The synthesis and reaction of N-sulfenyl heterocycles: development of effective sulfenylating reagents

Various N-sulfenyl heterocycles were synthesized by transamination of sulfenamides using a chlorine gas-free method. The N-sulfenyl heterocycles behaved as sulfenylating reagents of anilines; N-sulfenylbenzimidazoles were the most effective.     

Preparation and characterization of mesoporous silica thin films from polyethoxysiloxanes

Tetraethoxysilane (TEOS) and polyethoxysiloxanes (PEOSs; prepared by the acid‐catalyzed hydrolytic polycondensation of TEOS) were subjected to the sol–gel process in the presence of cetyltrimethylammonium bromide (CTAB), respectively. The PEOSs with M_w 700–26,000, as prepared by sol–gel coating of TEOS and PEOS under various conditions, were used. Uniform and crack‐free thin films of thickness 276–613 nm were prepared by spin‐coating of a PEOS solution containing CTAB. When the coating films were sintered at 400 °C, the combustion of ethoxy groups and CTAB took place to provide porous silica thin films. The structure of the thin films was found to be dependent on the molecular weight of PEOS and the molar ratio of CTAB/Si: lamellar or hexagonal phase was observed for M_w less than 15,000 and for CTAB/Si molar ratios greater than 0.10. Honeycomb structures were observed for M_w less than 5000 and for CTAB/Si molar ratios of 0.15. The honeycomb structure was also observed by atomic force microscopy and transmission electron microscope. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2542–2550, 2006     

Local dynamic mechanical properties in model free-standing polymer thin films

High-frequency sinusoidal oscillations of a coarse-grained polymer model are used to calculate the local dynamic mechanical properties (DMPs) of free-standing polymer thin films. The storage modulus G(') and loss modulus G(") are examined as a function of position normal to the free surfaces. It is found that mechanically soft layers arise near the free surfaces of glassy thin films, and that their thickness becomes comparable to the entire film thickness as the temperature approaches the glass transition T(g). As a result, the overall stiffness of glassy thin films decreases with film thickness. It is also shown that two regions coexist in thin films just at the bulk T(g); a melt-like region (G(')G(")) in the middle of the film. Our findings on the existence of a heterogeneous distribution of DMPs in free-standing polymer thin films provide insights into recent experimental measurements of the mechanical properties of glassy polymer thin films.     

Two-dimensional self-organization of phthalocyanine and porphyrin: dependence on the crystallographic orientation of Au

By immersing Au substrate into a benzene solution containing both cobalt(II) phthalocyanine (CoPc) and copper(II) tetraphenyl-21H,23H-porphine (CuTPP), a two-dimensional alternate bimolecular structure was formed on the reconstructed Au(100)-(hex) surface.     

Solvent free synthesis of polyaniline-clay nanocomposites from mechanochemically intercalated anilinium fluoride

Nanocomposites consisting of conducting polyaniline and clay minerals were successfully synthesized from mechanochemically intercalated anilinium fluoride; the nanocomposites prepared by the mechanochemical intercalation method contained much more polyaniline in the clay layers than those prepared by a conventional solution method.     

Dependence of molecular recognition of fullerene derivative on the adlayer structure of zinc octaethylporphyrin formed on Au(100) surface

Adlayers of ZnOEP were prepared on reconstructed Au(100)-(hex) and unreconstructed Au(100)-(1 x 1) surfaces by immersing into a benzene solution containing ZnOEP molecules, and the adlayer structures were characterized by scanning tunneling microscopy (STM). A hexagonally arranged ZnOEP array was formed on an Au(100)-(hex) surface, whereas a rectangularly arranged ZnOEP array was found on an Au(100)-(1 x 1) surface. The adlayer structure of ZnOEP was dependent upon the underlying Au atomic arrangements. Furthermore, an investigation of the spuramolecular assembly for these modified surfaces was carried out by using an open-cage C(60) derivative (opened C(60)). A supramolecular assembled adlayer with a 1:1 composition of opened C(60)/ZnOEP was formed on Au(100)-(hex), whereas aggregates of opened C(60) were found on the ZnOEP-modified Au(100)-(1 x 1) surface. Electrochemical responses of opened C(60) were significantly influenced by underlying ZnOEP arrays. This finding suggests that precise control of underlying ZnOEP adlayers with the Au atomic structure is important to recognize the opened C(60) on them.     

Phase-death mode in two-coupled chemical oscillators studied with reactors of different volume and by simulation

The behavior of the phase-death mode (cessation of oscillations and transition to a steady state) in the two-coupled Belousov–Zhabotinsky reactions is studied in the asymmetric coupling. In an experiment, the types of synchronized modes and their regions were investigated as an extension of our previous study. This experiment is compared to a simulation using the two-coupled three-variable Oregonator models. The results confirm that the phase-death mode changes from “bistable” to “monostable” and reveal the stable region of the latter.     

Preparation of polysiloxanes from silicic acid. III. Preparation and properties of polysilicic acid butyl esters

Polysilicic acid butyl esters were prepared from 1-butanol and silicic acid extracted from sodium metasilicate solution and water glass with tetrahydrofuran and hydrochloric acid. The properties of the esters were dependent on the degree of esterification (DE). The esters with a DE of less than ca. 60% could be isolated by precipitation with hexane and were highly liable to self-condensation, whereas those with more than 60% DE were soluble in solvents and could not be precipitated easily. They underwent further condensation to form highly polymerized esters. Subsequent silylation allowed the isolation and characterization of these esters. The solvent-soluble silylated esters had moderate thermal stability with decomposition points between 210 and 260°C and number-average molecular weights of 10,000–30,000. From the evaluation of units structures of silylate it was suggested that polymer backbone was a pseudoladder structure.     

Syntheses and Characterization of Polymetallosiloxanes from Silicic Acid and Metal Chlorides

Syntheses and characterization of polymetallosiloxanes by the non-hydrolysis sol-gel process using no metal alkoxides were investigated. The reaction of silicic acid (SA) with MCl₄ (M = Ti, Zr) in the molar ratios SA/MCl₄ = 0.5–3.0 using a tetrahydrofuran-methanol solvent formed polymetallosiloxane (PMS), which was insoluble in organic solvents regardless of the molar ratio. The PMS was isolated as esterified polymetallosiloxane by esterification with isopropyl alcohol for various periods, which were soluble in methanol, acetone, and tetrahydrofuran. The number average molecular weight was 1000–3200 for esterified polytitanosiloxane and 3400–11000 for esterified polyzirconosiloxane. Esterified polymetallosiloxanes had no melting point but decomposition point. The results of analytical data indicated that esterified polymetallosiloxane and/or polymetallosiloxane consisted of the main chain of Si–O–Si and Si–O–M linkage with the pendants of alkoxy, silanol, and chloro group.