Short-length microstructured phosphate glass fiber lasers with large mode areas

We report fabrication and testing of the first phosphate glass microstructured fiber lasers with large Er-Yb-codoped cores. For an 11-cm-long cladding-pumped fiber laser, more than 3 W of continuous wave output power is demonstrated, and near single-mode beam quality is obtained for an active core area larger than 400 microm2.     

Generation of watt-level single-longitudinal-mode output from cladding-pumped short fiber lasers

We generate as much as 1.6 W of continuous-wave 1550 nm single-longitudinal-mode output from a cladding pumped Er-Yb codoped phosphate fiber laser. This power is to our knowledge among the highest in single-longitudinal-mode fiber lasers. The narrowband fiber Bragg grating output coupler is demonstrated to be an effective element for providing the single-longitudinal-mode selection.     

The 5v 3 bands of 18O enriched ozone: line positions of 16O16O18O, 16O18O16O, 16O18O18O and 18O16O18O

The four 5v ₃ bands of ¹⁸O enriched ozone have been observed and analysed for the first time. Two species (¹⁶O¹⁸O¹⁶O and ¹⁸O¹⁶O¹⁸O) belong to the C_2v symmetry group and two other (¹⁸O¹⁸O¹⁶O and ¹⁶O¹⁶O¹⁸O) to the C_s symmetry group. They have been recorded at a resolution of 0.008 cm^?1 with a pathlength of 32.16 m. Despite the very weak absorptions observed, almost 250 energy levels have been derived for each of the 4 species, with J ? 35 and K _a ? 13, and suitable sets of Hamiltonian parameters have been determined. For 3 species it has been necessary to account for the resonance between the (005) and (311) states to correctly reproduce the spectra observed. These resonances, anharmonic for C_2v, and hybrid (both anhar-monic and Coriolis) for C_s symmetry confirm the accidentally extremely strong coupling between the (005) and (311) states for ¹⁶O₃, due in that case to the very close distance between unperturbed energy levels. This work also confirms the excellent prediction of band centres of these four species derived from the recently determined isotopically invariant molecular potential function.     

Single-transverse-mode output from a fiber laser based on multimode interference

An alternative original approach to achieve single-transverse-mode laser emissions from multimode (MM) active fibers is demonstrated. The fiber cavity is constructed by simply splicing a conventional passive single-mode fiber (SMF-28) onto a few centimeters-long active MM fiber section whose length is precisely controlled. Owing to the self-imaging property of multimode interference (MMI) in the MM fiber, diffraction-limited laser output is obtained from the end of the SMF-28, and the MMI fiber laser is nearly as efficient as the corresponding MM fiber laser. Moreover, because of the spectral filtering effect during in-phase MMI, the bandwidth of the MMI fiber laser is below 0.5 nm.     

Water Spectra in the Region 4200-6250 cm, Extended Analysis of ν1+ν2, ν2+ν3, and 3ν2 Bands and Confirmation of Highly Excited States from Flame Spectra and from Atmospheric Long-Path Observations

Water vapor infrared spectra have been recorded at room temperature in the range 4200-6250 cm⁻¹ at resolutions (FWHM) between 0.0053 and 0.0080 cm⁻¹. The use of a White-type multireflection cell made large pressure × pathlength products possible up to 31.27 mbar×288.5 m. The high signal-to-noise ratio allowed us to observe lines with intensities as small as 10⁻²⁶ cm⁻¹/molecule cm⁻² at T=296 K. Among about 5100 recorded water lines, about half of which are reported for the first time, 2351 lines have been assigned to the second triad of H₂¹⁶O (bands ν₁+ν₂, ν₂+ν₃, and 3ν₂). This has allowed the determination of line positions and corresponding upper rovibrational states with considerably improved accuracy. The assignments of certain highly excited states have been confirmed by the analysis of flame spectra and hot emission spectra. New values of effective Hamiltonian parameters for the upper states {(110), (030), (011)} have been determined. The generating function model was used in the data reduction to account for the anomalously strong centrifugal distortion of the rovibrational levels and resonance interactions. The RMS standard deviation of the least-squares fit of the assigned H₂O data was 5×10⁻³ cm⁻¹ for line positions and 7×10⁻³ cm⁻¹ for energy levels up to J_max=20 and K_a(max)=13. Particular attention was paid to water lines in the transparency window 4200-5000 cm⁻¹, in which existing databases are not sufficient. In this region, 1395 lines of four isotopic species of water have been recorded and over 900 accurate line positions of nine bands of H₂¹⁶O (ν₁, ν₃, 2ν₂, ν₁+ν₂, ν₂+ν₃, 3ν₂, 4ν₂−ν₂, 2ν₂+ν₃−ν₂, ν₁+2ν₂−ν₂) are reported in this range. A comparison of laboratory spectra with long path atmospheric spectra (20 km slant path in the mountains) in this region shows that many lines missing from available spectroscopic compilations (or considerably shifted compared to observations) are important for a proper interpretation of atmospheric observations. A comparison of the observed data with the best available predictions from the molecular electronic potential energy surface is discussed.     

Stability radii for some propagation models

The simple idea of Hinrichsen & Pritchard who defined thestructured stability radius has proved to be unexpectedly fruitful,generating a large amount of work and making interesting connections.The aim of this paper is twofold: to study stability radii forsome specific propagation models and to make connections withresults on Popov-type frequency-domain stability inequalities.     

Preparation, structural analysis and dielectric properties of Bi x La1−x FeO3 perovskite

Rare earth element substituted bismuth ferrites (BiFeO₃) are of enormous importance as magnetoelectric materials. The polycrystalline samples of Bi _x La_1−x FeO₃ (x=0, 0.2, 0.4, 0.6, 0.8) were prepared by solid-state reaction using standard ceramic method. The single-phase formation of these compounds was confirmed by X-ray diffraction (XRD) studies. The samples with x=0, 0.2, 0.4, 0.6 are found to be orthorhombic while the sample with x=0.8 is triclinic. The dielectric constant (ε′) and dissipation factor (tan δ) were measured in the frequency range 100 Hz to 1 MHz at room temperature and as a function of temperature at certain fixed frequencies (1 kHz, 10 kHz, 100 kHz, 1 MHz). All the samples showed dielectric dispersion. The dielectric constant with temperature shows a broad peak; the peak temperature shifts with frequency which reflects the relaxor-type behavior. The peak above 600 K in the measured temperature range corresponds to antiferromagnetic ordering temperature (Néel temperature). The broadness of the peak changes with composition. The ac conductivity as well as ε′ are found to be maximum for the sample x=0.2 at room temperature.     

Magnetoelectric effect in cobalt ferrite-barium titanate composites and their electrical properties

CoFe₂O₄-BaTiO₃ composites were prepared using conventional ceramic double sintering process with various compositions. Presence of two phases in the composites was confirmed using X-ray diffraction. The dc resistivity and thermoemf as a function of temperature in the temperature range 300 K to 600 K were measured. Variation of dielectric constant (ɛ′) with frequency in the range 100 Hz to 1 MHz and also with temperature at a fixed frequency of 1 kHz was studied. The ac conductivity was derived from dielectric constant (ɛ′) and loss tangent (tan δ). The nature of conduction is discussed on the basis of small polaron hopping model. The static value of magnetoelectric conversion factor has been studied as a function of magnetic field.