Solid-state electrode with a Cu(I)-based membrane hydrophobised by PTFE for the measurement of Cu2+ and I?

The preparation of CuI + Ag₂S and Cu₂[HgI₄] + Ag₂S membranes hydrophobised by PTFE is described. The pressed membranes mounted in a multi-purpose all-solid-state electrode body have been examined as electrochemical sensors for Cu²⁺ and I^– ions. For the electrode with (CuI + Ag₂S + PTFE)-membrane experimental slopes of 29 mV(pCu)^–1 and 62 mV(pI)^–1 were obtained, in good agreement with the theoretical values. For practical measurement in solutions where both Cu²⁺ and I^– can be present, the investigated electrode offers certain advantages in comparison with a commercial Cu-ISE.     

Provenance studies of obsidian artifacts: Trace elements analysis and data reduction

Iron and trace elements, such as rare-earth elements, scandium, rubidium, cesium, tantalum, thorium and uranium were determined by instrumental neutron activation analysis in geological samples of obsidian rocks from the Mediterranean Area and in obsidian artifacts found in some prehistorical human settlements in Italy. REE patterns and discriminant analysis allow a firm identification of the source material of artifacts, thus confirming and implementing fission track data of the same artifacts and rocks on the origin of the obsidian rock used to mould the artifacts.     

2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol as a reagent for the spectrophotometric determination of La(III), Y(III), and Ce(III)

The complexes of the reagent 5-Br-PADAP with the metal ions La(III), Ce(III), and Y(III) have been studied.The composition and stability of these complexes have been determined. A sensitive spectrophotometric procedure for the determination of the metal ions La(III), Ce(III), and Y(III) has been proposed. The limitations of this procedure and the effect of other ions have been studied.     

Cathodic adsorptive stripping square-wave voltammetry of the anti-inflammatory drug meloxicam

The adsorptive behavior of the anti-inflammatory drug meloxicam was studied by cyclic, differentia-pulse and square-wave voltammetry on a hanging mercury drop electrode (HMDE). The drug was accumulated at HMDE and a well-defined stripping peak current was obtained at -1.42 V vs. Ag/AgCl (saturated KCl) electrode in acetate buffer solution (pH 5.0). A voltammetric procedure was developed for the determination of meloxicam using square-wave cathodic adsorptive stripping voltammetry (SW-CASV). The optimum working conditions for the determination of the drug were established. The analysis of meloxicam in human plasma was carried out satisfactorily.     

Potentiometric response of a commercial (Ag2S+PbS)-membrane selective electrode to Hg(II) in aqueous solution

Summary The preparation and performance of an Hg(II)-ISE are described. The analytical behaviour of this electrode, made by chemical treatment of a commercial silver sulphide type Pb(II)-ISE, is discussed in terms of potentialvs. concentration curves, potentialvs. pH curves, and selectivity. The response to fixed c_Hg(II) as the pH is increased in the alkaline region corresponds to decrease in the free Hg²⁺concentration down to pHg 17. The estimated limit of detection of total Hg(II) concentration is 10^–5 M.

---

Potentiometrisches Verhalten einer handelsüblichen (Ag₂S+PbS)-Membran-Elektrode gegenüber Hg(tt) in wäßriger Lösung

Zusammenfassung Herstellung und Wirkungsweise einer gegen Hg(II) ionenselektiven Elektrode wurde beschrieben. Das analytische Verhalten dieser Elektrode, die sich durch chemische Behandlung einer handelsüblichen Silbersulfidelektrode, die für Pb(II)-Ionen selektiv ist, herstellen läßt, wurde an Hand von Potential-Konzentrationskurven, Potential-pH-Kurven und ihrer Selektivität diskutiert. Das Verhalten gegenüber fixemc _Hg(ii)bei Anstieg des pH ins alkalische Gebiet korrespondiert mit der Abnahme der Konzentration an freien Hg²⁺-ionen bis herab zu pHg 17. Die Nachweisgrenze liegt schätzungsweise bei einer totalen Hg(II)-Konzentration von 10^–5 M.

---

---

Presented at the Fifth European Conference on Analytical Chemistry (EUROANALYSIS-V), Cracow, Poland, 26–31 August, 1984.     

Solid-state electrode with a Cu(I)-based membrane hydrophobised by PTFE for the measurement of Cu2+ and I−

The preparation of CuI + Ag₂S and Cu₂[HgI₄] + Ag₂S membranes hydrophobised by PTFE is described. The pressed membranes mounted in a multi-purpose “all-solid-state” electrode body have been examined as electrochemical sensors for Cu²⁺ and I^? ions. For the electrode with (CuI + Ag₂S + PTFE)-membrane experimental slopes of 29 mV(pCu)^?1 and 62 mV(pI)^?1 were obtained, in good agreement with the theoretical values. For practical measurement in solutions where both Cu²⁺ and I^? can be present, the investigated electrode offers certain advantages in comparison with a commercial Cu-ISE.     

Accumulation and trace measurement of chloroquine drug at DNA-modified carbon paste electrode

The voltammetric behaviour of chloroquine was investigated at carbon paste and dsDNA-modified carbon paste electrodes in different buffer systems over a wide pH range using cyclic and differential pulse voltammetry. Chloroquine was oxidized in the pH range 2.0-11.0 yielding one irreversible main oxidation peak. A second peak was also observed only in the pH range 5.0-7.0. The modification of the carbon paste surface with dsDNA allowed a preconcentration process to take place for chloroquine such that higher sensitivity was achieved as compared with the bare surface. The response was characterized with respect to solution pH, ionic strength, accumulation time and potential, chloroquine concentration, and other variables. Stripping voltammetric response showed a linear calibration curve in the range 1.0 × 10⁻⁷ to 1.0 × 10⁻⁵ mol l⁻¹ with a detection limit of 3.0 × 10⁻⁸ mol l⁻¹ at the dsDNA-modified electrode. Application of the modified electrode to serum, without sample pretreatment, resulted in good recovery higher than 95% and the higher standard deviation was 3.0%.     

Electrochemical study of zolpidem at glassy carbon electrode and its determination in a tablet dosage form by differential pulse voltammetry

The oxidative behaviour of, a hypnotic drug, zolpidem was studied at glassy carbon electrode in Britton-Robinson buffer over the pH range 2.0-11.0 using cyclic, linear sweep and differential pulse voltammetry. Oxidation of the drug was effected in a single irreversible, diffusion-controlled step. Using differential pulse voltammetry (DPV), the drug yielded a well-defined voltammetric response in Britton-Robinson buffer, pH 8.0 at +0.889 V (vs. Ag/AgCl) on glassy carbon electrode. This process could be used to determine zolpidem concentrations in the range 5.0 x 10(-7) M to 1.0 x 10(-5) M with a detection limit of 2.0 x 10(-7) M. The method was applied, without any interference from the excipients, to the determination of the drug in a tablet dosage form.     

Surface Modification of Porous Silica with Bi-thiophene Tripodal Ligand and Aplication to Adsorption of Toxic Metal Cations

The immobilization of a thiophene-based tripodal ligand, with a donor sulfur, on the surface of an epoxide group containing a silica gel phase for the synthesis of a newly functionalized material based on porous silica-bound bi-thiophene tripodal ligand (SGBT) is described. The modified silica surface was characterized by ¹³C NMR of a solid sample, elemental analysis, and infrared spectra. This new material was also studied and evaluated by determination of the surface area using the BET equation, the adsorption and desorption capability using the isotherm of nitrogen and BJH pore sizes, respectively. The target material exhibits good thermal stability as determined by thermogravimetry curves. The synthesized material was utilized in column and batch methods for adsorption of Hg²⁺, Cd²⁺, Pb²⁺, Cu²⁺, Zn²⁺, K⁺, Na⁺, and Li⁺, and the material exhibits an affinity only towards toxic heavy metals.