Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Modification of magnetic anisotropy in metallic glasses using high-energy ion beam irradiation

Heavy ion irradiation in the electronic stopping power region induces macroscopic dimensional change in metallic glasses and introduces magnetic anisotropy in some magnetic materials. The present work is on the irradiation study of ferromagnetic metallic glasses, where both dimensional change and modification of magnetic anisotropy are expected. Magnetic anisotropy was measured using Mössbauer spectroscopy of virgin and irradiated Fe₄₀Ni₄₀B₂₀ and Fe₄₀Ni₃₈Mo₄B₁₈ metallic glass ribbons. 90 MeV ¹²⁷I beam was used for the irradiations. Irradiation doses were 5×10¹³ and 7.5×10¹³ ions/cm². The relative intensity ratios D ₂₃ of the second and third lines of the Mössbauer spectra were measured to determine the magnetic anisotropy. The virgin samples of both the materials display in-plane magnetic anisotropy, i.e., the spins are oriented parallel to the ribbon plane. Irradiation is found to cause reduction in magnetic anisotropy. Near-complete randomization of magnetic moments is observed at high irradiation doses. Correlation is found between the residual stresses introduced by ion irradiation and the change in magnetic anisotropy.     

An Anthracene-Based Metal-Organic Framework for Selective Photo-Reduction of Carbon Dioxide to Formic Acid Coupled with Water Oxidation

A Zr-based metal-organic framework has been synthesized and employed as a catalyst for photochemical carbon dioxide reduction coupled with water oxidation. The catalyst shows significant carbon dioxide reduction property with concomitant water oxidation. The catalyst has broad visible light as well as UV light absorption property, which is further confirmed from electronic absorption spectroscopy. Formic acid was the only reduced product from carbon dioxide with a turn-over frequency (TOF) of 0.69 h⁻¹ in addition to oxygen, which was produced with a TOF of 0.54 h⁻¹. No external photosensitizer is used and the ligand itself acts as the light harvester. The efficient and selective photochemical carbon dioxide reduction to formic acid with concomitant water oxidation using Zr-based MOF as catalyst is thus demonstrated here.     

Theoretical investigation of the molecular structure,vibrational spectra,and molecular docking of tramadol using density functional theory

The optimized molecular structures, harmonic vibrational wavenumbers, and the corresponding vibrational assignments of (1S,2S)-tramadol and (1R,2R)-tramadol are computationally examined using the B3LYP density functional theory method together with the standard 6–311++G(d,p) and def2-TVZP basis sets. The optimized structures show that phenolic rings of both 1R,2R and 1S,2S tramadol adopt planar geometry, which are slightly distorted due to the substitution at the meta-position; and the six-membered cyclohexane adopts a slightly distorted chair conformation. The 1S,2S enantiomer is energetically more favorable than 1R,2R with the energy differences of 1.32 and 1.03 kcal/mol obtained at B3LYP/6–311++G(d,p) and B3LYP/Def2-TVZP levels, respectively. The analysis of the binding pocket in the silico molecular docking with the m-opioid receptor shows that it originated two clusters with the 1S,2S enantiomer and one cluster with the 1R,2R enantiomer of tramadol. The results point to a more stable complex of the m-opioid receptor with the 1R,2R enantiomer of tramadol.     

Low temperature survival of slender naiad (Najas flexilis) seeds

The response to drying and storage at -20 degrees C or in liquid nitrogen was studied in seeds of the freshwater aquatic plant Najas flexilis. The seeds of this species show some desiccation sensitivity, although post-harvest storage in water at 16 degrees C resulted in improvements in desiccation tolerance. There was 63% germination of seeds dried to 9.5% moisture content (30% RH) following this maturation period. Optimum moisture contents for seeds stored at -20 degrees C for 3 months and in liquid nitrogen for 1 week were ~11% and ~15%, respectively.     

Investigation into the rotational bands of ~(185)Pt with the particle-rotor model

Theoretical calculations have been performed for the ν9/2+[624](i13/2) and ν7/2-[503](f7/2) bands of 185Pt in the framework of particle-rotor model. The band properties of signature splitting and configuration mixing have been analyzed. The level energy and signature splitting before the band crossing can be well interpreted by introducing triaxiality. The positive-parity yrast band is pro posed to be dominated by the ν9/2+[624](i13/2) component, while the negative-parity band shows strong mixing of ν7/2-[5...     

Nanotechnology in the public eye: the case of Iran,as a developing country

Using survey data, public awareness of and attitudes toward nanotechnology are examined in Iran (N = 759). Iran is a developing country with a national nanotechnology action plan for a ten year period starting from 2003 and has been active in the field of research and development of nanotechnology meanwhile. First, the results show that majority of people are still not familiar with nanotechnology and perceived risks posed by this technology are not considered to be a lot and most people feel its benefits outweigh the risks. The emotions toward this technology are of a hopeful and positive nature and this technology is looked upon favorably in Iran. In particular, our results reveals that although the level of trust is high specially in scientists to communicate the risks with the public, there are a great number who just have some trust not quite a lot of it. Knowing that it is a hard and time-consuming effort to manage a nation’s view on nanotechnology, extensive research as well as collaboration with other countries is needed to effectively communicate the risks in time.     

Morphology and magnetic properties of FeCo nanocrystalline powder produced by modified mechanochemical procedure

Properties of FeCo nanocrystalline intermetallic powders prepared by salt-matrix hydrogen reduction of a milled Fe₂O₃-Co₃O₄ mixture were investigated. The product of 72 ks ball-milling at 350 rpm was CoFe₂O₄ nanopowder. Reduction of this powder for 3.6 ks by hydrogen at 750 °C resulted in the formation of Fe_0.67Co_0.33 stoichiometric compound. Scanning electron microscopy, electron dispersive spectrometry, X-ray diffraction and vibrating sample magnetometry were used to characterize the nanopowder. Using a salt-matrix (NaCl as a dispersion medium) resulted in the decrease of the reduction temperature and improvement of the morphology and magnetic properties of the nanopowder. Dispersion of the ball-milled product in Hexan resulted in further improvements of the magnetic properties.     

Self-assembly of boehmite nanopetals to form 3D high surface area nanoarchitectures

A flower-like boehmite nanostructure was prepared through a template-free chemical route by the self-assembly process of nanosize petals 800–1000 nm long, 200–250 nm wide, 20–50 nm thick and having an average crystallite size of about 2.21 nm. X-ray diffraction analysis (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), DTA/TGA analyses and Brunauer–Emmet–Teller (BET-N₂) analyses were used in order to characterize the product obtained. XRD results exhibited that the obtained nanostructures composed of pure orthorhombic AlOOH phase. The effects of Cl⁻ ions and TEA on the growth of boehmite three-dimensional nanoarchitectures in the presence of NO₃^-\mathrm{NO}_{3}^{-} ions were investigated. BET analyses of as-prepared material demonstrate that this nanostructure material has a high specific surface area, as high as 123 m² g⁻¹.     

Growth of tin oxide nanotubes by aerial carbothermal evaporation

One-dimensional nanostructures of tin oxide nanotubes were fabricated by carbothermal evaporation at 900°C in air. The synthesized film was grown on Au-coated (100) Si substrate. Heterogeneous catalysis by Au/Sn droplets assisted the formation of the tin oxide nanotubes of less than 40 nm diameter at Sn vapor pressures around 1.4×10⁻⁷ Pa. In order to reduce the nanotube diameter further, an increase in the Sn vapor pressure by changing the source materials’ ratio seemed viable.