Simple and Precise Quantification of Iron Catalyst Content in Carbon Nanotubes Using UV/Visible Spectroscopy

Iron catalysts have been used widely for the mass production of carbon nanotubes (CNTs) with high yield. In this study, UV/visible spectroscopy was used to determine the Fe catalyst content in CNTs using a colorimetric technique. Fe ions in solution form red–orange complexes with 1,10-phenanthroline, producing an absorption peak at λ=510 nm, the intensity of which is proportional to the solution Fe concentration. A series of standard Fe solutions were formulated to establish the relationship between optical absorbance and Fe concentration. Many Fe catalysts were microscopically observed to be encased by graphitic layers, thus preventing their extraction. Fe catalyst dissolution from CNTs was investigated with various single and mixed acids, and Fe concentration was found to be highest with CNTs being held at reflux in HClO₄/HNO₃ and H₂SO₄/HNO₃ mixtures. This novel colorimetric method to measure Fe concentrations by UV/Vis spectroscopy was validated by inductively coupled plasma optical emission spectroscopy, indicating its reliability and applicability to asses Fe content in CNTs.     

Fluorimetric determination of beryllium with pyridoxal-5-phosphate

A simple, rapid and selective method for the determination of beryllium with pyridoxal-5-phosphate has been developed. The system is only fluorescent (lambda(ex) 360, lambda(em) 460 nm) in the presence of a nitrogenous base such as ammonia, ethylenediamine or pyridine, owing to the possible formation of a ternary complex. The calibration graph is linear over the range 8-60 ng ml . The high selectivity of the method permits the determination of beryllium in various types of alloys.     

Fluorimetric determination of sulphate by ternary complex formation with zirconium and biacetylmonoxime nicotinylhydrazone

A fluorimetric procedure for the determination of sulphate (0.5-6 mug ml ) based on the formation of a ternary complex with biacetylmonoxime nicotinylhydrazone and zirconium(IV) is described. The excitation and fluorescence maxima are at 415 and 505 nm, respectively. The method is rapid and the procedure reproducible. The precision is +/- 2% near to the middle range of the calibration curves. There is no interference from most common ions. Phosphate and fluoride are tolerated at 100-fold molar ratio to sulphate. The method has been applied to the determination of sulphate in a variety of water samples.     

Modular stopped-flow/diode-array detection system for simultaneous kinetic analysis

The coupling of a stopped-flow module to a diode-array spectrophotometric detector has been exploited for the simultaneous kinetic resolution of mixtures. The analytical possibilities are shown with the resolution of a mixture of two analytes (hydrazine and phenylhydrazine), yielding products with different spectral features (after reaction with p-dimethylaminobenzaldehyde), so that only the simultaneous measurement of their respective initial rates at their corresponding maximum absorption wavelengths is possible. The method allows 0.02–30 μg ml^?1 hydrazine and 8–2200 μg ml^?1 phenylhydrazine to be determined simultaneously.     

Determination of decabromodiphenyl ether in sediments using selective pressurized liquid extraction followed by GC–NCI-MS

A method based on selective pressurized liquid extraction (SPLE) followed by gas chromatography–negative ion chemical ionization-mass spectrometry (GC–NCI-MS) has been evaluated for analysis of decabromodiphenyl ether (PBDE-209) in sediment samples. Instrumental operating conditions such as source temperature and system pressure were optimized in the NCI-MS system, giving an instrumental detection limit of 2 pg. The limit of determination of the entire SPLE–GC–NCI-MS procedure was around 50 pg g^–1 dry weight (dw), with repeatability of replicates between 4 and 21% relative standard deviation. Application of the method to 13 different river and marine sediment samples collected in Spain revealed that levels of decabromodiphenyl ether ranged between 2 and 132 ng g^–1 dry weight.     

Simultaneous determination of histamine and spermidine by second-derivative synchronous fluorescence spectrometry

The method is based on formation of the fluorescent condensation products with o-phthaldialdehyde; 0.5–2000 ng ml^?1 histamine and 3–700 ng ml^?1 spermidine can be quantified, with relative standard deviations of 2–3%. Histamine/spermidine ratios of 2.5:1–1:30 can be handled. A selectivity study is reported.     

The stopped-flow technique in analytical chemistry

A critical survey of the stopped-flow technique is presented. The instrumentation typically used and the scope of its analytical applications are discussed. The stare-of-the-art of this technique and its wide possibilities in routine analyses are also considered.     

Synthesis of Nature‐Inspired Medium‐Sized Fused Heterocycles from Amino Acids

Herein, we describe the synthesis of molecular scaffolds consisting of medium‐sized fused heterocycles using amino acids, which are some of the most useful building blocks used by nature as well as chemists to create structural diversity. The acyclic precursors were assembled by using traditional Merrifield solid‐phase peptide synthesis, and cyclization was carried out through acid‐mediated tandem endocyclic N‐acyliminium ion formation, followed by nucleophilic addition with internal nucleophiles. The synthesis of molecular scaffolds consisting of seven‐, eight‐, and nine‐membered rings proceeded with full stereocontrol of the newly generated stereogenic center in most cases.     

Upper bound for the magnetic force gradient in graphite

In this work we investigate possible ferromagnetic order on the graphite surface by using magnetic force microscopy (MFM). Our data show that the tip-sample interaction along the steps is independent of an external magnetic field. Moreover, by combining kelvin probe force microscopy and MFM, we are able to separate the electrostatic and magnetic interactions along the steps obtaining an upper bound for the magnetic force gradient of 16 μN/m. Our experiments suggest the absence of ferromagnetic signal in graphite at room temperature.     

Synthesis and Properties of Dendronized Chitosan

Summary: Chitosan films and microspheres were prepared and their surfaces were functionalized with first generation dendritic molecules. The films were modified by Weisocyanate dendron, while Behera's and bis Behera's amine dendrons were used to modify the microspheres. Prior to dendronization films were prepared by blending chitosan with 18% of polyvinyl pyrrolidone (PVP), and casting the resulting mixture. The degree of dendronization reached was 28%. The microspheres were prepared by coacervation/precipitation, after which the surfaces were activated with either epychlorohydrine (ECH) or 1,4-butanediol diglycidyl ether (BDGE). The oxirane groups were utilized to form covalent bonds between chitosan and dendrons. The degree of dendronization yielded with Behera's amine was 60% for both activating agents. When bis Behera's amine was used, the dendronization reached values of 15 and 21% when ECH or BDGE were used, respectively. The dendronized products were characterized through spectroscopic and microscopic studies and by determination of swelling indexes. Only one of the surfaces was dendronized in every film, which therefore presented a hydrophobic and a hydrophilic surface. Since these films maintain the properties of chitosan, they offer interesting potential as dressings for exuding wounds. The different surfaces make the microspheres potentially applicable as carriers for delivery and controlled release of drugs.