Electrochemical performance of nanocomposite LiMnPO4/C cathode materials for lithium batteries

A LiMnPO₄/C composite cathode was prepared by a combination of spray pyrolysis and wet ball milling. The cathode showed stable performance at various cutoff voltages up to 4.9 V. The cutoff voltage increase up to 4.9 V allowed the achievement of a high discharge capacity in galvanostatic charge–discharge tests. The discharge capacities of 153 mAh g^?1 at 0.05 C and 149 mAh g^?1 at 0.1 C were achieved at room temperature; the trickle-mode discharge capacities at room temperature were 132, 120 and 91 mAh g^?1 at 0.1, 1 and 5 C discharge rates, respectively. The cell exhibited a good rate capability in the galvanostatic cycling up to 5 C discharge rates at both ambient temperature and 50 °C.     

A simple approach to synthesize nanosized sulfur/graphene oxide materials for high-performance lithium/sulfur batteries

We report on a simple and facile synthesis route for the sulfur/graphene oxide composite via ultrasonic mixing of the nano-sulfur and graphene oxide aqueous suspensions followed by a low-temperature heat treatment. High-resolution transmission and scanning electronic microscopy observations revealed the formation of a highly porous structure consisting of sulfur with uniform graphene oxide coating on its surface. The resulting sulfur/graphene oxide (S/GO) composite exhibited high and stable specific discharge capacities of 591 mAh g^?1 after 100 cycles at 0.1 C and good rate capability. This enhanced electrochemical performance could be attributed to the effective confining the polysulfides dissolution and accommodation of the volume changes during the Li-S electrochemical reaction by the functional groups on the graphene oxide coating layer. Furthermore, the highly developed porous structure of S/GO composite favors the enhanced ion transport and electrolyte diffusion.     

Three-dimensional carbon fiber as current collector for lithium/sulfur batteries

Ni foam and carbon fiber cloth were tested as three-dimensional (3D) current collectors for a sulfur/polypyrrole composite cathode in lithium batteries. The cell with the carbon fiber current collector has exhibited remarkably enhanced electrochemical performance compared with its Ni foam counterpart, delivering a high initial capacity of 1,278 mAh g^?1 and maintaining a discharge capacity at 810 mAh g^?1 after 40 cycles at 0.06 C. Furthermore, the carbon fiber-based cell demonstrated a better rate capability and delivered a highly reversible discharge capacity of 397 mAh g^?1 after 50 cycles at 0.5 C, representing an increase of 194 mAh g^?1 compared to the Ni foam counterpart. The electrochemical property investigations along with scanning electron microscope studies have revealed that the carbon fiber current collector possesses a three-dimensional network structure, provides an effective electron conduction path, and minimizes the loss of electrical contact within the deposited cathode material during cycling. These results indicate that the carbon fiber cloth can be used as a promising, effective, and inexpensive current collector for Li/S batteries.     

Lithium AlPO<Subscript>4</Subscript> composite polymer battery with nanostructured LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> cathode

The borate ester plasticized AlPO₄ composite solid polymer electrolytes (SPE) have been synthesized and studied as candidates for lithium polymer battery (LPB) application. The electrochemical and thermal properties of SPE were shown to be suitable for practical LPB. Nanostructured LiMn₂O₄ with spherical particles was synthesized via ultrasonic spray pyrolysis technique and has shown a superior performance to the one prepared via conventional methods as cathode for LPB. Furthermore, the AlPO₄ addition to the polymer electrolyte has improved the polymer battery performance. Based on the AC impedance spectroscopy data, the performance improvement was suggested as being due to the cathode/polymer electrolyte interface stabilization in the presence of AlPO₄. The Li/composite polymer electrolyte/nanostructured LiMn₂O₄ electrochemical cell showed stable cyclability during the various current density tests, and its performance was found to be quite acceptable for practical utilities at ambient temperature and showed remarkable improvements at 60 °C compared with the solid state reaction counterpart.     

Novel silicon nanowire film on copper foil as high performance anode for lithium-ion batteries

A novel silicon nanowire film anode was successfully prepared by a combination of magnetron sputtering deposition and metal-catalyzed electroless etching technology. Scanning electron microscopy revealed the formation of a Si film composed of nanowires with a diameter of ~70 nm and lengths of ~3.5 μm. As-prepared Si nanowire film is directly grown on current collectors without binders and carbon additives, which provides a good contact and adhesion of them to current collector. Furthermore, the defined spacing of nanoscale Si nanowire allows Si to undergo large volume change during the alloying/dealloying process without loss of its integrity. These structural features of the resulting Si nanowire make it a promising anode for lithium-ion batteries with remarkably improved electrochemical performance compared with the Si film-based electrode prepared without metal-catalyzed electroless etching process.     

Synthesis of hierarchical MoS<Subscript>2</Subscript> microspheres composed of nanosheets assembled via facile hydrothermal method as anode material for lithium-ion batteries

A hierarchical MoS₂ architecture composed of nanosheet-assembled microspheres with an expanded interplanar spacing of the (002) planes was successfully prepared via a simple hydrothermal reaction. Electron microscopy studies revealed formation of the MoS₂ microspheres with an average diameter of 230 nm. It was shown that the hierarchical structure of MoS₂ microspheres possesses both the merits of nanometer-sized building blocks and micrometer-sized assemblies, which offer high surface area for fast kinetics and buffers the volume expansion during lithium insertion/deinsertion, respectively. The micrometer-sized assemblies were found to contribute to the enhanced electrochemical stabilities of the electrode materials. The mentioned advantages of the MoS₂ electrode prepared in this work allowed enhanced cyclability and high rate capability of the material. Along with this, the material delivered a high initial discharge capacity of 1206 mAh g^?1 and a reversible discharge capacity of 653 mAh g^?1 after 100 cycles at a current density of 100 mA g^?1. Furthermore, the material delivered a high reversible capacity of 480 mAh g^?1 at a high current density of 1000 mA g^?1.     

Synthesis and electrochemical investigation of highly dispersed ZnO nanoparticles as anode material for lithium-ion batteries

Highly dispersed ZnO nanoparticles were prepared by a versatile and scalable sol-gel synthetic technique. High-resolution transmission electronic microscopy (HRTEM) showed that the as-prepared ZnO nanoparticles are spherical in shape and exhibit a uniform particle size distribution with the average size of about 7 nm. Electrochemical properties of the resulting ZnO were evaluated by galvanostatic discharge/charge cycling as anode for lithium-ion battery. A reversible capacity of 1652 mAh g^?1 was delivered at the initial cycle and a capacity of 318 mAh g^?1 was remained after 100 cycles. Furthermore, the system could deliver a reversible capacity of 229 mAh g^?1 even at a high current density of 1.5 C. This outstanding electrochemical performance could be attributed to the nano-sized features of highly dispersed ZnO particles allowing for the better accommodation of large strains caused by particle expansion/shrinkage along with providing shorter diffusion paths for Li⁺ ions upon insertion/deinsertion.     

A simple approach to synthesize novel sulfur/graphene oxide/multiwalled carbon nanotube composite cathode for high performance lithium/sulfur batteries

A sulfur/graphene oxide/multiwalled carbon nanotube (S/GO/MWNT) composite was synthesized via a simple ultrasonic mixing method followed by heat treatment. By taking advantage of this solution-based self-assembly synthesis route, poisonous and noxious reagents and complicated fabrication processes are rendered unnecessary, thereby simplifying its manufacturing and decreasing the cost of the final product. Transmission and scanning electronic microscopy observations indicated the formation of the three-dimensional interconnected S/GO/MWNT composite through the environmentally friendly process. The GO layers and long MWNTs synergistically constructed hierarchical electron/ion pathways, favoring the ion transport and electrolyte diffusion. The interlaced network can serve as sponges to physically absorb polysulfides to their wrinkled surface and porous structure. In addition, GO could confine the polysulfides’ dissolution through chemical absorption by the functional groups on GO layers. Therefore, the resulting S/GO/MWNT composite exhibits good rate capability and highly stable specific discharge capacity of 773 mA h g^?1 after 100 cycles at 0.1 C.     

Battery performance of nanostructured lithium manganese oxide synthesized by ultrasonic spray pyrolysis at elevated temperature

Nanostructured lithium manganese oxide with spherical particles was synthesized via ultrasonic spray pyrolysis technique. The material shows a pronounced stability upon prolonged cycling at room temperature at high charge–discharge rates up to 10C. The electrochemical performance of the cell at elevated temperature was remarkably improved by addition of AlPO₄ to the electrolyte. The AC impedance spectroscopy study showed the interface stabilization by the AlPO₄ additives and the suppression of the interface impedance development upon prolonged cycling.