A three-component cyclocondensation reaction for the synthesis of new triazolo[1,5-a]pyrimidine scaffolds using 3-aminotriazole,aldehydes and ketene N,S-acetal

Molecular Diversity - This study describes the use of 3-aminotriazole, different aldehydes and N-methyl-1-(methylthio)-2-nitroethenamine as a ketene N,S-acetal in a three-component condensation for...     

Synthesis and application of cinnamate-functionalized rubber for the preparation of UV-curable films

A butyl rubber derivative that can be cured upon exposure to UV light in the absence of additional chemical additives was developed. This polymer was prepared by the reaction of hydroxyl-functionalized butyl rubber with cinnamoyl chloride to provide a cinnamate functionalized rubber. The cinnamate content was varied by starting with derivatives prepared from butyl rubber containing either 2 or 7 mol% isoprene. The kinetics of the cross-linking was studied by UV–visible spectroscopy and it was found to vary according to the film thickness. The changes in gel content and volume swelling ratio with irradiation time were dependent on the cinnamate content. Toxicity studies suggested that the cross-linked materials do not leach toxic molecules. The approach was also applied to obtain cross-linked films of butyl rubber-poly(ethylene oxide) graft copolymers, leading to surfaces that resisted the adhesion and growth of cells. Thus the approach is versatile and is of particular interest when non-leaching coatings of cross-linked butyl rubber are desired for biomedical or other applications.     

Synthesis of Poly (methyl methacrylate)/Zinc Oxide Nanocomposite with Core-Shell Morphology by Atom Transfer Radical Polymerization

A method to prepare zinc oxide (ZnO) nanoparticles with a covalently bonded poly(methyl methacrylate) (PMMA) shell by surface initiated atom transfer radical polymerization (ATRP) was reported. First, the initiator for ATRP was covalently bonded onto the surface of zinc oxide nanoparticles through our novel method. Firstly, the surface of ZnO nanoparticle was treated with 3-aminopropyl triethoxysilane, a silane coupling agent, and then this functionalization nanoparticle was reacted with α-chloro phenyl acetyl chloride to prepare atom transfer radical polymerization macroinitiator. The metal-catalyzed radical polymerization of MMA with ZnOmacroinitiator was performed using a copper catalyst system to give the ZnO-based nanoparticles hybrids linking PMMA segments (poly (methyl methacrylate)/zinc oxide nanocomposite). These hybrid nanoparticles had an exceptionally good dispersability in organic solvents and were subjected to detailed characterization using FTIR, TEM and TGA and DSC analyzed.     

Biogas Production from N-Methylmorpholine-N-oxide (NMMO) Pretreated Forest Residues

Lignocellulosic biomass represents a great potential for biogas production. However, a suitable pretreatment is needed to improve their digestibility. This study investigates the effects of an organic solvent, N-Methylmorpholine-N-oxide (NMMO) at temperatures of 120 and 90 °C, NMMO concentrations of 75 and 85 % and treatment times of 3 and 15 h on the methane yield. The long-term effects of the treatment were determined by a semicontinuous experiment. The best results were obtained using 75 % NMMO at 120 °C for 15 h, resulting in 141 % increase in the methane production. These conditions led to a decrease by 9 % and an increase by 8 % in the lignin and in the carbohydrate content, respectively. During the continuous digestion experiments, a specific biogas production rate of 92 NmL/gVS/day was achieved while the corresponding rate from the untreated sample was 53 NmL/gVS/day. The operation conditions were set at 4.4 gVS/L/day organic loading rate (OLR) and hydraulic retention time (HRT) of 20 days in both cases. NMMO pretreatment has substantially improved the digestibility of forest residues. The present study shows the possibilities of this pretreatment method; however, an economic and technical assessment of its industrial use needs to be performed in the future.     

Synthesis,characterization, and design of a photocatalyst based on BiOBr nanoplates and tin porphyrin with enhanced visible light photocatalytic activity

Research on Chemical Intermediates - The bismuth oxybromide (BiOBr) photocatalyst was first synthesized via a simple co-precipitation method. To improve the visible light photocatalytic activity of...     

Design and characteristics of tin (II) optode based on immobilization of dithizone on a triacetylcellulose membrane and its application in canned foods

Abstract  

The characterization of an optical sensor membrane is described for the determination of tin (II) based on the immobilization of dithizone on a triacetylcellulose membrane. The membrane responds to tin (II) ions by changing color reversibly from green to red in buffer solution at pH 6 and wavelength 611 nm. This optode has a linear range of 0.3–6.33 μg cm⁻³ (2.52–53.32 μmol dm⁻³) of Sn²⁺ ions with a limit of detection of 0.15 μg cm⁻³ (1.26 μmol dm⁻³). The response time of the optode was about 8–10 min depending on the concentration of Sn²⁺ ions. The selectivity of the optode to tin (II) ions at pH 6 was good. The sensor can be readily regenerated by exposure with EDTA solution. The color is fully reversible, and the optical sensor could be fully regenerated. Experimental results showed that the optode could be used as an effective tool in analyzing the tin content in canned foods.     

Evaluation of selective composite cryogel for bromate removal from drinking water

Bromate, which is a potential carcinogen, should be removed from drinking water to levels of less than 10 μg/L. A chitosan‐based molecularly imprinted polymer (MIP) and a sol–gel ion‐exchange double hydrous oxide (Fe₂O₃·Al₂O₃·xH₂O) adsorbent (inorganic adsorbent) were prepared for this purpose. The sorption behavior of each adsorbent including sorption kinetics, isotherms, effect of pH and selective sorption were investigated in detail. Sorption experimental results showed that the MIP adsorbents had better selectivity for bromate, even in the presence of high concentrations of nitrate, as compared to the inorganic adsorbent. It was found that pH does not affect the adsorption of bromate when using the inorganic adsorbent. Additionally, both adsorbents were immobilized in a polymeric cryogel inside plastic carriers to make them more practical for using in larger scale. Regeneration of the cryogels either containing MIP or inorganic adsorbents were carried out by 0.1 M NaOH and 0.1 M NaCl, respectively. It was found that the regenerated MIP and inorganic adsorbents could be used at least three and five times, respectively, without any loss in their sorption capacity.     

Study of the oxidation of some catechols in the presence of 4‐amino‐3‐thio‐1,2,4‐triazole by digital simulation of cyclic voltammograms

Electrochemical oxidation of catechol and its derivatives ( 1a–d ) has been studied in the presence of 4‐amino‐3‐thio‐1,2,4‐triazole ( 3 ) at various pHs. Some electrochemical techniques such as cyclic voltammetry using the diagnostic criteria derived by Nicholson and Shain for various electrode mechanisms and controlled‐potential coulometry were used. Results indicate the participation of catechols ( 1a–d ) with 3 in an intramolecular cyclization reaction to form the corresponding 1,2,4‐triazino[5,4‐b]‐1,3,4‐thiadiazine derivatives. In various scan rates, based on an electron transfer–chemical reaction–electron transfer–chemical reaction mechanism, the observed homogeneous rate constants (k_obs) for Michael addition reaction were estimated by comparing the experimental cyclic voltammetric responses with the digital simulated results. The oxidation reaction mechanism of catechols ( 1a–d ) in the presence of 4‐amino‐3‐thio‐1,2,4‐triazole ( 3 ) was also studied. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 340–345, 2007     

Modified carbon nanotubes as a sorbent for solid-phase extraction of gold,and its determination by graphite furnace atomic absorption spectrometry

A simple, sensitive and accurate method was developed for solid-phase extraction and preconcentration of trace levels of gold in various samples. It is based on the adsorption of gold on modified oxidized multi-walled carbon nanotubes prior to its determination by graphite furnace atomic absorption spectrometry. The type and volume of eluent solution, sample pH value, flow rates of sample and eluent, sorption capacity and breakthrough volume were optimized. Under these conditions, the method showed linearity in the range of 0.2–6.0 ng L⁻¹ with coefficients of determination of >0.99 in the sample. The relative standard deviation for seven replicate determinations of gold (at a level of 0.6 ng L⁻¹) is ±3.8 %, the detection limit is 31 pg L⁻¹ (in the initial solution and at an S/N ratio of 3; for n = 8), and the enrichment factor is 200. The sorption capacity of the modified MWCNTs for gold(III) is 4.15 mg g⁻¹. The procedure was successfully applied to the determination of gold in (spiked) water samples, human hair, human urine and standard reference material with recoveries ranging from 97.0 to 104.2 %.

A sorbent based on modified carbon nanotubes was prepared and used to extract gold ion from various samples prior to its determination by graphite furnace atomic absorption spectrometry

     

Reverse phase HPLC determination of sunitinib malate using UV detector,its isomerisation study,method development and validation

Sunitinib malate, as an anticancer compound and a multi-targeted tyrosine-kinase inhibitor for treatment of glioma, was comprehensively studied by using different liquid chromatography methods. Since sunitinib malate shows Z-E isomerism, various reverse phase high performance liquid chromatography (RP-HPLC) programs were designed to access quantitative determination and good separation of Z-E stereoisomers. Moreover, some impurities including N-oxide and impurity B were to be separated from the main isomer with acceptable resolution. In the present work, different RP-HPLC programs were developed in which the type of mobile phase, flow rate, pH, and temperature were optimized to reach the best analysis conditions and control the rate of Z to E conversion. In addition, the effect of some operational parameters during the solution preparation including initial concentration of the analyte, temperature, pH, and type of solvent on the stability of Z isomer were investigated. The opted conditions for quantitative analysis were C8-Hector column as stationary phase, methanol as solvent, ammonium acetate buffer containing triethylamine as mobile phase, the pH of mobile phase of 8.5, the flow rate of 1.0 mL/min, and detection at 425 nm. In this situation the peaks of E and Z isomers were at 16.3 and 19.7 min. Full validation of the designed method was done based on ICH guidelines.