White and Red Organic Light Emitting Materials

Derivatives of 2,3-(1,4-dialkoxyaceno)norbornadiene underwent ring-opening metathesis polymerization (ROMP) upon the catalysis of a ruthenium complex to afford the corresponding polymers. The polymeric materials containing anthracene chromophores emit white electro-luminescence, which can be fabricated into light-emitting diodes (LED). The broad emission band is composed of a blue emission from anthracene and a red emission from aggregates. A single layer device, ITO/polymer/Ca/Al, can be turned on at 7V and exhibits maximum intensity 427 cd/m2 at 15 V. A double layer device, ITO/polymer/TPBI/Mg:Ag (TPBI = (2,2′,2"-(1,3,5-benzenetriyl)-tris(1-phenyl-1H-benzimidazole)) displayed blue light with turn-on voltage 6 V and maximal intensity 930 cd/m2 at 15 V.Derivatives of bisindolylmaleimide were found to form amorphous solid films which exhibit intensive red luminescence. The property of forming glasses can be ascribed to the nonplanar geometry of these molecules. LED devices were fabricated by a layer of pure dye sandwiched between two charge transporting films. The yellow emission spectrum of the devices utilizing Alq (tris(8-hydoxyquinolinato)aluminum) contains a green component from Alq. Pure red emissions can be achieved by replacing Alq with TPBI. Typical devices can be turned on at ～3 V with maximal intensity 2000 cd/m2. White color devices are under current investigation, in which the green Alq layer is replaced by its blue derivative (bis(2-methyl-8-hydoxyquinolinato)(phenolato)aluminum).     

Photoinduced electron transfer across linearly fused oligo-norbornyl structures

The rates of photoinduced electron transfer (ET) reactions across two oligo-norbornyl spacer groups (S), that is, structure 1 fused by two norbornadiene (NBD) units and structure 2 fused by three NBD units, are examined. Substituted naphthalene acted as an electron donor (D), whilst ethylene-1,2-dicarboxylate as an electron acceptor (A). ET rates were measured by fluorescence quenching experiments on these D-S-A dyads, and the results were correlated with reaction free energies according to the Marcus relationship. It was found that naphthalene with phenyl substituents showed relatively slower ET rates. The conformational flexibility of phenyl substituents may cause a hindrance on the electronic coupling between D and A. Another salient feature was the abnormally high quenching rates observed in nonpolar solvents such as cyclohexane, the results of which may be ascribed to a competing energy transfer process.     

Piptigrine, a new insecticidal amide from Piper nigrum Linn

A new insecticidal amide piptigrine (1) possessing highly extended conjugation was isolated from the dried ground seeds of Piper nigrum Linn. along with the known amides piperine and wisanine (hitherto unreported from this plant). The structure of 1 has been elucidated as 1-[9-(3',4'-methylenedioxyphenyl)-4E,6E,8E-nonatrienoyl]piperidine through extensive 1D- and 2D-NMR (COSY-45, NOESY, J-resolved, HMQC, HMBC and NOESY studies. The known compounds have been identified through comparison of their spectral data with those reported in literature. 1 exhibited toxicity of 15.0 ppm against fourth instar larvae of Aedes aegypti Liston.     

Plasma-Assisted ALD of Highly Conductive HfNx: On the Effect of Energetic Ions on Film Microstructure

Plasma Chemistry and Plasma Processing - In this work, we report on the atomic layer deposition (ALD) of HfNx thin films by employing CpHf(NMe2)3 as the Hf(IV) precursor and Ar–H2 plasma in...     

Density functional theory analysis of a mixed‐ligand iridium compound for multi‐color organic light‐emitting diodes

Electronic states and their energies are calculated for a mixed‐ligand Ir(III) compound, (5‐chloro‐8‐hydroxyquinoline) bis(2‐phenylpyridyl) iridium (called IrQ(ppy)₂‐5Cl) using time‐dependent density functional theory (TDDFT) calculations and are compared with the experimental result. A good agreement is obtained between the calculated and measured absorption spectra. The d‐π_Q* molecular orbital transition gives the lowest‐energy triplet state absorption band. Its energy is estimated as 1.84 eV (671 nm), which is close to the absorption band position of 1.86 eV (666 nm) observed for IrQ(ppy)₂‐5Cl doped in 4,4′‐N,N′‐dicarbazole‐biphenyl (CBP) host and of 1.88 eV (660 nm) observed for IrQ(ppy)₂‐5Cl doped in polystyrene (PS). The second triplet state absorption band is caused by d‐π_ppy transition. Its position is calculated as 2.51 eV (494 nm). The dipole moment is estimated as 3.45 D, which is lower than the dipole moment of fac‐Ir(ppy)₃. This is understood by a reduced charge transfer between Ir(III) and quinoline ligand. Copyright © 2008 John Wiley & Sons, Ltd.     

Phytochemical studies on the seed extract of Piper nigrum Linn

The petroleum ether extract of dried ground seeds of Piper nigrum Linn. and some column fractions of this extract were subjected to GC and GC-MS analysis, resulting in the identification of fourteen compounds (1-14) by using NIST Mass spectral search program 1998 and the Kovat's retention indices. Ten of the compounds (1, 2, 4-12) are reported for the first time from this plant. All the fractions showed insecticidal activity against the fourth instar larvae of Aedes aegypti and against the fourth instar larvae of Anopheles stephensi Liston, determined by the WHO method.     

New insecticidal amides from petroleum ether extract of dried Piper nigrum L. whole fruits

The petroleum ether extract of dried ground whole fruits of Piper nigrum L. afforded 20 compounds (1-20) including two new insecticidal amides named as pipnoohine (1), and pipyahyine (2), seven reported for the first time from this plant (12, 13, 15-17, 19, 20), and eleven known compounds (3-11, 14, 18). The structure of 1 has been elucidated as (2E,4E,12Z)-N-(4-methylpentyl)octadeca-2,4,12-trienamide and that of 2 as (2E,4E,11E)-12-(benzo[1,3]dioxol-5-yl)-N-(3-methylbutyl)dodeca-2,4,11-trien-amide through extensive ID-, 2D-NMR spectral studies and chemical reactions. The known compounds have been identified through comparison of their spectral data with those reported in literature. 1 and 2 exhibited toxicity at 35.0 and 30.0 ppm respectively against fourth instar larvae of Aedes aegypti L. by WHO method.     

Isolation and structure determination of a benzofuran and a bis-nor-isoprenoid from Aspergillus niger grown on the water soluble fraction of Morinda citrifolia Linn. leaves

The leaves of Morinda citrifolia, Linn. afforded a new benzofuran and a bis-nor-isoprenoid, blumenol C, hitherto unreported from this source. The structures of these have been elucidated as 5-benzofuran carboxylic acid-6-formyl methyl ester (1) and 4-(3'(R)-hydroxybutyl)-3,5,5, trimethyl-cyclohex-2-en-1-one (2) respectively through spectroscopic studies. The NMR data (including 1D, 2D techniques) and stereochemistry at C-3' of Compound 2 is also being reported for the first time.     

Adsorption of isoniazid onto sepiolite–palygorskite group of clays: An IR study

The adsorption of isoniazid (INH) on sepiolite, loughlinite (natural Na-sepiolite) and palygorskite from Anatolia was investigated by FT-IR spectroscopy. Experimental results indicated that INH molecules, adsorbed on sepiolite–palygorskite group of clays, are coordinated to surface hydroxyls by H-bonding interaction through the pyridine ring nitrogen lone pairs. Moreover, some of the adsorbed INH molecules may enter the interior channels of the sepiolite–palygorskite structure and involve H-bonding interaction with zeolitic water. Some intensity and frequency changes in the OH stretching band of surface hydroxyls (Si–OH) of the INH-treated sepiolite and loughlinite were observed. However, this band is found to be less affected by the adsorption of isoniazid in the case of palygorskite, probably because the surface Si–OH groups in palygorskite appear to be less abundant than in sepiolite or loughlinite.     

Synthesis,Spectroscopic Studies and Structure of 2-[(Benzo[<Emphasis Type="Italic">d</Emphasis>]thiazol-2-ylamino)methyl]phenol

Abstract  

Schiff base (E)-2-[(benzo[d]thiazol-2-ylimino)methyl]phenol (1) has been synthesized from the reaction of 2-hydroxy-benzaldehyde with 2-aminobenzothiazole. The 2-[(benzo[d]thiazol-2-ylamino)methyl]phenol (2) was prepared reduction of the Schiff base 1 with sodium borohydride. The compounds 1 and 2 have been characterized by elemental analysis, FT-IR, ¹H-NMR, ¹³C-NMR and UV–visible spectroscopic techniques. The structure of the compound 2 has also been examined crystallographically. The compound 2 crystallizes in the monoclinic space group P2/c. The unit cell parameters were found as a = 10.017(1), b = 11.725(1), c = 10.341(1) ?, V = 1208.1(1) ?³, D _x = 1.409 g cm⁻³ and Z = 4. The crystal structure was solved by direct methods and refined by the full-matrix least squares method and found as R ₁ = 0.0308 and wR ₂ = 0.0818 for 2032 for the observed reflections [I > 2σ(I)].