Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

Interfacing gradient elution ion-exchange chromatography and low-angle laser light-scattering photometry for analysis of proteins.

Molecular weights (MWs) of different proteins were determined by interfacing gradient elution ion-exchange chromatography and low-angle laser light-scattering photometry (IEC-LALLS). A high-performance strong cation-exchange column was used to elute proteins using fast (5 min) and conventional (15-30 min) gradients. The eluted proteins were characterized on-line by determining their MWs using LALLS. The specific refractive index (RI) increment (dn/dc) and the RI of the solvent used over the gradient range were determined off-line and used to calculate the absolute weight-average MWs. Four proteins, ribonuclease A, alpha-chymotrypsinogen A, trypsinogen and beta-lactoglobulin A (beta-LACT) were studied. Accurate MWs were obtained for all the proteins using fast and conventional gradients, except for beta-LACT, which aggregated as a function of the gradient employed. The degree of aggregation of beta-LACT increased as the rapidity of the gradient was increased over a fixed gradient range. This study indicated that it is possible to separate and characterize proteins rapidly using IEC-LALLS.     

Development of a pH titration method for the simultaneous determination of uranium,nitrate and free-acid in the feed solution of the sol-gel process of nuclear fuel fabrication

pH titration curves generated by slow addition of alkali to solutions containing varying concentrations of uranyl nitrate and nitric acid were studied using an autotitrator linked to a personal computer. A procedure with multiple choice of equations has been developed for the estimation of free acid, nitrate and uranium in pure uranyl nitrate solution by a single titration. The technique provides a simple single-step method with required accuracy and precision for the simultaneous estimation of the three quantities in the uranyl nitrate feed solution of the sol-gel process for making UO₃ microspheres. The relative standard deviations in the determination of uranium and nitrate were ±0.82% and ±1.52%, respectively, in 15 determinations.     

Rapid quantitative capillary zone electrophoresis method for monitoring the micro-heterogeneity of an intact recombinant glycoprotein

A simple high-resolution capillary zone electrophoresis (CZE) method capable of rapidly assessing the micro-heterogeneity of a 24 kDa molecular weight glycoprotein, has been developed. Separation is carried out using a bare silica capillary at a pH of 2.5 in a commercially available electrophoresis buffer system composed of triethanolamine and phosphoric acid. Over 30 peaks were detected within a run time of 15 min using a 27 cm capillary and approximately 60 peaks were detected using a 77 cm capillary. Although most of the peaks arise from differences in the oligosaccharide structures present on the one glycosylation site on this molecule, other forms of micro-heterogeneity due to the presence of the nonglycosylated form of this glycoprotein and various types of chemical degradation, e.g., deamidation, are also responsible for the multitude of peaks observed. Although the exact chemical identity of each peak in the resulting electropherogram of this glycoprotein is not known, useful information can be obtained for assessing comparability, stability, and batch consistency. Factors impacting the resolution, precision, accuracy, and robustness of the assay are also discussed along with inherent advantages and limitations associated with measuring the micro-heterogeneity of intact glycoproteins.     

Strategies for locating disulfide bonds in a monoclonal antibody via mass spectrometry

The location of the disulfide bonds in a recombinant monoclonal antibody was confirmed by matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) and electrospray ionization (ESI) mass spectrometry (MS). A non-reduced Endoproteinase Lys-C (Endo Lys-C) digest of the antibody was analyzed directly by MALDI-TOFMS. The sample was then reduced on-plate by depositing dithiothreitol (DTT) on the sample spot and re-analyzed by MALDI-TOFMS. The disulfide bonds were assigned based on the disappearance of certain mass ions in the non-reduced digest and the appearance of product ions in the reduced digest. A rapid LC/ESI-MS protocol was also developed to determine the location of the disulfide bonds. The peptides generated from the Endo Lys-C digest of the antibody were partially separated on a high performance liquid chromatography (HPLC) column by utilizing a steep gradient and analyzed by ESI-MS. The masses of the partially resolved peptides were determined by deconvoluting the mass spectra.     

Characterization of proteins separated by displacement chromatography using low angle laser light scattering photometry

Summary -Lactoglobulin A and B (-LACT) were separated by displacement chromatography (DSC) on an ionexchange column using dextran sulfate as the displacer. A LALLS photometer and a UV detector, in series, were used to determine the molecular weight (MW) of the proteins, on-line. The results indicate that both, -LACT A and B, were present as dimers in the buffer used for the mobile phase. The MWs of the proteins were about 6–8% higher than the theoretical MW of a dimer (37,000). Additional control studies have shown the presence of a high molecular weight species in both the proteins, which could possibly be an aggregate. This species was observed in the LALLS signal but was nearly absent in the UV signal. Our work has demonstrated the feasibility of interfacing LALLS with displacement chromatography for detecting impurities or aggregates which may be difficult to detect by conventional detectors used for chromatography.     

In-situ green synthesis of highly active GSH-capped Pt–Au–Ag-hybrid nanoclusters

Recently much attention has been paid to the application of metal hybrid nanoparticles in industrial catalytic fields because of their super-efficient catalytic activity and attractive properties. We explored a novel strategy to prepare GSH-capped Pt–Au–Ag-hybrid nanoclusters through the synergistic effect between ascorbic acid(VC) and glutathione(GSH) with chloroplatinic acid, chloroauric acid, and silver nitrate as precursors. The potential utilization of as-prepared GSH-capped Pt–Au–Aghybrid nanoclusters for catalytic applications has been evaluated through the reduction of 4-nitrophenol(4-NP) with NaBH4; we obtained the kinetic data by monitoring with UV-Vis spectroscopy. Our results illustrate that GSH-capped Pt–Au– Ag-hybrid nanoclusters could facilitate the process of reduction of 4-NP in a way that is unprecedented. This approach may offer a novel, non-cytotoxicity, efficient catalyst for industry.     

Estimation of plutonium present in 200 litre waste drums containing high amount of beta gamma activity

The segmented gamma ray scanning system developed for the assay of plutonium present in 200?L waste drums was modified for the estimation of gram amounts of plutonium in the presence of high beta gamma activity. A multi gamma ray source of ¹⁵²Eu having?~1?mCi activity was used for the determination of attenuation correction factors for high count rate drums. Dead time corrections were applied to arrive at the corrected count rates for all the gamma rays. Present study has shown that the estimation of?~1?g of ²³⁹Pu in a waste drum can be carried out in the presence of ¹³⁷Cs up to an activity level of 20?mCi.     

Track revelation and optical properties of pentaerythritol tetrakis (allyl carbonate) plastic for application as nuclear track detector: effects of gamma radiations

The etching conditions of an indigenously prepared thin film of pentaerythritol tetrakis(allyl carbonate) (PETAC) were standardised for the use as a nuclear track detector. The optimum etching times in 6?N NaOH at 70°C for the appearance of fission and alpha tracks recorded in this detector from a ²⁵²Cf solid source were found to be 30 min and 1.50?h, respectively. The experimentally determined values for the bulk and track-etch rates for this detector in 6?N NaOH at 70°C were found to be 1.7?±?0.1 and 88.4?±?10.7?µm/h, respectively. From these results, the important track etching properties such as the critical angle of etching, the sensitivity and the fission track registration efficiency were calculated and compared with the commercially available detectors. The activation energy value for bulk etching calculated by applying Arrhenius equation to the bulk etch rates of the detector determined at different etching temperatures was found to be 0.86?±?0.02?eV. This compares very well with the value of about 1.0?eV reported for most commonly used track detectors. The effects of gamma irradiation on this new detector in the dose range of 200–1000?kGy have also been studied using bulk etch rate technique. The activation energy values for bulk etching calculated from bulk etch rates measurements at different temperatures were found to decrease with the increase in gamma dose indicating scission of the detector due to gamma irradiation. The optical band gap of this detector was also determined using UV–visible spectrometry and the value was found to be 4.37?±?0.05?eV.     

Determination of protein oxidation by mass spectrometry and method transfer to quality control

Characterization and quantitative analysis of oxidation plays an important role in biopharmaceutical development. This study demonstrates an approach to the assessment of susceptible to oxidation methionine residues in monoclonal antibodies and recombinant proteins. A method for the determination of oxidation levels by peptide mapping with mass spectrometric (MS) detection is described and its advantages compared to the UV detection are presented. Good linearity and reproducibility for determination of oxidation with MS detection are demonstrated (R2 > 0.99; RSDs of 4-9%). Aspects of method transfer to quality control group (QC) are discussed. As well, a quick and easy flow injection/MS method is proposed to substitute for peptide map analysis. Peptide coverage, linearity, reproducibility, robustness, sensitivity and quantitative oxidation results are compared for the flow injection/MS and LC/MS approaches.