Electrochemical detection of miRNA-222 by use of a magnetic bead-based bioassay

MicroRNAs (miRNAs, miRs) are naturally occurring small RNAs (approximately 22 nucleotides in length) that have critical functions in a variety of biological processes, including tumorigenesis. They are an important target for detection technology for future medical diagnostics. In this paper we report an electrochemical method for miRNA detection based on paramagnetic beads and enzyme amplification. In particular, miR 222 was chosen as model sequence, because of its involvement in brain, lung, and liver cancers. The proposed bioassay is based on biotinylated DNA capture probes immobilized on streptavidin-coated paramagnetic beads. Total RNA was extracted from the cell sample, enriched for small RNA, biotinylated, and then hybridized with the capture probe on the beads. The beads were then incubated with streptavidin–alkaline phosphatase and exposed to the appropriate enzymatic substrate. The product of the enzymatic reaction was electrochemically monitored. The assay was finally tested with a compact microfluidic device which enables multiplexed analysis of eight different samples with a detection limit of 7 pmol L^?1 and RSD?=?15 %. RNA samples from non-small-cell lung cancer and glioblastoma cell lines were also analyzed.     

Nickel nanostructured materials from liquid phase photodeposition

Liquid Phase Photo-Deposition (LPPD) technique has been used to obtain both colloidal particles and thin films of metallic and chloride nickel from solutions of only precursor Ni(acac)₂ (acac=2,4-pentandionato). Metallic nickel was obtained from ethanol solutions by direct nickel(II) photoreduction at 254 nm and by acetone sensitised reaction at 300 nm. In this latter process the rate was higher than in the first one. NiCl₂ was formed from CCl₄ solution by a solvent-initiated reaction. TEM analysis, performed on colloidal particles of nickel, showed that their dimensions are in the range 2–4 nm. The films did not present carbon contamination and were characterized by AFM, XPS and GIXRD. Metallic films consisted of particles of 20–40 nm that are the result of the aggregation of smaller crystallites (4–5 nm). Larger agglomerations (around 200 nm) have been observed for NiCl₂ films.     

The early oxynitridation stages of hydrogen-terminated (100) silicon after exposure to N2:N2O. Nitrogen bonding states

Nitridation of hydrogen-terminated silicon in a diluted N₂:N₂O atmosphere was studied by X-ray photoemission spectroscopy and high-resolution electron microscopy. Our analysis showed that the broad N(1s) peak of width 1.5 eV at 398–399 eV, usually reported in the literature, is preceded by the formation of a narrow peak of width around 1.0 eV at 397.5 eV, attributed to the moiety Si₃N in which silicon is only marginally oxidized, and two other peaks at 400.0 eV and 401.5 eV, attributed to the moieties Si₂NOSi and SiNO, respectively. Received: 11 July 2001 / Accepted: 19 September 2001 / Published online: 20 December 2001     

Similar Structural Dynamics for the Degradation of CH3NH3PbI3 in Air and in Vacuum

We investigate the degradation path of MAPbI₃ (MA=methylammonium) films over flat TiO₂ substrates at room temperature by means of X‐ray diffraction, spectroscopic ellipsometry, X‐ray photoelectron spectroscopy, and high‐resolution transmission electron microscopy. The degradation dynamics is found to be similar in air and under vacuum conditions, which leads to the conclusion that the occurrence of intrinsic thermodynamic mechanisms is not necessarily linked to humidity. The process has an early stage, which drives the starting tetragonal lattice in the direction of a cubic atomic arrangement. This early stage is followed by a phase change towards PbI₂. We describe how this degradation product is structurally coupled with the original MAPbI₃ lattice through the orientation of its constituent PbI₆ octahedra. Our results suggest a slight octahedral rearrangement after volatilization of HI+CH₃NH₂ or MAI, with a relatively low energy cost. Our experiments also clarify why reducing the interfaces and internal defects in the perovskite lattice enhances the stability of the material.     

Synthesis, characterization and application of Ni(tta)2.tmeda to MOCVD of nickel oxide thin films

A novel nickel beta-diketonate adduct, Ni(tta)2.tmeda, has been synthesized using 2-thenoyltrifluoroacetone as the beta-diketonate and N,N,N,'N'-tetramethylethylendiamine as the Lewis base. It has been characterized by elemental analyses, IR, 1H NMR, 13C NMR spectroscopy and single-crystal X-ray diffraction studies. Physical and thermal properties of Ni(tta)2.tmeda precursor have been also extensively investigated. Its efficacy as a metal-organic chemical vapour deposition (MOCVD) precursor for the growth of nickel oxide films has been fully tested by applying it to the deposition of NiO films on quartz substrate. NiO thin films have been characterized by X-ray diffraction (XRD), scanning electron microscopy and UV spectroscopy.     

One pot grafting of tetrairon(III) single molecule magnets on silicon

Herein we report on the Si grafting of two Fe₄ derivatives, [Fe₄(Lⁱ)₂(tmhd)₆], in which tmhd is 2,2,6,6-tetramethylheptane-3,5-dionate and H₃Lⁱ = R–C(CH₂OH)₃ is a tripodal ligand with R = CH₂CH–CH₂–O–CH₂ (H₃L¹) and CH₂CH–(CH₂)₉–O–CH₂ (H₃L²). These complexes were specifically designed to be directly anchored on the H-terminated silicon surface via the hydrosilylation reaction. The complexes were grafted by a one pot route based on the photoinduced hydrosilylation followed by a ligand exchange step in the same reaction solution. The resulting decorated surfaces were characterized using X-ray photoelectron spectroscopy (XPS), attenuated total reflection infrared spectroscopy (ATR-IR) and atomic force microscopy (AFM).     

Cavitand-functionalized porous silicon as an active surface for organophosphorus vapor detection

This paper reports on the preparation of a porous silicon-based material covalently functionalized with cavitand receptors suited for the detection of organophosphorus vapors. Two different isomeric cavitands, both containing one acid group at the upper rim, specifically designed for covalent anchoring on silicon, were grafted on H-terminated porous silicon (PSi) by thermal hydrosilylation. The covalently functionalized surfaces and their complexation properties were characterized by combining different analytical techniques, namely X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), and mass spectroscopy analysis coupled with thermal desorption experiments. Complexation experiments were performed by exposing both active surfaces and a control surface consisting of PSi functionalized with a structurally similar but inactive methylene-bridged cavitand (MeCav) to dimethyl methylphosphonate (DMMP) vapors. Comparison between active and inactive surfaces demonstrated the recognition properties of the new surfaces. Finally, the nature of the involved interactions, the energetic differences between active and inactive surfaces toward DMMP complexation, and the comparison with a true nerve gas agent (sarin) were studied by DFT modeling. The results revealed the successful grafting reaction, the specific host-guest interactions of the PSi-bonded receptors, and the reversibility of the guest complexation.     

Structural and morphological properties of ultrathin YBCO films grown on single-crystal substrates

Summary Epitaxial (001)-oriented ultrathin YBCO films of different thicknesses are deposited by Inverted Cylindrical Magnetron Sputtering (ICMS) on (100) MgO single-crystal substrates. The mean films stoichiometry is determined by Rutherford Backscattering (RBS). Auger Electron Spectroscopy (AES), X-ray Photoemission Spectroscopy (XPS) and Scanning Electron Microscopy (SEM) are employed in order to analyse film growth, and identify spurious phases present in the samples. Paper presented at the ?VII Congresso SATT?, Torino, 4–7 October 1994.     

The early oxynitridation stages of hydrogen-terminated (100) silicon after exposure to N2:N2O. III. Initial conditions

The structure and thermal stability in N₂ of hydrogen-terminated (100) silicon has been studied by X-ray photoemission spectroscopy, transmission electron microscopy, atomic force microscopy, thermal programmed desorption, and reflection high energy electron diffraction. Device-quality surfaces were prepared in an open-chamber reactor by exposing single crystalline, (100) oriented silicon to H₂ at high temperature (850 °C or 1100 °C) for durations on the order of 10² s. The observed stability with respect to N₂ at 850 °C is inconsistent with the reported desorption kinetics and may be accounted for in terms of either physico-chemical properties of the system (e.g., the presence of a buried layer of H₂ or of hydrogen-decorated vacancies whose out-diffusion restores the hydrogen terminations on the surface) or the reactor (persistence of hydrogen in the atmosphere even after switching it off). The nitridation by N₂ of hydrogen-terminated silicon is less efficient (per unit exposure) than that by N₂O by 4 orders of magnitude. PACS 68.35.Dv; 68.35.Fx; 82.65.Dp; 79.60.Jv; 81.60.Cp