Alloying by high dose ion implantation of iron into magnesium and aluminium

Alloys of the systems Fe–Al (mixable over the whole concentration range) and Fe–Mg (insoluble with each other) were produced by implantation of Fe ions into Al and Mg, respectively. The implantation energy was 200 keV and the ion doses ranged from 1 × 10₁₄ to 9 × 10₁₇cm^-2The obtained implantation profiles were determined by Auger electron spectroscopy depth profiling. Maximum iron concentrations reached were up to 60 at.% for implantation into Al and 94 at.% for implantation into Mg. Phase analysis of the implanted layers was performed by conversion electron Mössbauer spectroscopy and X‐ray diffraction. For implantation into Mg, two different kinds of Mössbauer spectra were obtained: at low doses paramagnetic doublets indicating at least two different iron sites and at high doses a dominant ferromagnetic six‐line‐pattern with a small paramagnetic fraction. The X‐ray diffraction pattern concluded that in the latter case a dilated αiron lattice is formed. For implantation into Al, the Mössbauer spectra were doublet structures very similar to those obtained at amorphous Fe–Al alloys produced by rapid quenching methods. They also indicated at least two different main iron environments. For the highest implanted sample a ferromagnetic six‐line‐pattern with magnetic field values close to those of Fe₃Al appeared.     

A needle-and-thread approach to bilayer transport: permeation of a molecular umbrella-oligonucleotide conjugate across a phospholipid membrane

A di-walled molecular umbrella, composed of two choloyl groups, one spermidine moiety, and a 5-thiol(2-nitrobenzoyl) "handle", was covalently attached to a 16-mer oligonucleotide (S-dT16) through a disulfide bond. Incubation of this conjugate (1) with vesicles made from 1-palmitoyl-2-oleyol-sn-glycero-3-phosphocholine and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylglycerol (95/5, mol/mol) (200 nm diameter, extrusion) that contained entrapped glutathione (GSH) at 37 degrees C resulted in the liberation of the oligonucleotide and the umbrella-bound 5-mercapto(2-nitrobenzoyl) moiety (USH) via thiolate-disulfide interchange. The appearance of USH, together with the absence of leakage of entrapped GSH and a vesicular capture of the oligonucleotide that matches the extent of USH formation, provides compelling evidence for delivery of S-dT16 into the aqueous compartment of these vesicles. In a sense, the molecular umbrella functions like a "needle" in providing a pathway for the oligonucleotide (the "thread") to cross the membrane.     

Investigation of drift gas selectivity in high resolution ion mobility spectrometry with mass spectrometry detection

Recent studies in electrospray ionization (ESI)/ion mobility spectrometry (IMS) have focussed on employing different drift gases to alter separation efficiency for some molecules. This study investigates four structurally similar classes of molecules (cocaine and metabolites, amphetamines, benzodiazepines, and small peptides) to determine the effect of structure on relative mobility changes in four drift gases (helium, nitrogen, argon, carbon dioxide). Collision cross sections were plotted against drift gas polarizability and a linear relationship was found for the nineteen compounds evaluated in the study. Based on the reduced mobility database, all nineteen compounds could be separated in one of the four drift gases, however, the drift gas that provided optimal separation was specific for the two compounds.     

The statistical significance of selected sense–antisense peptide interactions

Sense and antisense peptides, encoded by sense and corresponding antisense DNA strands, are capable of specific interactions that could be a driving force to mediate protein–protein or protein–peptide binding associations. The complementary residue hypothesis suggests that these interactions are founded upon the sum of pairwise interactions between amino acids encoded by corresponding sense and antisense codons. Despite many successful experimental results obtained with the hypothesis, however, the physicochemical basis for these interactions is poorly understood. We examined the potential of the hypothesis for general identification of protein–protein interaction sites, and the possible role of the hypothesis in determining folding in a broad set of protein structures. In addition, we performed a structural study to investigate the binding of a complementary peptide to IL‐1F2. Our results suggest that complementary residue pairs are no more frequent or conserved than average in protein–protein interfaces, and are statistically under‐represented amongst contacting residue pairs in folded protein structures. Although our structural results matched experimental observations of binding between the peptide and IL‐1F2, complementary residue interactions do not appear to be dominant in the bound structure. Overall, our data do not allow us to conclude that the complementary residue hypothesis accounts for specific sense–antisense peptide interactions. © 2012 Wiley Periodicals, Inc.     

Betacyanins and Betaxanthins in Cultivated Varieties of Beta vulgaris L. Compared to Weed Beets

There are 11 different varieties of Beta vulgaris L. that are used in the food industry, including sugar beets, beetroots, Swiss chard, and fodder beets. The typical red coloration of their tissues is caused by the indole-derived glycosides known as betalains that were analyzed in hypocotyl extracts by UV/Vis spectrophotometry to determine the content of betacyanins (betanin) and of betaxanthins (vulgaxanthin I) as constituents of the total betalain content. Fields of beet crops use to be also infested by wild beets, hybrids related to B. vulgaris subsp. maritima or B. macrocarpa Guss., which significantly decrease the quality and quantity of sugar beet yield; additionally, these plants produce betalains at an early stage. All tested B. vulgaris varieties could be distinguished from weed beets according to betacyanins, betaxanthins or total betalain content. The highest values of betacyanins were found in beetroots ‘Monorubra’ (9.69 mg/100 mL) and ‘Libero’ (8.42 mg/100 mL). Other beet varieties contained less betacyanins: Sugar beet ‘Labonita’ 0.11 mg/100 mL; Swiss chard ‘Lucullus,’ 0.09 mg/100 mL; fodder beet ‘Monro’ 0.15 mg/100 mL. In contrast with weed beets and beetroots, these varieties have a ratio of betacyanins to betaxanthins under 1.0, but the betaxanthin content was higher in beetcrops than in wild beet and can be used as an alternative to non-red varieties. Stability tests of selected varieties showed that storage at 22 °C for 6 h, or at 7 °C for 24 h, did not significantly reduce the betalain content in the samples.     

A polymerized calix[6]arene monolayer having gas permeation selectivity that exceeds Knudsen diffusion

A polymerized monolayer of 5,11,17,23,29,35-hexamercaptomethyl-37,38,40,41,42-hexakis-(1-n hexadecyloxy)calix[6]arene (1) has been synthesized on the surface of an ca. 15 mum-thick film derived from poly[1-(trimethylsilyl)-1-propyne] (PTMSP). This monolayer exhibits a permeation selectivity toward He and SF6 that exceeds Knudsen diffusion. Analogous membranes made from a calix[6]arene that contains amidoxime headgroups (i.e., 2) showed Knudsen diffusion characteristics.     

Luminescence Properties of New Fused Benzothiophene Derivatives and Their Conductive Oligomers Structural and Solvent Effects

The structural and solvent effects on the electronic absorption and fluorescence spectra, and fluorescence quantum yields, of four new fused benzothiophene derivatives, including benzothieno[3,2b]-thiophene (BTT), benzothieno[3,2-b]benzothiophene (BTBT), 6-methoxy[1]benzothieno[3,2b]-thiophene (MeOBTT), and benzothieno[3,2-b]indole (BTI) were investigated at 295 K. The luminescence properties of the corresponding conductive oligomers, poly(BTT) and poly (MeOBTT), electrosynthesized in acetonitrile, were also studied. Satisfactory McRae, Suppan, and Kawski-Chamma-Viallet solvatochromic correlations were established for the four monomers in most solvents. A weak negative solvatochromic behavior was found for these compounds, indicating that their dipole moments are slightly lower in the excited singlet state than in the ground state. Kamlet-Abboud-Taft multiparametric correlations were also obtained for absorption and fluorescence wave numbers and quantum yields, demonstrating the existence of specific solute-solvent interactions. In the case of the oligomers, important red-shifts of the fluorescence emission maxima ( 90–110 nm) relative to the corresponding monomers were observed, which shows the extent of conjugated segments in the oligomer chains.     

Meta nitration of thiacalixarenes

Nitration of thiacalix[4]arene, immobilized in the 1,3-alternate conformation, leads regioselectively to meta-substituted products. Depending on the reaction conditions, mono- and dinitro-derivatives can be isolated in acceptable yields. This unique substitution pattern is inaccessible in classical calixarene chemistry, and yields inherently chiral compounds, which makes thiacalixarenes very attractive as building blocks or molecular scaffolds.     

Electrospray ionization with ambient pressure ion mobility separation and mass analysis by orthogonal time-of-flight mass spectrometry.

Rapid screening and identification of drug and other mixtures are possible using a novel ambient pressure high-resolution ion mobility (APIMS) orthogonal reflector time-of-flight mass spectrometer (TOFMS). Departing ions from the APIMS drift tube traversed a pressure interface between the APIMS and TOFMS where they were subjected to numerous gas collisions that could produce selective fragmentation. By increasing the accelerating field in the pressure interface region, the ions generated using water-cooled electrospray ionization (ESI) underwent collision-induced dissociation (CID). Mixtures of ESI ions were separated by APIMS based on their respective size-to-charge (s/z) ratios while CID and analysis of mass-to-charge (m/z) ratios occurred in the pressure interface and TOFMS. Product ions that were formed in this pressure interface region could be readily assigned to precursor ions by matching the mobility drift times. This process was demonstrated by the examination of a mixture of amphetamines and the resulting fragmentation patterns of the mobility-separated precursor ion species [M + H](+).     

Tribological properties of chromium implanted silicon nitride ceramics correlated with microstructure

3 N₄ ceramic after chromium implantation were investigated for the dependence on implantation energy between 200 keV and 3 MeV at a fixed fluence of 10¹⁷ ions/cm². The wear of the modified material is reduced for a load of 2 N independent of ion energy accompanied by a slight increase of the friction coefficient. At higher loads only high-energy implantations result in improved wear behaviour. Structural investigations show the absence of any new phases formed by ion implantation. All energies result in an amorphous layer. For lower energies this amorphous layer reaches up to the surface whereas at higher energies it is covered by still-crystalline but damaged material. The observed wear behaviour can be explained with the amorphization of the near surface region and the stress generated by the volume swelling of the amorphous layer. Received: 25 November 1996/Accepted: 29 April 1997