The Pharmacokinetic Profiles of Pre-Operative Prophylactic Cefepime Application in Pregnant and Non-Pregnant Women Undergoing Surgical Interventions Using a Fully Validated Liquid Chromatographic Method

Pregnancy alters pharmacokinetic profile of many drugs, because of altering body volume and metabolism rate. Therefore, dosage rates and concentrations of drugs must be controlled during pregnancy. Here, we identified the pharmacokinetic profile of pre-operatively given cefepime in caesarean section and gynecological operations using a simple, rapid, cost-effective and valid liquid chromatographic method. The chromatographic separation was performed using 40 mM, pH 3.2 phosphate buffer containing 6 % methanol as mobile phase at 0.30 mL min^?1 flow rate. Gradient elution with methanol was applied to get shorter analysis time without any interference from plasma endogens. During analyses, temperature of column, autosampler and detector were set as 30, 10 and 40 °C, respectively. The detection wavelength was 260 nm and ceftizoxime was used as internal standard. At the optimum conditions, the cefepime analysis from plasma samples was completed in 7 min. Cefepime was extracted from plasma samples using perchloric acid with a very high recovery rate (99.3 %). The method was fully validated according to the Food and Drug Administration guidelines for bioanalytical method validation, and found to be selective, linear, repeatable, reproducible and robust. After validation studies, the method was applied to five caesarean-sectioned and four non-pregnant sectioned women treated with pre-operative, prophylactic single intravenous dose of cefepime (1 g Maxipime^®) in order to determine pharmacokinetic profile of cefepime. Peak serum concentrations of cefepime in caesarean-sectioned women at the arterial port after infusion was 70.11 ± 10.74 μg mL^?1. The mean elimination half-life, volume of distribution and calculated area under the concentration–time curve (AUC)_0–∞ were 1.10 ± 0.23 h, 14.22 ± 2.29 L and 101.55 ± 10.99 μg h mL^?1 for caesarean-sectioned women; and 1.14 ± 0.21 h, 14.76 ± 2.92 L and 104.71 ± 36.34 μg h mL^?1 for non-pregnant sectioned women, respectively. The area under curve, elimination half-life, maximum plasma concentration and the mean distribution volume of cefepime were not changed in case of pregnancy.     

A structural analysis of ultrathin barrier (In)AlN/GaN heterostructures for GaN-based high-frequency power electronics

Metal–organic chemical vapor deposition (MOCVD) is one of the best growth methods for GaN-based materials as well-known. GaN-based materials with very quality are grown the MOCVD, so we used this growth technique to grow InAlN/GaN and AlN/GaN heterostructures in this study. The structural and surface properties of ultrathin barrier AlN/GaN and InAlN/GaN heterostructures are studied by X-ray diffraction (XRD) and atomic force microscopy (AFM) measurements. Screw, edge, and total dislocation densities for the grown samples have been calculated by using XRD results. The lowest dislocation density is found to be 1.69 × 10⁸ cm⁻² for Sample B with a lattice-matched In_0.17Al_0.83N barrier. The crystal quality of the studied samples is determined using (002) symmetric and (102) asymmetric diffractions of the GaN material. In terms of the surface roughness, although reference sample has a lower value as 0.27 nm of root mean square values (RMS), Sample A with 4-nm AlN barrier layer exhibits the highest rough surface as 1.52 nm of RMS. The structural quality of the studied samples is significantly affected by the barrier layer thickness. The obtained structural properties of the samples are very important for potential applications like high-electron mobility transistors (HEMTs).     

Comparing Singlet Oxygen Generation of Schiff Base Substituted Novel Silicon Phthalocyanines by Sonophotochemical and Photochemical Applications

Although the sonophotodynamic method has an effective therapeutic outcome for anticancer treatment compared with the photodynamic method, there are not enough related studies in the literature and this study aims to contribute to the development of sonophotodynamic studies. For this purpose, the Schiff base substituted silicon phthalocyanines were designed and synthesized as effective sensitizer candidates and the photophysicochemical and sonophotochemical features of the phthalocyanines were examined to increase singlet oxygen efficiency. The calculated Φ_Δ values indicate that the contribution of substituent groups improved the production of singlet oxygen compared with silicon (IV) phthalocyanine dichloride (SiPcCI₂) and also the sonophotochemical applications increased the singlet oxygen yields. The Φ_Δ values (Φ_Δ = 0.76 for axially bis-{4-[(E)-(pyridin-3-ylimino)methyl]phenol} substituted silicon (IV) phthalocyanine ( 2a ), 0.68 for axially bis-4-[(E)-{[(pyridin-3-yl)methyl]imino}methyl]phenol substituted silicon (IV) phthalocyanine ( 2b ) in photochemical study) reached to Φ_Δ = 0.98 for 2a , 0.94 for 2b in sonophotochemical study. This article will enrich the literature on increasing singlet oxygen yield.     

Investigation of equilibrium, kinetic, thermodynamic and mechanism of Basic Blue 16 adsorption by montmorillonitic clay

The adsorption of a cationic dye, Basic Blue 16 (BB16), by montmorillonitic clay was studied in detail. Changes in the molecular structure during adsorption were analyzed by FTIR spectroscopy. BB16 adsorption onto the clay mainly results from hydrogen bonding between OH and NH₂ groups of dye molecules and OH groups of clay and electrostatic interaction between the negatively charged clay surface and cationic dye. The montmorillonitic clay dose had an inverse effect on the adsorption performance, while the highest dye removal was 305 mg/g at pH 3.6. An increase in temperature and dye concentration positively enhanced the adsorption capacity of the montmorillonitic clay. Temperature had no effect on the adsorption at a dye concentration less than 500 mg/L, while dye adsorption was positively enhanced at elevated dye concentrations. Three-parameter equations provided higher better fitting than two-parameter equations while the Freundlich model had the highest correlation coefficient and the lowest error values with experimental data. The BB16 adsorption was well followed by pseudo-second order model and the rate of adsorption process was controlled by surface and intraparticle diffusion. Thermodynamic evaluations revealed that the adsorption process was spontaneous and endothermic, while the randomness increased during adsorption. Experimental results indicate that montmorillonitic clay from Eskisehir is a promising adsorbent for the removal of cationic dye molecules from aqueous solutions.     

The impact of an out‐of‐school STEM education program on students’ attitudes toward STEM and STEM careers

There is an increasing awareness of out‐of‐school program value in enhancing student interest and understanding of science, technology, engineering, and mathematics (STEM). This study examined the impact of an out‐of‐school STEM education program on student attitudes toward STEM disciplines and STEM careers. A STEM education program implemented at a public research university was designed to integrate STEM disciplines with hands‐on problem‐based activities. Design features included authentic learning contexts, engineering design processes, and content integration. Data sources included an attitude survey and interviews conducted with forty sixth grade middle school student participants. The analysis revealed significant differences between pre and posttests on student attitudes toward personal and social implications of STEM, science and engineering learning, and their relationship to STEM. Findings showed that the program contributed to students’ developing interest in STEM fields, and helped them make connections between schoolwork and daily lives. Recommendations for future research on out‐of‐school STEM education programs were discussed.     

Novel peripherally substituted zinc phthalocyanine: synthesis,characterization, investigation of photophysicochemical properties and theoretical study

The new thiohexanoic acid substituted zinc phthalocyanine was synthesized and characterized by FT-IR, ¹H–NMR, electronic spectroscopy, and mass spectrometry as well as DFT calculation studies. The photochemical properties (singlet-oxygen quantum yields and photodegradation quantum yields) and photophysical properties (fluorescence quantum yields and fluorescence behavior) of the compound were studied in dimethylsulfoxide (DMSO), dimethylformamide (DMF) and tetrahydrofuran (THF). Singlet-oxygen quantum yields ranged from 0.29 to 0.43. However, energy-minimized structure, vibrational frequency, electronic distribution and molecular orbitals were obtained by DFT calculations which were supported by experimental results.     

2H-Indazolo[2,1-b]phthalazine-trione derivatives: Inhibition on some metabolic enzymes and molecular docking studies

In this study, substituted 2H-indazolo[2,1-b]phthalazine-1,6,11-trione compounds ( 4a–d ) obtained via one-pot three-component condensation reaction of aromatic aldehydes, cyclic 1,3-dione, and phthalhydrazide in ethanol catalyzed by Y(OTf)₃ showed satisfactory inhibitory effects against some important enzymes. Also, these molecules had K_i values in the row of 185.92 ± 36.03-294.82 ± 50.76 nM vs carbonic anhydrase I (CA I), 204.93 ± 46.90-374.10 ± 83.63 nM against human CA II, 937.16 ± 205.82-1021.83 ± 193.66 nM against α-glycosidase (α-Gly), respectively. For cholinesterase enzymes, the K_i values were found in the range of 47.26 ± 9.62-72.05 ± 19.47 nM against acetylcholinesterase (AChE) and 65.03 ± 9.88-102.83 ± 25.04 nM against butyrylcholinesterase (BChE), respectively. The inhibition effects of these compounds against enzymes whose name are AChE, BChE, α-Gly, hCA I, and hCA II, were compared with control molecules like tacrine, acarbose, and acetazolamide.     

Controlled deposition of structured polymer films: chemical and rheological factors in chitosan film formation

The technique of "spread coating" has been used to create thin films from solutions of deacetylated and butyl-modified chitosan polymer, and the effect of deposition rate on film thickness has been characterized. Results show that films of controlled thickness can be reproducibly produced and that hydrophobic modification of the polymer can extend the range over which a linear response between film thickness and deposition rate is achieved. Viscometry and fluorescence spectroscopy were also employed to characterize the micellar characteristics of solutions of both deacetylated and butyl-modified chitosan polymer. Although both deacetylated and butyl-modified chitosan solutions were found to have inter- and intramolecular interactions, as well as hydrophobic domains able to incorporate fluorophores, deacetylated chitosan was found to be more interconnected via intermolecular interactions at higher concentrations. These results are important as having the ability to understand how the introduction of hydrophobic modification, a technique shown to introduce solution-based micelle structure and micellar aggregates that support enzyme immobilization, affects film thickness and morphology of spread coated thin films will aid the long-term development and deployment of chitosan-based biofuel cell electrodes.     

Simultaneous multiresponse optimization of an HPLC method to separate seven cephalosporins in plasma and amniotic fluid: Application to validation and quantification of cefepime, cefixime and cefoperazone

An HPLC method for the separation of seven cephalosporins [Cefepime (CEP), ceftazidime (CTA), ceftizaxime (CTI), ceftriaxone (CTR), cefotaxime (COT), cefixime (CIX) and cefoperazone (COP)] in human plasma and amniotic fluid has been developed. Optimization of the chromatographic method was performed in three steps: a series of initial experiments followed by two sets of experiments based on different experimental designs. The initial experiments were performed to decide the basic analytical requirements of the method. Then screening experiment fractional factorial design was used in order to decrease the number of parameters by eliminating parameters which having insignificant effect on responses. The parameters having significant effect were further optimized through a full factorial design. Having studied two responses (retention times and resolutions), a desirability function that assess the responses together, was used to find experimental conditions where the system generated desirable results. The desirable results were obtained with XTerra C18 (250 mm × 4.6 mm, 5 μm i.d.) column, 40 mM phosphate buffer, pH 3.2, 18% MeOH, 0.85 mL min⁻¹ flow rate and 32 °C column temperature. Gradient elution with MeOH was applied. A simple and efficient solid-phase extraction was applied for the preparation of plasma and amniotic fluid samples. The validation parameters of the method were evaluated in accordance with ICH guideline. The method validated was applied to the analysis of CEP and COP in maternal venous, fetal venous and fetal arterial plasma, and to the analysis of CIX in maternal venous plasma and amniotic fluid.