A dried blood spot assay with HPLC–MS/MS for the determination of larotrectinib in mouse blood and its application to a pharmacokinetic study

Larotrectinib is a first-generation tropomyosin kinase inhibitor, approved for the treatment of solid tumors. In this paper, we present a validated dried blood spot (DBS) method for the quantitation of larotrectinib from mouse blood using HPLC–MS/MS, which was operated under multiple reaction monitoring mode. To the DBS disc cards, acidified methanol enriched with internal standard (IS; enasidenib) was added and extracted using tert-butyl methyl ether as an extraction solvent with sonication. Chromatographic separation of larotrectinib and the IS was achieved on an Atlantis dC₁₈ column using 10 mm ammonium formate–acetonitrile (30:70, v/v) delivered at a flow-rate of 0.80 ml/min. Under these optimized conditions, the retention times of larotrectinib and the IS were ~0.93 and 1.37 min, respectively. The total run time was 2.50 min. Larotrectinib and the IS were analyzed using positive ion scan mode and parent–daughter mass to charge ion (m/z) transitions of 429.1 → 342.1 and 474.1 → 267.1, respectively, were used for the quantitation. The calibration range was 1.06–5,080 ng/ml. No matrix effect or carryover was observed. Hematocrit did not influence DBS larotrectinib concentrations. All of the validation parameters met the acceptance criteria. The applicability of the validated method was shown in a mouse pharmacokinetic study.     

An EOQ model with process reliability considerations

The classical economic order quantity (EOQ) model assumes that items produced are of perfect quality and that the unit cost of production is independent of demand. However, in realistic situations, product quality is never perfect, but is directly affected by the reliability of the production process. In this paper, we consider an EOQ model with imperfect production process and the unit production cost is directly related to process reliability and inversely related to the demand rate. In addition, a numerical example is given to illustrate the developed model. Sensitivity analysis is also performed and discussed.     

Transition of 3D to 2D growth modes of InAs grown on GaAs

We report a method to grow thin strain-released InAs layer on GaAs (1 0 0) substrates by molecular beam epitaxy. We have shown that by controlling the growth parameters, a thin 2D InAs layer can be grown during initial stages, which eventually serves as a buffer layer to trap dislocations and epitaxial regrowth of InAs on this buffer results in high crystal quality. The size dependence of the InAs islands formed during initial stages with growth time has been studied by atomic force microscopy. With continuous short-time epitaxial growth during various stages, the InAs growth mode transfers from 3D to 2D. The introduction of dislocations into InAs epitaxial islands and their behavior during initial growth stage has been theoretically studied. The theoretical results are in remarkable agreement with the experimental results and shows that once the film is formed, the film strain is totally relaxed. The 200 nm thick InAs epilayer grown on this buffer shows a narrow X-ray diffraction peak. Such InAs strain-released buffer layer would be useful for regrowth of high In content based materials on top of it for electronics and optoelectronics device applications.     

Tamarindus indica mucilage and its acrylamide-grafted copolymer as flocculants for removal of dyes

The application of Tamarindus indica seed mucilage (Tam), a food grade polysaccharide, and its acrylamide grafted copolymer as flocculants was assessed for the first time for removal of various types of dyes from model textile wastewater containing azo, basic, and reactive dyes. Acrylamide grafted T. indica mucilage (Tam-g-PAM) was obtained by ceric ion initiated polymerization technique. A series of contact time experiments were conducted to assess the system variables such as concentrations of mucilage and dyes and pH. These flocculants reduce the dye concentration by flocculation and settling. The grafted copolymer, Tam-g-PAM showed better results for dye removal. The optimal flocculant concentration, which was required to effect flocculation, was independent of dye concentration within the range examined. Both the flocculants performed better for removal of azo dyes than for reactive and basic dyes.     

A relaxation study of poled nonlinear optical polymers by infrared reflection-absorption spectroscopy

The relaxation of poled nonlinear optical (NLO) chromophores in polymer films was characterized by infrared (i.r.) reflection-absorption spectroscopy. Both a guest-host system and a photocrosslinkable polymer system were investigated. Polymethylmethacrylate doped with either 2-methyl-4-nitroaniline or 4(4′-nitrophenylazo)aniline was studied. The photocrosslinkable polymer system, polyvinylcinnamate doped with 3-cinnamoyloxy-4-[4-(N,N-diethylamino)-2-cinnamoyloxy phenyl azo]nitrobenzene was also investigated. Doped NLO active molecules were aligned using the corona poling technique. i.r. spectra as a function of time were used to monitor the relaxation behavior of the oriented dyes after poling. Relaxation of NLO molecules was followed at various characteristic vibrational frequencies. The relaxation behavior of both systems were found to be consistent with those studied by the second harmonic generation technique.     

Kinetics ofEDTA substitution of N,N′-ethylenedisalicylamidato cuprate(II) in alkaline media

Summary The kinetics ofEDTA reaction with N,N-ethylenedisalicylamidato cuprate(II) is followed at 30°C in borate buffer and is found to be first order in each reactant. The reaction ispH dependent and involves protonation of a deprotonated peptide nitrogen followed by nucleophilic attack byEDTA.

---

Kinetik derEDTA-Substitution von N,N-Ethylendisalizylamidatokupfer(II) in alkalischem Medium (Kurze Mitt.)

Zusammenfassung Die Kinetik derEDTA-Reaktion mit N,N-Ethylendisalizylamidatokupfer(II) wurde bei 30°C in Borat-Puffer verfolgt. Es wurde erste Ordnung bezüglich jedes Reaktanden festgestellt. DiepH-abhängige Reaktion beinhaltet die Protonierung eines deprotonierten Peptid-Stickstoffs, gefogt von einem nucleophilen Angriff einesEDTA-Moleküls.

     

Mixed chelates of some trivalent lanthanide ions containing (trans-1,2-cyclhexylenedinitrilo)tetraacetate and norleucinate

Summary Formation constants of mixed chelates with (trans-1,2-cyclohexylenedinitrilo)tetra-acetate (DCTA) as primary ligand and norleucinate (nle) as secondary ligand with metal ions La(III), Ce(III), Pr(III), Sm(III), Gd(III), Tb(III), Dy(III), Er(III), and Yb(III) have been determined by the modified potentiometricpH titration method of Irving-Rossotti in aqueous medium at (295±1) K and fixed ionic strength of =0.1M (NaClO₄). Formation constants of binary complexes of the metal ions with the secondary ligand have also been determined under identical conditions. The mixed chelates were found to be more stable than the binary ones. The order of stabilities in terms of metal ions is La(III)Gd(III)

Gemischte Chelate einiger dreiwertiger Lanthanidenionen mit (trans-1,2-Cyclohexylendinitril)tetraacetat und Norleucinat

Zusammenfassung Es wurden die Komplexbildungskonstanten gemischter Chelate mit (trans-1,2-Cyclohexylendinitril)tetraacetat als Primärkomponente und Norleucinat als Sekundärkomponente mit den Metallionen La(III), Ce(III), Pr(III), Sm(III), Gd(III), Tb(III), Dy(III), Er(III) und Yb(III) mittels einer modifizierten potentiometrischen Titrationsmethode nach Irving-Rossotti in wäßrigem Medium bei (295±1) K und einer konstanten Ionenstärke von =0.1M (NaClO₄) bestimmt. Die Bildungskonstanten der binären Komplexe der Metallionen mit dem Sekundärliganden wurden ebenfalls unter identen Bedingungen bestimmt. Es wurde festgestellt, daß die gemischten Chelate stabiler sind als die binären. Die Stabilitätsreihenfolge bezüglich der Metallionen ist La(III)Gd(III)     

Retardation of Permanganate-Initiated Polymerization of Acrylonitrile by Phenol

The mechanism and kinetics of the retardation of the permanganate-initiated polymerization of acrylonitrile by phenol have been studied in the temperature range of 30 to 45°C. The effect of monomer, metal ion, phenol, sulfuric acid, organic solvents, and some inorganic salts on the polymerization has been studied. The most remarkable observation in the present investigation was the negative intercept obtained from a plot of [M]/R_p versus 1/[M] of the rate mechanism, This observation appears to be a general phenomenon for all inhibiting substrates. A reaction mechanism has been suggested and a suitable rate law has been proposed.     

A novel method for measurement of concentration using two dimensional photonic crystal structures

A novel method to measure the concentration of sugar, sodium chloride and alcohol, in their aqueous solution by using two dimensional photonic crystal structures is presented. This measurement is very accurate as the principle is based on variation of photonic band gap with respect to concentration. Photonic band gap here is computed using plane wave expansion method.     

Structural,electronic, and mechanical properties of cubic TiO_2:A first-principles study

We present an analysis of structural, electronic, and mechanical properties of cubic titanium dioxide(TiO_2) using an all electron orthogonalzed linear combinations of atomic orbitals(OLCAO) basis set under the framework of density functional theory(DFT). The structural property, especially the lattice constant a, and the electronic properties such as the band diagram and density of states(DOS) are studied and analyzed. The mechanical properties such as bulk moduli, shear moduli, Young's Moduli, and Poison's ratio are also investigated thoroughly. The calculations are carried out on shear moduli and anisotropy factor for cubic TiO_2. The Vickers hardness is also tested for fluorite and pyrite cubic-structured TiO_2. Furthermore, the results are compared with the previous theoretical and experimental results. It is found that DFTbased simulation produces results which are approximation to experimental results, whereas the calculated elastic constants are better than the previous theoretical and experimental values.