Probing the Catalytic Activity of Reduced Graphene Oxide Decorated with Au Nanoparticles Triggered by Visible Light

Hybrid materials in which reduced graphene oxide (rGO) is decorated with Au nanoparticles (rGO–Au NPs) were obtained by the in situ reduction of GO and AuCl₄^?_(aq) by ascorbic acid. On laser excitation, rGO could be oxidized as a result of the surface plasmon resonance (SPR) excitation in the Au NPs, which generates activated O₂ through the transfer of SPR‐excited hot electrons to O₂ molecules adsorbed from air. The SPR‐mediated catalytic oxidation of p‐aminothiophenol (PATP) to p,p′‐dimercaptoazobenzene (DMAB) was then employed as a model reaction to probe the effect of rGO as a support for Au NPs on their SPR‐mediated catalytic activities. The increased conversion of PATP to DMAB relative to individual Au NPs indicated that charge‐transfer processes from rGO to Au took place and contributed to improved SPR‐mediated activity. Since the transfer of electrons from Au to adsorbed O₂ molecules is the crucial step for PATP oxidation, in addition to the SPR‐excited hot electrons of Au NPs, the transfer of electrons from rGO to Au contributed to increasing the electron density of Au above the Fermi level and thus the Au‐to‐O₂ charge‐transfer process.     

Influence of nickel on 475°C embrittlement of Fe−Cr−Ni alloys: Mössbauer effect study

The phenomenon of “475°C embrittlement” of Fe?Cr?Ni alloys with Fe/Cr ratios of 2.7 and 1.05, containing 0.2 and 4 at.% Ni, has been investigated using the Mössbauer effect and hardness measurements. The results show that the addition of nickel to Fe-xCr alloys (x=25 and 45 at.%) increases the transformation rate notoriously in the first hours of aging, the effect of this element being more important for alloys with Fe/Cr=1.05.     

X-ray diffraction and solid-state NMR studies of a germanium binuclear complex

A compound formulated as (C4H12N2)[Ge2(pmida)2(OH)2] x 4 H2O (where pmida(4-) = N-(phosphonomethyl)iminodiacetate and C4H12N2(2+) = piperazinedium cation), containing the anionic [Ge2(pmida)2(OH)2]2- complex, has been synthesised by the hydrothermal approach and its structure determined by single-crystal X-ray diffraction analysis. Several high-resolution solid-state magic-angle spinning (MAS) NMR techniques, in particular two-dimensional 1H-X(13C,31P) heteronuclear correlation (HETCOR) and 1H-1H homonuclear correlation (HOMCOR) experiments incorporating a frequency-switched Lee-Goldburg (FS-LG) decoupling scheme, have been employed for the first time in such a material. Using these tools in tandem affords an excellent general approach to study the structure of other inorganic-organic hybrids. We assigned the NMR resonances with the help of C...H and P...H internuclear distances obtained through systematic statistical analyses of the crystallographic data. The compound was further characterised by powder X-ray diffraction techniques, IR and Raman spectroscopy, and by elemental and thermal analyses (thermogravimetric analysis and differential scanning calorimetry).     

Determination of moxifloxacin in tablets and human urine by square-wave adsorptive voltammetry

This work presents an electroanalytical methodology developed for square-wave voltammetry based in the electrochemical reduction in hanging mercury drop electrode (HMDE), which is simple, fast, reliable and sensitive for determination of moxifloxacin (MOXI) in tablets and spiked urine human samples. The support electrolyte that provided a more defined and intense peak current for MOXI determination was the phosphate buffer 0.04 mol l^{− 1} pH 8.0. In the best-optimized conditions the drug presented an only peak of reduction at − 1.38 V vs. Ag/AgCl, using an E_acc. of − 0.30 V. An LOD of 0.44 and 3.20 ng ml^{− 1} and an LOQ of 1.46 and 10.60 ng ml^{− 1} were found for the pure standard of moxifloxacin and in the presence of matrix, respectively. A good recovery was obtained for assay spiked urine samples and a good quantification of MOXI was achieved in a commercial formulation. The methodology proposed was more sensitive than the spectrofluorimetric and spectrophotometric method with precision and accuracy equivalent.     

Pseudoesters and derivatives. XXV. 1,3-Dipolar cycloaddition of diazomethane to 5-methoxy-3-pyrrolin-2-ones

Cycloaddition of diazomethane to pyrrolinones 1a,b,d,e affords only one regioisomer as a mixture of the epimeric pyrrolopyrazolines 2 and 2 ′,4-Halo derivatives 1f,g react with diazomethane to give the two possible regioisomers 2 and 3. The regio- and stereochemistry of the adducts is evidenced by the ¹H-nmr data. The primary adducts originated from the halopyrrolinones suffer dehydrohalogenation to give aromatized products, which by further methylation give derivatives of type 7, 8, 10 and 11.     

Hydrolysis of new phthalimide-derived esters catalyzed by immobilized lipase

The last step of the production of four phthalimide-derived acids, designed to act as antiasthma drugs, was performed by enzymatic hydrolysis of the respective methyl or ethyl esters. The esters 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic methyl ester (PHT-MET), 4-ethyl-[2-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)]-phenoxyacetic ethyl ester, 4-(1,3-dioxo-1,3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester, and 2-(1,3-dioxo-1, 3-dihydro-2-isoindoylyl)-phenoxyacetic ethyl ester were hydrolyzed by immobilized lipase. The enzymatic reaction could be used only to produce the desired 4-substituted compounds. The best result that was found to hydrolysis of PHT-MET, and, therefore, that ester was selected for optimization experiments in a three-phase system. Reactions were performed with solid biocatalyst (Lipozyme® RM IM), organic solvent phase (ethyl acetate), and aqueous phase (saturated Na₂CO₃ solution). To optimize the reaction conditions, an experimental design optimization procedure was used. The variables studied were the amount of enzyme, the temperature, and the volume of the aqueous solution. Time course experiments were then performed for different initial enzyme concentrations (0.5, 0.9, and 1.4 U_H/mL of solvent). The optimized reaction conditions found were 20 mg of Lipozyme (0.9 U_H/mL_solvent) and 5.0 mL of Na₂CO_3(sat) at 40°C for 6 h.     

Stereoselective synthesis of the octahydroisobenzofuran skeleton of the eunicellins

A de novo asymmetric synthesis of the octahydroisobenzofuran skeleton contained within the eunicellin family of natural products has been completed. The key transformations involve the convergent assembly of a tetrasubstituted tetrahydrofuran by condensation of a functionalised allylsiloxane with an aldehyde; controlled epimerisation of a C4 aldehyde by intramolecular trapping; installation of the isopropyl substituent by stereoselective Michael addition to a 5,5-bicyclic enone; and ring expansion of the 5,5-system to the target structure by radical-mediated cyclopropane fragmentation.     

Purification of plasmid DNA vectors by aqueous two-phase extraction and hydrophobic interaction chromatography

The current study explores the possibility of using a polyethyleneglycol(PEG)-ammonium sulphate aqueous two-phase system (ATPS) as an early step in a process for the purification of a model 6.1 kbp plasmid DNA (pDNA) vector. Neutralised alkaline lysates were fed directly to ATPS. Conditions were selected to direct pDNA towards the salt-rich bottom phase, so that this stream could be subsequently processed by hydrophobic interaction chromatography (HIC). Screening of the best conditions for ATPS extraction was performed using three PEG molecular weights (300, 400 and 600) and varying the tie-line length, phase volume ratio and lysate load. For a 20% (w/w) lysate load, the best results were obtained with PEG 600 using the shortest tie-line (38.16%, w/w). By further manipulating the system composition along this tie-line in order to obtain a top/bottom phase volume ratio of 9.3 (35%, w/w PEG 600, 6%, w/w NH4)2 SO4), it was possible to recover 100% of pDNA in the bottom phase with a three-fold increase in concentration. Further increase in the lysate load up to 40% (w/w) with this system resulted in a eight-fold increase in pDNA concentration, but with a yield loss of 15%. The ATPS extraction was integrated with HIC and the overall process compared with a previously defined process that uses sequential precipitations with iso-propanol and ammonium sulphate prior to HIC. Although the final yield is lower in the ATPS-based process the purity grade of the final pDNA product is higher. This shows that it is possible to substitute the time-consuming two-step precipitation procedure by a simple ATPS extraction.     

Malva sylvestris L. extract suppresses desferrioxamine‐induced PGE2 and PGD2 release in differentiated U937 cells: the development and validation of an LC‐MS/MS method for prostaglandin quantification

Malva sylvestris is a species used worldwide as an alternative to anti‐inflammatory therapies; however, its mechanism of action remains unknown. In this paper, the anti‐inflammatory effects of M. sylvestris alcoholic extracts were evaluated by measuring the pro‐inflammatory mediators PGE₂ and PGD₂ in desferrioxamine‐stimulated phorbol 12‐myristate 13‐acetate‐differentiated U937 cells. An HPLC‐DAD fingerprint of the M. sylvestris extract was performed and caffeic acid, ferulic acid and scopoletin were identified and quantified. An HPLC‐MS/MS method was developed and validated to separate and measure the prostaglandins. The lower limits of detection (~0.5 ng/mL for PGE₂ and PGD₂) and quantification (1.0 ng/mL for PGE₂ and PGD₂) indicated that the method is highly sensitive. The calibration curves showed excellent coefficients of correlation (r > 0.99) over the range of 1.0–500.0 ng/mL, and at different levels, the accuracy ranged from 96.4 to 106.4% with an RSD < 10.0% for the precision study. This method was successfully applied using U937‐d cells. A significant dose‐dependent reduction of PGE₂ and PGD₂ levels occurred using 10 µg/mL (10.74 ± 2.86 and 9.60 ± 6.89%) and 50 µg/mL of extract (48.37 ± 3.24 and 53.06 ± 6.15%), suggesting that the anti‐inflammatory mechanisms evoked by M. sylvestris may be related to modulation of these mediators. Copyright © 2014 John Wiley & Sons, Ltd.     

New Route of Microwave-Assisted Synthesis of Carbon-Supported Nickel Phosphide (C/Ni2P) Nanocomposite

Abstract

A novel, fast, and easy method for synthesizing a carbon-supported Ni₂P nanocomposite (C/Ni₂P) is described. The process involves a reaction between a nickel salt, phosphoric acid, and a carbon source by utilizing microwave irradiation. The carbon source for the nanocomposite is from renewable supplies, namely, tannin and lignin. The method has successfully synthesized Ni₂P nanoparticles dispersed in a carbon matrix with a particle size ranging from 20 to 50 nm in diameter. During the microwave process, tannin and lignin provided a reducing environment in the microwave irradiation process. The synthesized products are characterized by several characterization methods. The method showed that phosphoric acid, which is a nontoxic compound, could be used as an alternative P source for synthesizing Ni₂P. The method is fast, easy, and an economical process to synthesize the carbon-coated Ni₂P nanocomposite.