Co-extraction of water vapor and helium from natural gas

A study of the sorption properties of a composite sorbent prepared from pseudoboehmite and synthetic sodium-borosilicate glass microspheres was performed with the aim of using the sorbent in membrane-sorption processes of helium extraction from natural gas with its simultaneous drying. Experimentally, permeability of the composite sorbent under study with respect to helium and its impermeability to air and methane has been demonstrated. Under experimental conditions, the absolute moisture content of the gas mixture having passed through the sorbent has reduced from 21.1 to 0.013 g/m³. The rate of helium adsorption by the composite sorbent has increased nearly by two orders of magnitude in comparison with the initial microspheres. It was found that the degree of saturation of the sorbent with water vapor had almost no influence on the rate of helium adsorption. A possibility of optimal use of the composite sorbent by combining the process of natural-gas drying from water vapor and the process of helium extraction from natural gas is shown. This possibility permits shortening of the process sequence for natural gas pre-conditioning prior to helium extraction.     

Accurate and analytical strain mapping at the surface of Ge/Si(0 0 1) islands by an improved flat-island approximation

We propose an extension of the well-known flat-island approximation in (1 + 1) dimensions which, while keeping simple analytical relations, allows one to better describe the strain field on the facets of steeper islands, and on the wetting layer between them. The results of atomistic molecular dynamics simulations using the Tersoff potential are used as a benchmark. The simple continuum approach is also shown to predict the correct trend of the strain gradients characterizing closely-spaced interacting islands, which has been recently observed to produce lateral motion of large Ge dots on Si(0 0 1).     

Higher order symmetrizer and application to an unusual transport equation

We study a class of stationary transport equation with nonlocal low-order tems We obtain the existence and uniqueness of a solution in sobolev spaces     

求解复杂湍流的非线性涡黏性系数模型和代数应力模型

非线性涡黏性系数模型和代数应力模型联系了线性涡黏性系数湍流模型和完整的微分 雷诺应力模型.随着它们受到日益关注,其形式也越来越多样化.本篇综述的目的是对这些模 型加以总结并比较它们之间的共同点及不同之处,指出它们与完整微分雷诺应力模型之间的 关系,以及相对于线性涡黏性系数模型而言它们在预报流场上所具有的优势.     

Start of Electron Cooling System for the NICA Booster

In order to achieve the required beam parameters in the NICA booster, the electron cooling system (ECS) was designed and manufactured at the Institute of Nuclear Physics (INP), Novosibirsk. In 2017, the system was shipped to JINR and its assembly and commissioning started. A specific feature of this system is that, for the first time ever, the electron cooling method with a magnetized e-beam is applied at the superconducting synchrotron; this imposes some additional requirements for the design and start of the ECS, operating at room temperature. This paper describes the main steps of the ECS assembly and start at the straight section of the booster, including mounting mechanical, electrical, and plumbing systems (water, electricity, air, and oil system) and geodetic works on installing the system on site. The measured magnetic field homogeneity for the straight solenoid is given. The assembly of vacuum and magnet systems takes several steps because of the ECS design features. At the final assemblage stage of the vacuum system, the vacuum chamber is baked up and the bulk getters and the cathode of the electron gun are activated. Upon completing assembly and testing the high voltage system, the E-beam is conducted from the gun to the collector.     

Fluorescence modulation of eosin Y in a PMMA film by diarylethene switching

1. Download : Download high-res image (160KB)
2. Download : Download full-size image

     

Heck reaction catalyzed by Pd/C, in a triphasic-organic/Aliquat 336/aqueous-solvent system

The rate of the Pd/C catalyzed Heck coupling of Ar-I with CH(2)=CH-R is accelerated tenfold by the presence of Aliquat 336 (A336), a well known phase transfer catalyst, and an ionic liquid. Both when conducted in A336 as solvent, and in an isooctane/A336/aqueous triphasic mixture, the Heck reaction of aryl iodides with electron deficient olefins, catalyzed by Pd/C, proceeds with high yields and selectivity. When KOH is used instead of Et(3)N, selective formation of the biphenyl rather than the Heck product, is observed. Aryl bromides react more sluggishly, and only the more activated ones undergo the Heck reaction. In the absence of the olefin, aryl halides possessing an electron withdrawing group are reduced to the corresponding Ar-H.     

Photoluminescence enhancement in double Ge/Si quantum dot structures

The luminescence properties of double Ge/Si quantum dot structures are studied at liquid helium temperature depending on the Si spacer thickness d in QD molecules. A seven-fold increase in the integrated photoluminescence intensity is obtained for the structures with optimal thickness d = 2 nm. This enhancement is explained by increasing the overlap integral of electron and hole wavefunctions. Two main factors promote this increasing. The first one is that the electrons are localized at the QD base edges and their wavefunctions are the linear combinations of the states of in-plane Δ valleys, which are perpendicular in k-space to the growth direction [001]. This results in the increasing probability of electron penetration into Ge barriers. The second factor is the arrangement of Ge nanoclusters in closely spaced QD groups. The strong tunnel coupling of QDs within these groups increases the probability of hole finding at the QD base edge, that also promotes the increase in the radiative recombination probability.     

Critical shape and size for dislocation nucleation in Si1-xGex islands on Si(001)

The critical volume for the onset of plastic strain relaxation in SiGe islands on Si(001) is computed for different Ge contents and realistic shapes by using a three-dimensional model, with position-dependent dislocation energy. It turns out that the critical bases for dome- and barnlike islands are different for any composition. By comparison to extensive atomic force microscopy measurements of the footprints left on the Si substrates by islands grown at different temperatures (and compositions), we conclude that, in contrast with planar films, dislocation nucleation in 3D islands is fully thermodynamic.