POLYETHYLENE GLYCOL-MODIFIED HEMATOPORPHYRIN AS PHOTOSENSITIZER

Abstract— Hematoporphyrin, having two carboxylic groups, was coupled with α-(3-aminopropyl)-ω-methoxypoly(oxyethylene), PEG-NH₂, through acid-amide bond formed with carbodtimide. PEG-modified hematoporphyrin was readily soluble not only in neutral aqueous solution but also in organic solvents. Its absorption spectrum showed a sharp band at 376 nm in neutral aqueous solution and at 403 nm in benzene. Modified hematoporphyrin acted as a photosensitizer; imidazole and indole were photooxidized in organic solvents such as benzene or chloroform, and uric acid was also photooxidized in neutral aqueous solution.     

Optical coupling characteristics of graded-index type photonic crystal fiber collimator depending on air hole diameter ratio to pitch

Optical Review - A graded-index type photonic crystal fiber (GI-PCF) has a graded effective index distribution that can be realized by an α-power air hole diameter distribution in radial...     

Band-selective recoupling of homonuclear double-quantum dipolar interaction with a generalized composite 0 degrees pulse: application to 13C aliphatic region-selective magnetization transfer in solids

Recoupling of homonuclear double quantum (DQ)-dipolar interactions is a useful technique for the structural analysis of molecules in solids. We have designed a series of elemental 0 degrees pulses for the recoupling sequences with the rf phase rotation about the z-axis, known as CN. The proposed 0 degrees pulses whose total flip angle >/=360 degrees provide spin rotation vectors in the xy-plane. Thus, the residual spin rotation can be canceled by rf phase rotation about the z-axis. An analysis by the coherent averaging theory showed that effective bandwidths of the recoupling sequences are limited not by the reduction in the dipolar scaling factor but by the increase in the residual spin rotation due to offset. A CN sequence with these elemental pulses provides an effective bandwidth of DQ-dipolar recoupling from ca. 0.5nu(R) to 4nu(R) for numerical simulations. Here, nu(R) is the sample spinning frequency. The 0 degrees pulses were applied to band-selective recoupling for the magnetization transfer in uniformly 13C-labeled molecules. Narrow-band recoupling enhances the magnetization transfer between spins within the effective range by decoupling the dipolar interactions between spins one of which is outside the range. The narrow band operation reduces rf field strength, which improves the CH decoupling. Increases in signal intensities by the use of the proposed 0 degrees pulses are experimentally shown for 13C-labeled amino acids.     

Formation and Characterization of Reversed Micelles Composed of Phospholipids and Fatty Acids

The formation of reversed micellar systems composed of phosphatidylcholine (PC) and fatty acid was newly demonstrated by a significant increase in water content in the organic ethyl oleate phase when the micelles were prepared by the contact method. The solubilized water concentration in the reversed micellar organic phase reached 3 wt%. The new systems are expected to be used as highly biocompatible reversed micellar systems. The structure of the reversed micelles composed of PC and oleic acid was characterized by determining the water concentration and by small-angle X-ray scattering analysis. The reversed micelles composed of PC and oleic acid formed in ethyl oleate were spherical. The radius of gyration was between 30 and 50 Å. The size of the reversed micelles decreased with an increase in the oleic acid concentration and was independent of the PC concentration. Experimental results indicated that the structure of the reversed micellar system was determined by the oleic acid concentration. An increase in the PC concentration caused an increase in the number of reversed micelles of the same size. These reversed micellar systems are expected to be used as solubilization media in pharmaceutical and food industries because they are not toxic.     

Velocity vector measurement based on correlation process between low coherence interference outputs

Velocity vector measurement by using fiber-optic low coherence interferometers is proposed and demonstrated. The interference outputs between the reference and backscattered light from the probing points in the flow are correlation processed. The probing points can be specified and are set on the x-, y-, and z-axis in the flow by using the fiber-optic low coherence interferometers. The direction (angles from each axis) and absolute value of the flow velocity can be measured from peak positions of correlations.     

Fluorescence-based temperature sensing using erbium-doped optical fibers with 1.48 μm pumping

Temperature sensing using 1.54 μm fluorescence at the transition between the energy levels⁴I_15/2 (ground state) and⁴I_13/2 generated in an erbium-doped fiber with 1.48 μm pumping is proposed. The fluorescence has a peculiar spectral profile that possesses two peaks around 1.530 μm and 1.552 μm wavelengths. The temperature-dependent fluorescence is investigated in the temperature range between -50°C and 90°C. The power ratio between the two peaks increases with an increase in temperature. The sensitivity of the ratio is 0.007/°C on average in the measured temperature range. The total fluorescence power and the absorption loss at λ = 1480 nm in the fiber decrease as the temperature increases. Optical fiber temperature sensing immune from the fluctuation in pumping power can be performed using the peak power ratio and/or the absorption loss.     

Laser-induced microjet: wavelength and pulse duration effects on bubble and jet generation for drug injection

The expansion of the laser-induced bubble is the main mechanism in the developed microjet injector. In this study, Nd:YAG and Er:YAG lasers are used as triggers of the bubble formation. The impact of the laser parameters on the bubble dynamics is studied and the performance of the injector is evaluated. We found that the main cause of the differences in the bubble behavior comes from the pulse duration and wavelength. For Nd:YAG laser, the pulse duration is very short relative to the bubble lifetime making the behavior of the bubble close to that of the cavitation bubble, while in Er:YAG case, the high absorption in the water and long pulse duration change the initial behavior of the bubble making it close to a vapor bubble. The contraction and subsequent rebound are typical for cavitation bubbles in both cases. The results show that the laser-induced microjet injector generates velocity which is sufficient for the drug delivery for both laser beams of different pulse duration. We estimate the typical velocity within 30–80 m/s range and the breakup length to be larger than 1 mm suitable for trans-dermal drug injection.     

Chaos in Fiber-Optic Stimulated Brillouin Scattering Dependent on Pump Power, Nonlinear Refractive Index, Feedback Power, and Fiber Length

Dependence of Stokes dynamics in stimulated Brillouin scattering generated in optical fibers on the pump power, the nonlinear refractive index, the fiber length, and the feedback powers of the pump and the Stokes is numerically analyzed. The Stokes power fluctuation becomes complicated and chaotic as the nonlinear refractive index and the input pump power increase in a fiber of sufficient length. The Stokes dynamics is less complicated and the chaotic region decreases in a pump power-reflectivity domain in a short fiber. The chaotic behavior appears without regular tendency in relation to the feedback power. Taking into account the pump feedback, the chaotic region expands and some Stokes behaviors are different in the P_P-R domain graph, compared with the case with the Stokes feedback alone, although this feedback does play an essential role in Stokes dynamics.