient and Inexpensive Catalyst for the Synthesis of Bis(indolyl)methanes under Solvent-Free Conditions

Bis(indolyl)methanes were synthesized by the reaction of indole derivatives and aromatic and aliphatic aldehydes in the presence of diammonium hydrogen phosphate as a solid catalyst under solvent-free conditions. This methodology offers significant improvements for the synthesis of bis(indolyl)methanes with regard to the yield of products, simplicity in operation, and green aspects by avoiding toxic catalysts and solvents.     

Promising new catalytic properties of a Co (II)-carboxamide complex and its derived Co3O4 nanoparticles for the Mizoroki-Heck and the Epoxidation reactions

The new Co(II) - carboxamide complex ( 1 ) and Co₃O₄ nanoparticles ( 2 ), by way of thermal decomposition of ( 1 ) have been efficiently synthesised in the environment-friendly. X-ray diffraction reveals a slightly distorted octahedral coordination of cobalt (four nitrogens and two oxygens) in ( 1 ) and regular octahedral or tetrahedral ones (oxygens only) in ( 2 ). The investigation of ( 1 ) and ( 2 ) in the Mizoroki-Heck and epoxidation of alkens reactions showed them both to be powerful, green and inexpensive catalysts.     

A novel covalent functionalisation of poly (styrene-alt-maleic anhydride) with 4-amino benzo-9-crown-3 ether

The grafting of 4-amino benzo-9-crown-3 ether to poly (styrene-alt-maleic anhydride) has been described. The covalent grafting of crown ether has led to a considerable increase in the solubility of polymer in organic solvents such as dimethyl sulphoxide, dimethylformamide and tetrahydrofuran. The highest solubility was attained in DMF and DMSO. The covalently bonded 4-benzo-9-crown-3 ether allowed the hosting of Li⁺. The covalently grafted crown ether to polymer was identified by infrared spectroscopy and thermogravimetric analysis methods.     

Glucose Electro‐oxidation on Graphite Electrode Modified with Nickel/Chromium Nanoparticles

In this study, an available and inexpensive graphite substrate, was easily modified with Ni/Cr nanoparticles via electrodeposition technique in a very short time (3 min) and used as an electrocatalyst for glucose oxidation in alkaline solution. Graphite electrode modified with Ni/Cr nanoparticles demonstrated an outstanding electrocatalytic performance to glucose oxidation in comparison to examined Ni‐based electrodes or even different materials in other reports. It is noteworthy to mention that adding a little Cr led to a synergistic effect with Ni; accordingly, the presence of Cr not only resulted in a greater adsorption of glucose molecules by chromium oxide but also boosted conductivity of the nickel oxide because of the enhancement of Ni(III) amount. The electrochemical studies were performed by cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The morphology and structure of catalyst layer was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and energy dispersive x‐ray spectroscopy (EDS). The linear range of the electrode by cyclic voltammetry was between 2–31 mM with a high sensitivity of 2094 μA cm^?2 mM^?1. The repeatability and reproducibility of the proposed electrode was examined in glucose solution which were 0.3 % and 4.7 %, respectively. According to the low cost, ease and fast preparation, good repeatability and high sensitivity, this electrode can be a good candidate for nonenzymatic glucose oxidation.     

Hybrid thermal management of lithium-ion batteries using nanofluid,metal foam,and phase change material: an integrated numerical–experimental approach

Safety issues of Li-ion batteries imposed by unfavorable thermal behavior accentuate the need for efficient thermal management systems to prevent the runaway conditions. To that end, a hybrid thermal management system is designed and further investigated numerically and experimentally in the present study. The passive cooling system is fabricated by saturating copper foam with paraffin as the phase change material (PCM) and integrated with an active cooling system with alumina nanofluid as the coolant fluid. Results for various Reynolds numbers and different heating powers indicate that the hybrid nanofluid cooling system can successfully fulfill safe operation of the battery during stressful operating conditions. The maximum time in which all PCM field is changed to the liquid phase is defined as the onset of the stressful conditions. Therefore, the start time of stressful conditions at 41 W and Re 420 is increased from 3700 s with nanofluid composed of 1% volume fraction nanoparticles (VF-1%) to 4600 s with nanofluid VF-2% during high current discharge rates. Nanofluid cooling extends the operating time of the battery in comparison with the water-based cooling system with 200-s (nanofluid with volume fraction of 1%) and 900-s (nanofluid with volume fraction of 2%) increases in operating time at Reynolds of 420. Using nanofluid, instead of water, postpones the onset of paraffin phase transition effectively and prolongs its melting time which consequently leads to a decrease in the rate of temperature rise.

     

Zn(NO_3)_2·6H_2O/2,4,6-trichloro-1,3,5-triazine(TCT) a mild and selective system for nitration of phenols

<正>Certain phenols and naphthols were nitrated regioselectively with Zn(NO_3)_2·6H_2O/TCT in acetonitrile as solvent at room temperature and short reaction time in good yields.The reaction condition was mild.TCT is a cheap and commercially available reagent.It performed as an acid catalyst in this transformation.     

Study of the oxidation of some catechols in the presence of 4‐amino‐3‐thio‐1,2,4‐triazole by digital simulation of cyclic voltammograms

Electrochemical oxidation of catechol and its derivatives ( 1a–d ) has been studied in the presence of 4‐amino‐3‐thio‐1,2,4‐triazole ( 3 ) at various pHs. Some electrochemical techniques such as cyclic voltammetry using the diagnostic criteria derived by Nicholson and Shain for various electrode mechanisms and controlled‐potential coulometry were used. Results indicate the participation of catechols ( 1a–d ) with 3 in an intramolecular cyclization reaction to form the corresponding 1,2,4‐triazino[5,4‐b]‐1,3,4‐thiadiazine derivatives. In various scan rates, based on an electron transfer–chemical reaction–electron transfer–chemical reaction mechanism, the observed homogeneous rate constants (k_obs) for Michael addition reaction were estimated by comparing the experimental cyclic voltammetric responses with the digital simulated results. The oxidation reaction mechanism of catechols ( 1a–d ) in the presence of 4‐amino‐3‐thio‐1,2,4‐triazole ( 3 ) was also studied. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 340–345, 2007